[PATCH 0/3] Add MX51 basic DT support

[Jason Liu]

This patchset adds FSL mx51 device tree support. This
is based on

git://git.secretlab.ca/git/linux-2.6 devicetree/test

This patch has been tested on MX51 babbage board and can
boot up succesfully to linux console with DT enabled.

Jason Liu (3):
  arm/dt: add basic mx51 device tree support
  arm/dt: add very basic dts file for babbage board
  serial/imx: parse from device tree support

 arch/arm/boot/dts/babbage.dts           |  117 +++++++++++++++++++++++++++++++
 arch/arm/mach-mx5/Kconfig               |    6 ++
 arch/arm/mach-mx5/Makefile              |    1 +
 arch/arm/mach-mx5/board-dt.c            |   64 +++++++++++++++++
 arch/arm/mach-mx5/clock-mx51-mx53.c     |   45 ++++++++++++-
 arch/arm/plat-mxc/include/mach/common.h |    1 +
 drivers/tty/serial/imx.c                |   81 +++++++++++++++++++---
 7 files changed, 304 insertions(+), 11 deletions(-)
 create mode 100644 arch/arm/boot/dts/babbage.dts
 create mode 100644 arch/arm/mach-mx5/board-dt.c
 mode change 100644 => 100755 drivers/tty/serial/imx.c