[PATCHv4] mtd: gpio-nand: add device tree bindings
Jamie Iles
jamie at jamieiles.com
Tue Aug 16 01:24:47 EST 2011
On Mon, Aug 15, 2011 at 05:45:31PM +0300, Artem Bityutskiy wrote:
> On Mon, 2011-08-15 at 15:38 +0100, Jamie Iles wrote:
> > On Mon, Aug 15, 2011 at 05:28:57PM +0300, Artem Bityutskiy wrote:
> > > On Tue, 2011-08-09 at 16:12 +0100, Jamie Iles wrote:
> > > > - res1 = platform_get_resource(dev, IORESOURCE_MEM, 1);
> > > > + if (!dev->dev.of_node)
> > > > + res1 = platform_get_resource(dev, IORESOURCE_MEM, 1);
> > > > + else
> > > > + res1 = gpio_nand_of_get_io_sync(&dev->dev);
> > > > +
> > > > if (res1) {
> > > > gpiomtd->io_sync = request_and_remap(res1, 4, "NAND sync", &ret);
> > > > if (!gpiomtd->io_sync) {
> > > > @@ -257,7 +362,16 @@ static int __devinit gpio_nand_probe(struct platform_device *dev)
> > > > }
> > > > }
> > > >
> > > > - memcpy(&gpiomtd->plat, dev->dev.platform_data, sizeof(gpiomtd->plat));
> > > > + if (dev->dev.of_node)
> > > > + kfree(res1);
> > > > +
> > > > + if (dev->dev.platform_data)
> > > > + memcpy(&gpiomtd->plat, dev->dev.platform_data,
> > > > + sizeof(gpiomtd->plat));
> > > > + else
> > > > + ret = gpio_nand_of_get_config(&dev->dev, &gpiomtd->plat);
> > > > + if (ret)
> > > > + goto err_nce;
> > > >
> > >
> > > So with this code you can mix platform data and DT? Say, io_sync may
> > > come from platform data and the rest from the DT? Is this normal
> > > practice?
> >
> > Well you can use platform_data with DT - it's the only way to pass
> > function pointers for example, but I'm not convinced it's required in
> > this case (there is the adjust_parts callback, but I can't see a user of
> > it) so I'd be inclined to change the conditionals to:
> >
> > if (!dev->dev.of_node)
> > memcpy(&gpiomtd->plat, dev->dev.platform_data, ...);
> > else
> > gpio_nand_of_get_config(...);
> >
> > so that we don't use platform_data for the DT case.
>
> Yeah, would be nice to have only one "read platform data" and only one
> "read DT information" call - this is just cleaner design.
OK, how about this? I think it looks a lot neater.
Jamie
8<--
From: Jamie Iles <jamie at jamieiles.com>
Subject: [PATCH] mtd: gpio-nand: add device tree bindings
Add device tree bindings so that the gpio-nand driver may be
instantiated from the device tree. This also allows the partitions
to be specified in the device tree.
v5: - fold dt config helpers into a single gpio_nand_of_get_config()
v4: - get io sync address from gpio-control-nand,io-sync-reg
property rather than a resource
- clarified a few details in the binding
v3: - remove redundant cast and a couple of whitespace/naming
changes
v2: - add CONFIG_OF guards for non-dt platforms
- compatible becomes gpio-control-nand
- clarify some binding details
Cc: David Woodhouse <dwmw2 at infradead.org>
Cc: Artem Bityutskiy <dedekind1 at gmail.com>
Cc: Scott Wood <scottwood at freescale.com>
Cc: Grant Likely <grant.likely at secretlab.ca>
Signed-off-by: Jamie Iles <jamie at jamieiles.com>
---
.../devicetree/bindings/mtd/gpio-control-nand.txt | 44 +++++++++
drivers/mtd/nand/gpio.c | 93 ++++++++++++++++++--
2 files changed, 131 insertions(+), 6 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mtd/gpio-control-nand.txt
diff --git a/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt b/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt
new file mode 100644
index 0000000..719f4dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt
@@ -0,0 +1,44 @@
+GPIO assisted NAND flash
+
+The GPIO assisted NAND flash uses a memory mapped interface to
+read/write the NAND commands and data and GPIO pins for the control
+signals.
+
+Required properties:
+- compatible : "gpio-control-nand"
+- reg : should specify localbus chip select and size used for the chip. The
+ resource describes the data bus connected to the NAND flash and all accesses
+ are made in native endianness.
+- #address-cells, #size-cells : Must be present if the device has sub-nodes
+ representing partitions.
+- gpios : specifies the gpio pins to control the NAND device. nwp is an
+ optional gpio and may be set to 0 if not present.
+
+Optional properties:
+- bank-width : Width (in bytes) of the device. If not present, the width
+ defaults to 1 byte.
+- chip-delay : chip dependent delay for transferring data from array to
+ read registers (tR). If not present then a default of 20us is used.
+- gpio-control-nand,io-sync-reg : A 64-bit physical address for a read
+ location used to guard against bus reordering with regards to accesses to
+ the GPIO's and the NAND flash data bus. If present, then after changing
+ GPIO state and before and after command byte writes, this register will be
+ read to ensure that the GPIO accesses have completed.
+
+Examples:
+
+gpio-nand at 1,0 {
+ compatible = "gpio-control-nand";
+ reg = <1 0x0000 0x2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ gpios = <&banka 1 0 /* rdy */
+ &banka 2 0 /* nce */
+ &banka 3 0 /* ale */
+ &banka 4 0 /* cle */
+ 0 /* nwp */>;
+
+ partition at 0 {
+ ...
