[PATCH TIP 10/14] x86/ioapic: Add OF bindings for IO-APIC
Grant Likely
grant.likely at secretlab.ca
Thu Feb 17 09:04:28 EST 2011
On Mon, Jan 24, 2011 at 09:58:58AM +0530, Sebastian Andrzej Siewior wrote:
> ioapic_xlate provides a translation from the information in device tree
> to ioapic related informations. This includes
> - obtaining hw irq which is the vector number "=> pin number + gsi"
> - obtaining type (level/edge/..)
> - programming this information into ioapic
>
> ioapic_add_ofnode adds an irq_domain based on informations from the device
> tree. This information (irq_domain) is required in order to map a device to
> its proper interrupt controller.
>
> Cc: devicetree-discuss at lists.ozlabs.org
> Signed-off-by: Sebastian Andrzej Siewior <bigeasy at linutronix.de>
> Signed-off-by: Dirk Brandewie <dirk.brandewie at gmail.com>
Looks fine to me.
g.
> ---
> arch/x86/include/asm/io_apic.h | 7 +++
> arch/x86/include/asm/prom.h | 2 +
> arch/x86/kernel/apic/io_apic.c | 99 ++++++++++++++++++++++++++++++++++++++++
> arch/x86/kernel/irqinit.c | 6 ++
> arch/x86/kernel/prom.c | 15 ++++++
> 5 files changed, 129 insertions(+), 0 deletions(-)
>
> diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
> index f327d38..5a8b950 100644
> --- a/arch/x86/include/asm/io_apic.h
> +++ b/arch/x86/include/asm/io_apic.h
> @@ -177,6 +177,13 @@ struct mp_ioapic_gsi{
> u32 gsi_base;
> u32 gsi_end;
> };
> +#ifdef CONFIG_X86_OF
> +struct mp_of_ioapic {
> + struct device_node *node;
> +};
> +extern struct mp_of_ioapic mp_of_ioapic[MAX_IO_APICS];
> +void __init ioapic_add_ofnode(struct device_node *np);
> +#endif
> extern struct mp_ioapic_gsi mp_gsi_routing[];
> extern u32 gsi_top;
> int mp_find_ioapic(u32 gsi);
> diff --git a/arch/x86/include/asm/prom.h b/arch/x86/include/asm/prom.h
> index 3ed0bd6..eea2839 100644
> --- a/arch/x86/include/asm/prom.h
> +++ b/arch/x86/include/asm/prom.h
> @@ -26,6 +26,7 @@
> extern int of_ioapic;
> extern u64 initial_dtb;
> extern void add_dtb(u64 data);
> +extern void x86_add_irq_domains(void);
> void x86_dtb_find_config(void);
> void x86_dtb_get_config(unsigned int unused);
> void add_interrupt_host(struct irq_domain *ih);
> @@ -46,6 +47,7 @@ static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
>
> #else
> static inline void add_dtb(u64 data) { }
> +static inline void x86_add_irq_domains(void) { }
> static inline void x86_of_pci_init(void) { }
> #define x86_dtb_find_config x86_init_noop
> #define x86_dtb_get_config x86_init_uint_noop
> diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
> index 697dc34..be7417f 100644
> --- a/arch/x86/kernel/apic/io_apic.c
> +++ b/arch/x86/kernel/apic/io_apic.c
> @@ -43,6 +43,7 @@
> #include <linux/bootmem.h>
> #include <linux/dmar.h>
> #include <linux/hpet.h>
> +#include <linux/of_address.h>
>
> #include <asm/idle.h>
> #include <asm/io.h>
> @@ -60,6 +61,7 @@
> #include <asm/irq_remapping.h>
> #include <asm/hpet.h>
> #include <asm/hw_irq.h>
> +#include <asm/irq_controller.h>
>
> #include <asm/apic.h>
>
> @@ -88,6 +90,10 @@ int nr_ioapics;
> /* IO APIC gsi routing info */
> struct mp_ioapic_gsi mp_gsi_routing[MAX_IO_APICS];
>
> +#ifdef CONFIG_X86_OF
> +/* OF -> IO APIC lookup */
> +struct mp_of_ioapic mp_of_ioapic[MAX_IO_APICS];
> +#endif
> /* The one past the highest gsi number used */
> u32 gsi_top;
>
> @@ -4080,6 +4086,99 @@ void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
> nr_ioapics++;
> }
>
> +#ifdef CONFIG_X86_OF
> +static int ioapic_xlate(struct irq_domain *id, const u32 *intspec, u32 intsize,
> + u32 *out_hwirq, u32 *out_type)
> +{
> + u32 line;
> + u32 idx;
> + u32 type;
> + u32 trigger;
> + u32 polarity;
> + struct irq_cfg *cfg;
