[PATCH 3/4 v3] tty: serial: altera_uart: Add devicetree support

[Tobias Klauser]

With the recent switch of the (currently still out-of-tree) Nios2 Linux
port to devicetree we want to be able to retreive the resources and
properties from dts.

The old method to retreive resources and properties from platform data
is still supported.

Cc: Grant Likely <grant.likely at secretlab.ca>
Signed-off-by: Tobias Klauser <tklauser at distanz.ch>
---

Greg: This patch will have the same compile problem in your tree as the
altera_jtaguart patch has. As this patch depends on the previous ones of
this series it might be best to apply it once commit c9e358dfc
"driver-core: remove conditionals around devicetree pointers" from
Grant's tree is merged.

Thanks to Grant Likely and Thomas Chou for their comments.

v3:
 - Change order for getting uartclk.
v2:
 - fall back to uartclk from platform data if the device tree property
   is not available.
 - Only include MODULE_DEVICE_TABLE if CONFIG_OF is set so we don't
   advertise device tree support if CONFIG_OF isn't active.
 - change vendor prefix in match table to be uppercase for consistency
   with documentation

 .../devicetree/bindings/serial/altera_uart.txt     |    7 +++
 drivers/tty/serial/altera_uart.c                   |   51 ++++++++++++++++++--
 2 files changed, 54 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/serial/altera_uart.txt

diff --git a/Documentation/devicetree/bindings/serial/altera_uart.txt b/Documentation/devicetree/bindings/serial/altera_uart.txt
new file mode 100644
index 0000000..71cae3f
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/altera_uart.txt
@@ -0,0 +1,7 @@
+Altera UART
+
+Required properties:
+- compatible : should be "ALTR,uart-1.0"
+
+Optional properties:
+- clock-frequency : frequency of the clock input to the UART
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index 5e80977..6a1ebd9 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -24,6 +24,7 @@
 #include <linux/serial.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
 #include <linux/io.h>
 #include <linux/altera_uart.h>
 
@@ -484,6 +485,29 @@ static struct uart_driver altera_uart_driver = {
 	.cons		= ALTERA_UART_CONSOLE,
 };
 
+#ifdef CONFIG_OF
+static int altera_uart_get_of_uartclk(struct platform_device *pdev,
+				      struct uart_port *port)
+{
+	int len;
+	const __be32 *clk;
+
+	clk = of_get_property(pdev->dev.of_node, "clock-frequency", &len);
+	if (!clk || len < sizeof(__be32))
+		return -ENODEV;
+
+	port->uartclk = be32_to_cpup(clk);
+
+	return 0;
+}
+#else
+static int altera_uart_get_of_uartclk(struct platform_device *pdev,
+				      struct uart_port *port)
+{
+	return -ENODEV;
+}
+#endif /* CONFIG_OF */
+
 static int __devinit altera_uart_probe(struct platform_device *pdev)
 {
 	struct altera_uart_platform_uart *platp = pdev->dev.platform_data;
@@ -491,6 +515,7 @@ static int __devinit altera_uart_probe(struct platform_device *pdev)
 	struct resource *res_mem;
 	struct resource *res_irq;
 	int i = pdev->id;
+	int ret;
 
 	/* -1 emphasizes that the platform must have one port, no .N suffix */
 	if (i == -1)
@@ -515,6 +540,15 @@ static int __devinit altera_uart_probe(struct platform_device *pdev)
 	else if (platp->irq)
 		port->irq = platp->irq;
 
+	/* Check platform data first so we can override device node data */
+	if (platp)
+		port->uartclk = platp->uartclk;
+	else {
+		ret = altera_uart_get_of_uartclk(pdev, port);
+		if (ret)
+			return ret;
+	}
+
 	port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE);
 	if (!port->membase)
 		return -ENOMEM;
@@ -527,7 +561,6 @@ static int __devinit altera_uart_probe(struct platform_device *pdev)
 	port->line = i;
 	port->type = PORT_ALTERA_UART;
 	port->iotype = SERIAL_IO_MEM;
-	port->uartclk = platp->uartclk;
 	port->ops = &altera_uart_ops;
 	port->flags = UPF_BOOT_AUTOCONF;
 
@@ -550,13 +583,23 @@ static int __devexit altera_uart_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static struct of_device_id altera_uart_match[] = {
+	{ .compatible = "ALTR,uart-1.0", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, altera_uart_match);
+#else
+#define altera_uart_match NULL
+#endif /* CONFIG_OF */
+
 static struct platform_driver altera_uart_platform_driver = {
 	.probe	= altera_uart_probe,
 	.remove	= __devexit_p(altera_uart_remove),
 	.driver	= {
-		.name	= DRV_NAME,
-		.owner	= THIS_MODULE,
-		.pm	= NULL,
+		.name		= DRV_NAME,
+		.owner		= THIS_MODULE,
+		.of_match_table	= altera_uart_match,
 	},
 };
 
-- 
1.7.0.4