[PATCH v3] gpio: add new Altera PIO driver
Thomas Chou
thomas at wytron.com.tw
Tue Feb 8 16:16:24 EST 2011
This driver supports the Altera PIO core.
Signed-off-by: Thomas Chou <thomas at wytron.com.tw>
---
v2 change compatible vendor to uppercase, ALTR.
add dts binding doc.
v3 remove subsys_initcall.
add to_altera_gpio() macro.
.../devicetree/bindings/gpio/altera_gpio.txt | 7 +
drivers/gpio/Kconfig | 6 +
drivers/gpio/Makefile | 1 +
drivers/gpio/altera_gpio.c | 231 ++++++++++++++++++++
4 files changed, 245 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/gpio/altera_gpio.txt
create mode 100644 drivers/gpio/altera_gpio.c
diff --git a/Documentation/devicetree/bindings/gpio/altera_gpio.txt b/Documentation/devicetree/bindings/gpio/altera_gpio.txt
new file mode 100644
index 0000000..5ab751a
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/altera_gpio.txt
@@ -0,0 +1,7 @@
+Altera GPIO
+
+Required properties:
+- compatible : should be "ALTR,pio-1.0".
+Optional properties:
+- resetvalue : the reset value of the output port.
+- width : the width of the port in number of bits.
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 664660e..40271f0 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -70,6 +70,12 @@ config GPIO_MAX730X
comment "Memory mapped GPIO expanders:"
+config GPIO_ALTERA
+ bool "Altera GPIO"
+ depends on OF
+ help
+ Say yes here to support the Altera PIO device
+
config GPIO_BASIC_MMIO
tristate "Basic memory-mapped GPIO controllers support"
help
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 3351cf8..3b7b737 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_GPIOLIB) += gpiolib.o
obj-$(CONFIG_GPIO_ADP5520) += adp5520-gpio.o
obj-$(CONFIG_GPIO_ADP5588) += adp5588-gpio.o
+obj-$(CONFIG_GPIO_ALTERA) += altera_gpio.o
obj-$(CONFIG_GPIO_BASIC_MMIO) += basic_mmio_gpio.o
obj-$(CONFIG_GPIO_LANGWELL) += langwell_gpio.o
obj-$(CONFIG_GPIO_MAX730X) += max730x.o
diff --git a/drivers/gpio/altera_gpio.c b/drivers/gpio/altera_gpio.c
new file mode 100644
index 0000000..ab09f81
--- /dev/null
+++ b/drivers/gpio/altera_gpio.c
@@ -0,0 +1,231 @@
+/*
+ * Altera GPIO driver
+ *
+ * Copyright (C) 2011 Thomas Chou <thomas at wytron.com.tw>
+ *
+ * Based on Xilinx gpio driver, which is
+ * Copyright 2008 Xilinx, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+
+#define DRV_NAME "altera_gpio"
+
+/* Register Offset Definitions */
+#define ALTERA_GPIO_DATA_OFFSET 0x0 /* Data register */
+#define ALTERA_GPIO_DIR_OFFSET 0x4 /* I/O direction register */
+
+struct altera_gpio_instance {
+ struct of_mm_gpio_chip mmchip;
+ u32 gpio_state; /* GPIO state shadow register */
+ u32 gpio_dir; /* GPIO direction shadow register */
+ spinlock_t gpio_lock; /* Lock used for synchronization */
+};
+
+static inline struct altera_gpio_instance *to_altera_gpio(
+ struct of_mm_gpio_chip *mm_gc)
+{
+ return container_of(mm_gc, struct altera_gpio_instance, mmchip);
+}
+
+/*
+ * altera_gpio_get - Read the specified signal of the GPIO device.
+ * @gc: Pointer to gpio_chip device structure.
+ * @gpio: GPIO signal number.
+ *
+ * This function reads the specified signal of the GPIO device. It returns 0 if
+ * the signal clear, 1 if signal is set or negative value on error.
+ */
+static int altera_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+
+ return (readl(mm_gc->regs + ALTERA_GPIO_DATA_OFFSET) >> gpio) & 1;
+}
+
+/*
+ * altera_gpio_set - Write the specified signal of the GPIO device.
+ * @gc: Pointer to gpio_chip device structure.
+ * @gpio: GPIO signal number.
+ * @val: Value to be written to specified signal.
+ *
+ * This function writes the specified value in to the specified signal of the
+ * GPIO device.
+ */
+static void altera_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ unsigned long flags;
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct altera_gpio_instance *chip = to_altera_gpio(mm_gc);
+
+ spin_lock_irqsave(&chip->gpio_lock, flags);
+
+ /* Write to shadow register and output */
+ if (val)
+ chip->gpio_state |= 1 << gpio;
+ else
+ chip->gpio_state &= ~(1 << gpio);
+ writel(chip->gpio_state, mm_gc->regs + ALTERA_GPIO_DATA_OFFSET);
+
+ spin_unlock_irqrestore(&chip->gpio_lock, flags);
+}
+
+/*
+ * altera_gpio_dir_in - Set the direction of the specified GPIO signal as input.
+ * @gc: Pointer to gpio_chip device structure.
+ * @gpio: GPIO signal number.