> + struct irq_desc *desc;
> +
> + if (intsize < 1)
> + return -EINVAL;
> +
> + line = *intspec;
> + idx = (u32) id->priv;
> + *out_hwirq = line + mp_gsi_routing[idx].gsi_base;
> + if (intsize > 1) {
> + intspec++;
> + type = *intspec;
> + switch (type) {
> + case 0:
> + *out_type = IRQ_TYPE_EDGE_RISING;
> + trigger = IOAPIC_EDGE;
> + polarity = 1;
> + break;
> + case 1:
> + *out_type = IRQ_TYPE_LEVEL_LOW;
> + trigger = IOAPIC_LEVEL;
> + polarity = 0;
> + break;
> + case 2:
> + *out_type = IRQ_TYPE_LEVEL_HIGH;
> + trigger = IOAPIC_LEVEL;
> + polarity = 1;
> + break;
> + case 3:
> + *out_type = IRQ_TYPE_EDGE_FALLING;
> + trigger = IOAPIC_EDGE;
> + polarity = 0;
> + break;
> + default:
> + *out_type = IRQ_TYPE_NONE;
> + trigger = IOAPIC_AUTO;
> + polarity = 0;
> + break;
> + };
> + } else {
> + *out_type = IRQ_TYPE_NONE;
> + trigger = IOAPIC_AUTO;
> + polarity = 0;
> + }
> + /* And now tell the IO APIC to make the line ready */
> + desc = irq_to_desc_alloc_node(*out_hwirq, 0);
> + cfg = irq_cfg(*out_hwirq);
> + add_pin_to_irq_node(cfg, 0, idx, line);
> + /* make it edge by default, settype will update it */
> + setup_ioapic_irq(idx, line, *out_hwirq, cfg, trigger, polarity);
> + return 0;
> +}
> +
> +void __init ioapic_add_ofnode(struct device_node *np)
> +{
> + int i;
> + int ret;
> + struct resource r;
> +
> + ret = of_address_to_resource(np, 0, &r);
> + if (ret) {
> + printk(KERN_ERR "Failed to obtain address for %s\n",
> + np->full_name);
> + return;
> + }
> +
> + for (i = 0; i < nr_ioapics; i++) {
> + if (r.start == mp_ioapics[i].apicaddr) {
> + struct irq_domain *id;
> +
> + mp_of_ioapic[i].node = np;
> + id = kzalloc(sizeof(*id), GFP_KERNEL);
> + BUG_ON(!id);
> + id->controller = np;
> + id->xlate = ioapic_xlate;
> + id->priv = (void *)i;
> + add_interrupt_host(id);
> + return;
> + }
> + }
> + printk(KERN_ERR "IOxAPIC at %s is not registered.\n", np->full_name);
> +}
> +#endif
> +
> /* Enable IOAPIC early just for system timer */
> void __init pre_init_apic_IRQ0(void)
> {
> diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
> index 4cadf86..9f76f89 100644
> --- a/arch/x86/kernel/irqinit.c
> +++ b/arch/x86/kernel/irqinit.c
> @@ -119,6 +119,12 @@ void __init init_IRQ(void)
> int i;
>
> /*
> + * We probably need a better place for this, but it works for
> + * now ...
> + */
> + x86_add_irq_domains();
> +
> + /*
> * On cpu 0, Assign IRQ0_VECTOR..IRQ15_VECTOR's to IRQ 0..15.
> * If these IRQ's are handled by legacy interrupt-controllers like PIC,
> * then this configuration will likely be static after the boot. If
> diff --git a/arch/x86/kernel/prom.c b/arch/x86/kernel/prom.c
> index 8215e8a..83ab00a 100644
> --- a/arch/x86/kernel/prom.c
> +++ b/arch/x86/kernel/prom.c
> @@ -11,9 +11,11 @@
> #include <linux/slab.h>
> #include <linux/pci.h>
> #include <linux/of_pci.h>
> +#include <linux/of_fdt.h>
>
> #include <asm/hpet.h>
> #include <asm/irq_controller.h>
> +#include <asm/apic.h>
> #include <asm/io_apic.h>
> #include <asm/pci_x86.h>
>
> @@ -320,3 +322,16 @@ void __init x86_dtb_get_config(unsigned int unused)
> dtb_setup_hpet();
> dtb_apic_setup();
> }
> +
> +void __init x86_add_irq_domains(void)
> +{
> + struct device_node *dp;
> +
> + if (!initial_boot_params)
> + return;
> +
> + for_each_node_with_property(dp, "interrupt-controller") {
> + if (of_device_is_compatible(dp, "intel,ioapic"))
> + ioapic_add_ofnode(dp);
> + }
> +}
> --
> 1.7.3.2
>
> _______________________________________________
> devicetree-discuss mailing list
> devicetree-discuss at lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/devicetree-discuss
More information about the devicetree-discuss
mailing list