+ };
+};
diff --git a/drivers/mtd/nand/gpio.c b/drivers/mtd/nand/gpio.c
index 2c2060b..961f4eb 100644
--- a/drivers/mtd/nand/gpio.c
+++ b/drivers/mtd/nand/gpio.c
@@ -27,6 +27,9 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand-gpio.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_gpio.h>
struct gpiomtd {
void __iomem *io_sync;
@@ -171,6 +174,74 @@ static int gpio_nand_devready(struct mtd_info *mtd)
return gpio_get_value(gpiomtd->plat.gpio_rdy);
}
+#ifdef CONFIG_OF
+static const struct of_device_id gpio_nand_id_table[] = {
+ { .compatible = "gpio-control-nand" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, gpio_nand_id_table);
+
+static int gpio_nand_get_config(const struct device *dev,
+ struct gpio_nand_platdata *plat)
+{
+ u32 val;
+
+ if (!of_property_read_u32(dev->of_node, "bank-width", &val)) {
+ if (val == 2) {
+ plat->options |= NAND_BUSWIDTH_16;
+ } else if (val != 1) {
+ dev_err(dev, "invalid bank-width %u\n", val);
+ return -EINVAL;
+ }
+ }
+
+ plat->gpio_rdy = of_get_gpio(dev->of_node, 0);
+ plat->gpio_nce = of_get_gpio(dev->of_node, 1);
+ plat->gpio_ale = of_get_gpio(dev->of_node, 2);
+ plat->gpio_cle = of_get_gpio(dev->of_node, 3);
+ plat->gpio_nwp = of_get_gpio(dev->of_node, 4);
+
+ if (!of_property_read_u32(dev->of_node, "chip-delay", &val))
+ plat->chip_delay = val;
+
+ return 0;
+}
+
+static struct resource *gpio_nand_get_io_sync(struct platform_device *pdev)
+{
+ struct resource *r = devm_kzalloc(&pdev->dev, sizeof(*r), GFP_KERNEL);
+ u64 addr;
+
+ if (!r || of_property_read_u64(pdev->dev.of_node,
+ "gpio-control-nand,io-sync-reg", &addr))
+ return NULL;
+
+ r->start = addr;
+ r->end = r->start + 0x3;
+ r->flags = IORESOURCE_MEM;
+
+ return r;
+}
+#else /* CONFIG_OF */
+
+#define gpio_nand_id_table NULL
+
+static inline int gpio_nand_get_config(const struct device *dev,
+ struct gpio_nand_platdata *plat)
+{
+ if (dev->platform_data)
+ memcpy(plat, dev->platform_data, sizeof(*plat));
+
+ return 0;
+}
+
+static inline struct resource *
+gpio_nand_get_io_sync(struct platform_device *pdev)
+{
+ return platform_get_resource(pdev, IORESOURCE_MEM, 1);
+}
+#endif /* CONFIG_OF */
+
static int __devexit gpio_nand_remove(struct platform_device *dev)
{
struct gpiomtd *gpiomtd = platform_get_drvdata(dev);
@@ -178,7 +249,7 @@ static int __devexit gpio_nand_remove(struct platform_device *dev)
nand_release(&gpiomtd->mtd_info);
- res = platform_get_resource(dev, IORESOURCE_MEM, 1);
+ res = gpio_nand_get_io_sync(dev);
iounmap(gpiomtd->io_sync);
if (res)
release_mem_region(res->start, resource_size(res));
@@ -226,9 +297,9 @@ static int __devinit gpio_nand_probe(struct platform_device *dev)
struct gpiomtd *gpiomtd;
struct nand_chip *this;
struct resource *res0, *res1;
- int ret;
+ int ret = 0;
- if (!dev->dev.platform_data)
+ if (!dev->dev.of_node && !dev->dev.platform_data)
return -EINVAL;
res0 = platform_get_resource(dev, IORESOURCE_MEM, 0);
@@ -248,7 +319,7 @@ static int __devinit gpio_nand_probe(struct platform_device *dev)
goto err_map;
}
- res1 = platform_get_resource(dev, IORESOURCE_MEM, 1);
+ res1 = gpio_nand_get_io_sync(dev);
if (res1) {
gpiomtd->io_sync = request_and_remap(res1, 4, "NAND sync", &ret);
if (!gpiomtd->io_sync) {
@@ -257,7 +328,9 @@ static int __devinit gpio_nand_probe(struct platform_device *dev)
}
}
- memcpy(&gpiomtd->plat, dev->dev.platform_data, sizeof(gpiomtd->plat));
+ ret = gpio_nand_get_config(&dev->dev, &gpiomtd->plat);
+ if (ret)
+ goto err_nce;
ret = gpio_request(gpiomtd->plat.gpio_nce, "NAND NCE");
if (ret)
@@ -312,10 +385,17 @@ static int __devinit gpio_nand_probe(struct platform_device *dev)
goto err_wp;
}
- if (gpiomtd->plat.adjust_parts)
+ if (gpiomtd->plat.adjust_parts) {
gpiomtd->plat.adjust_parts(&gpiomtd->plat,
gpiomtd->mtd_info.size);
+ } else {
+ ret = of_mtd_parse_partitions(&dev->dev, dev->dev.of_node,
+ &gpiomtd->plat.parts);
+ if (ret < 0)
+ goto err_wp;
+ gpiomtd->plat.num_parts = ret;
+ }
mtd_device_register(&gpiomtd->mtd_info, gpiomtd->plat.parts,
gpiomtd->plat.num_parts);
platform_set_drvdata(dev, gpiomtd);
@@ -352,6 +432,7 @@ static struct platform_driver gpio_nand_driver = {
.remove = gpio_nand_remove,
.driver = {
.name = "gpio-nand",
+ .of_match_table = gpio_nand_id_table,
},
};
--
1.7.4.1
More information about the devicetree-discuss
mailing list