[PATCH 3/3] arm/dt: Tegra: Add support-bit to SDHCI nodes

Stephen Warren swarren at nvidia.com
Wed Aug 31 05:17:17 EST 2011


For Seaboard's internal eMMC, this makes the difference between a
5.5MB/s and 10.2MB/s transfer rate. On Harmony, there wasn't any
measurable difference on my cheap/slow ~2MB/s card.

Signed-off-by: Stephen Warren <swarren at nvidia.com>
---
This depends on patch 1 in this series. I assume Grant or Arnd will apply
them both to whatever branch usually takes .dts updates.

 arch/arm/boot/dts/tegra-harmony.dts  |    1 +
 arch/arm/boot/dts/tegra-seaboard.dts |    4 ++++
 2 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts
index e581866..0e225b8 100644
--- a/arch/arm/boot/dts/tegra-harmony.dts
+++ b/arch/arm/boot/dts/tegra-harmony.dts
@@ -66,5 +66,6 @@
 		cd-gpios = <&gpio 58 0>; /* gpio PH2 */
 		wp-gpios = <&gpio 59 0>; /* gpio PH3 */
 		power-gpios = <&gpio 70 0>; /* gpio PI6 */
+		support-8bit;
 	};
 };
diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts
index 64cedca..a72299b 100644
--- a/arch/arm/boot/dts/tegra-seaboard.dts
+++ b/arch/arm/boot/dts/tegra-seaboard.dts
@@ -25,4 +25,8 @@
 		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
 		power-gpios = <&gpio 70 0>; /* gpio PI6 */
 	};
+
+	sdhci at c8000600 {
+		support-8bit;
+	};
 };
-- 
1.7.0.4



More information about the devicetree-discuss mailing list