+ *
+ * This function sets the direction of specified GPIO signal as input.
+ * It returns 0 if direction of GPIO signals is set as input otherwise it
+ * returns negative error value.
+ */
+static int altera_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+ unsigned long flags;
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct altera_gpio_instance *chip = to_altera_gpio(mm_gc);
+
+ spin_lock_irqsave(&chip->gpio_lock, flags);
+
+ /* Clear the GPIO bit in shadow register and set direction as input */
+ chip->gpio_dir &= ~(1 << gpio);
+ writel(chip->gpio_dir, mm_gc->regs + ALTERA_GPIO_DIR_OFFSET);
+
+ spin_unlock_irqrestore(&chip->gpio_lock, flags);
+
+ return 0;
+}
+
+/*
+ * altera_gpio_dir_out - Set the direction of the specified GPIO as output.
+ * @gc: Pointer to gpio_chip device structure.
+ * @gpio: GPIO signal number.
+ * @val: Value to be written to specified signal.
+ *
+ * This function sets the direction of specified GPIO signal as output. If all
+ * GPIO signals of GPIO chip is configured as input then it returns
+ * error otherwise it returns 0.
+ */
+static int altera_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ unsigned long flags;
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct altera_gpio_instance *chip = to_altera_gpio(mm_gc);
+
+ spin_lock_irqsave(&chip->gpio_lock, flags);
+
+ /* Write state of GPIO signal */
+ if (val)
+ chip->gpio_state |= 1 << gpio;
+ else
+ chip->gpio_state &= ~(1 << gpio);
+ writel(chip->gpio_state, mm_gc->regs + ALTERA_GPIO_DATA_OFFSET);
+
+ /* Set the GPIO bit in shadow register and set direction as output */
+ chip->gpio_dir |= (1 << gpio);
+ writel(chip->gpio_dir, mm_gc->regs + ALTERA_GPIO_DIR_OFFSET);
+
+ spin_unlock_irqrestore(&chip->gpio_lock, flags);
+
+ return 0;
+}
+
+/*
+ * altera_gpio_save_regs - Set initial values of GPIO pins
+ * @mm_gc: pointer to memory mapped GPIO chip structure
+ */
+static void altera_gpio_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+ struct altera_gpio_instance *chip = to_altera_gpio(mm_gc);
+
+ writel(chip->gpio_state, mm_gc->regs + ALTERA_GPIO_DATA_OFFSET);
+ writel(chip->gpio_dir, mm_gc->regs + ALTERA_GPIO_DIR_OFFSET);
+}
+
+/*
+ * altera_gpio_of_probe - Probe method for the GPIO device.
+ * @np: pointer to device tree node
+ *
+ * This function probes the GPIO device in the device tree. It initializes the
+ * driver data structure. It returns 0, if the driver is bound to the GPIO
+ * device, or a negative value if there is an error.
+ */
+static int __devinit altera_gpio_of_probe(struct device_node *np)
+{
+ struct altera_gpio_instance *chip;
+ int status = 0;
+ int len;
+ const __be32 *tree_info;
+
+ chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ /* Update GPIO state shadow register with default value */
+ tree_info = of_get_property(np, "resetvalue", &len);
+ if (tree_info && len >= sizeof(__be32))
+ chip->gpio_state = be32_to_cpup(tree_info);
+
+ /* Update GPIO direction shadow register with default value */
+ chip->gpio_dir = 0; /* By default, all pins are inputs */
+
+ /* Check device node for device width */
+ chip->mmchip.gc.ngpio = 32; /* By default assume full GPIO controller */
+ tree_info = of_get_property(np, "width", &len);
+ if (tree_info && len >= sizeof(__be32))
+ chip->mmchip.gc.ngpio = be32_to_cpup(tree_info);
+
+ spin_lock_init(&chip->gpio_lock);
+
+ chip->mmchip.gc.direction_input = altera_gpio_dir_in;
+ chip->mmchip.gc.direction_output = altera_gpio_dir_out;
+ chip->mmchip.gc.get = altera_gpio_get;
+ chip->mmchip.gc.set = altera_gpio_set;
+
+ chip->mmchip.save_regs = altera_gpio_save_regs;
+
+ /* Call the OF gpio helper to setup and register the GPIO device */
+ status = of_mm_gpiochip_add(np, &chip->mmchip);
+ if (status) {
+ kfree(chip);
+ pr_err("%s: error in probe function with status %d\n",
+ np->full_name, status);
+ return status;
+ }
+ pr_info(DRV_NAME ": %s: registered\n", np->full_name);
+ return 0;
+}
+
+static struct of_device_id altera_gpio_of_match[] __devinitdata = {
+ { .compatible = "ALTR,pio-1.0", },
+ {},
+};
+
+/* Make sure we get initialized before anyone else tries to use us */
+void __init altera_gpio_init(void)
+{
+ struct device_node *np;
+
+ for_each_matching_node(np, altera_gpio_of_match)
+ altera_gpio_of_probe(np);
+}
+
+MODULE_DESCRIPTION("Altera GPIO driver");
+MODULE_AUTHOR("Thomas Chou <thomas at wytron.com.tw>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
--
1.7.4
More information about the devicetree-discuss
mailing list