[RFC 5/5] [powerpc] Implement a p1010rdb clock source.

[Robin Holt]

On Tue, Aug 09, 2011 at 01:44:16PM +0000, U Bhaskar-B22300 wrote:
> 
> 
> > -----Original Message-----
> > From: Robin Holt [mailto:holt at sgi.com]
> > Sent: Tuesday, August 09, 2011 7:06 PM
> > To: Wolfgang Grandegger
> > Cc: Robin Holt; U Bhaskar-B22300; socketcan-core at lists.berlios.de;
> > netdev at vger.kernel.org; Devicetree-discuss at lists.ozlabs.org; Marc Kleine-
> > Budde
> > Subject: Re: [RFC 5/5] [powerpc] Implement a p1010rdb clock source.
> > 
> > On Tue, Aug 09, 2011 at 03:03:50PM +0200, Wolfgang Grandegger wrote:
> > > On 08/09/2011 02:49 PM, Robin Holt wrote:
...
> > > > How would you like to change that?  Should I add it as part of this
> > > > patch, add another patch to the series, or let you take care of it?
> > > >
> > > > Also, I assume the uboot project will need to be changed as well to
> > > > reflect the corrected name.
> > >
> > > I think you should provide patches within this series to cleanup the
> > > obsolete stuff, dts and binding doc.
> > 
> > It reads to me that the binding doc now reduces just the required
> > properties.  Should I remove the file entirely?
> [Bhaskar] I think the binding doc should atleast be present with the required properties to give the clarity
>  	    about the CAN functionality
> 		can0 at 1c000 {
>                  compatible = "fsl,flexcan";
>                  reg = <0x1c000 0x1000>;
>                  interrupts = <48 0x2>;
>                  interrupt-parent = <&mpic>;
>                  clock-frequency = <fixed by u-boot>;
>          	}; 

I am not sure what clarity we get for it.  Here it is as a work in progress:


CAN Device Tree Bindings
------------------------
2011 Freescale Semiconductor, Inc.

fsl,flexcan nodes
-----------------------
Only the required compatible-, reg- and interrupt-properties are supported.

Examples:
	can0 at 1c000 {
		compatible = "fsl,flexcan";
		reg = <0x1c000 0x1000>;
		interrupts = <48 0x2>;
		interrupt-parent = <&mpic>;
	};