[RFC/PATCH 14/14] dt: omap3: enable dt support for i2c1 controller
G, Manjunath Kondaiah
manjugk at ti.com
Wed Aug 10 00:10:32 EST 2011
Adapt dt for omap i2c1 controller and remove legacy i2c
initilization in omap3 generic board file.
Tested on omap3 beagle board for dt and non-dt builds.
Signed-off-by: G, Manjunath Kondaiah <manjugk at ti.com>
---
arch/arm/boot/dts/omap3-soc.dtsi | 6 ++--
arch/arm/mach-omap2/board-omap3-dt.c | 14 +++++-----
drivers/i2c/busses/i2c-omap.c | 23 ++++++++++++++++--
drivers/of/platform.c | 41 +++++++++++++++++++++++++++++++++-
4 files changed, 70 insertions(+), 14 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-soc.dtsi b/arch/arm/boot/dts/omap3-soc.dtsi
index 85de92f..bcff63b 100644
--- a/arch/arm/boot/dts/omap3-soc.dtsi
+++ b/arch/arm/boot/dts/omap3-soc.dtsi
@@ -31,7 +31,7 @@
i2c1: i2c at 70000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "ti,omap3-i2c";
+ compatible = "ti,omap3-i2c", "ti,omap3-device";
reg = <0x70000 0x100>;
interrupts = < 88 >;
};
@@ -39,7 +39,7 @@
i2c2: i2c at 72000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "ti,omap3-i2c";
+ compatible = "ti,omap3-i2c", "ti,omap3-device";
reg = <0x72000 0x100>;
interrupts = < 89 >;
};
@@ -47,7 +47,7 @@
i2c3: i2c at 60000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "ti,omap3-i2c";
+ compatible = "ti,omap3-i2c", "ti,omap3-device";
reg = <0x60000 0x100>;
interrupts = < 93 >;
};
diff --git a/arch/arm/mach-omap2/board-omap3-dt.c b/arch/arm/mach-omap2/board-omap3-dt.c
index 4b76e19..16cf283 100644
--- a/arch/arm/mach-omap2/board-omap3-dt.c
+++ b/arch/arm/mach-omap2/board-omap3-dt.c
@@ -36,11 +36,11 @@ static struct twl4030_platform_data beagle_twldata = {
/* platform_data for children goes here */
};
-static int __init omap3_beagle_i2c_init(void)
-{
- omap3_pmic_init("twl4030", &beagle_twldata);
- return 0;
-}
+struct of_dev_auxdata omap3_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA_ID_PDSIZE("ti,omap3-i2c", 0x48070000, "i2c1", 1,\
+ &beagle_twldata, sizeof(beagle_twldata)),
+ {}
+};
static void __init omap3_init_early(void)
{
@@ -70,11 +70,11 @@ static struct of_device_id omap_dt_match_table[] __initdata = {
static void __init omap3_init(void)
{
- omap3_beagle_i2c_init();
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_serial_init();
- of_platform_populate(NULL, omap_dt_match_table, NULL, NULL);
+ of_platform_populate(NULL, omap_dt_match_table, omap3_auxdata_lookup,
+ NULL);
}
static const char *omap3_dt_match[] __initdata = {
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index ae1545b..5167737 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -38,6 +38,7 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/of_i2c.h>
+#include <linux/of_device.h>
#include <linux/slab.h>
#include <linux/i2c-omap.h>
#include <linux/pm_runtime.h>
@@ -972,6 +973,16 @@ static const struct i2c_algorithm omap_i2c_algo = {
.functionality = omap_i2c_func,
};
+#if defined(CONFIG_OF)
+static const struct of_device_id omap_i2c_of_match[] = {
+ {.compatible = "ti,omap3-i2c", },
+ {},
+}
+MODULE_DEVICE_TABLE(of, omap_i2c_of_match);
+#else
+#define omap_i2c_of_match NULL
+#endif
+
static int __devinit
omap_i2c_probe(struct platform_device *pdev)
{
@@ -1008,12 +1019,17 @@ omap_i2c_probe(struct platform_device *pdev)
goto err_release_region;
}
+ speed = 100; /* Default speed */
if (pdata != NULL) {
speed = pdata->clkrate;
dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat;
- } else {
- speed = 100; /* Default speed */
- dev->set_mpu_wkup_lat = NULL;
+#if defined(CONFIG_OF)
+ } else if (pdev->dev.of_node) {
+ u32 prop;
+ if (!of_property_read_u32(pdev->dev.of_node, "clock-frequency",
+ &prop))
+ speed = prop/100;
+#endif
}
dev->speed = speed;
@@ -1178,6 +1194,7 @@ static struct platform_driver omap_i2c_driver = {
.name = "omap_i2c",
.owner = THIS_MODULE,
.pm = OMAP_I2C_PM_OPS,
+ .of_match_table = omap_i2c_of_match,
},
};
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index 4b27286..4d8a2fa 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -24,6 +24,10 @@
#include <linux/of_platform.h>
#include <linux/platform_device.h>
+#ifdef CONFIG_ARCH_OMAP2PLUS
+#include <plat/omap_device.h>
+#endif
+
const struct of_device_id of_default_bus_match_table[] = {
{ .compatible = "simple-bus", },
#ifdef CONFIG_ARM_AMBA
@@ -544,6 +548,36 @@ static const struct of_dev_auxdata *of_dev_lookup(const struct of_dev_auxdata *l
return NULL;
}
+static struct omap_device_pm_latency omap_device_latency[] = {
+ [0] = {
+ .deactivate_func = omap_device_idle_hwmods,
+ .activate_func = omap_device_enable_hwmods,
+ .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+ },
+};
+
+int of_omap_device_create(struct device_node *np, const char *name, int id,
+ void *platform_data,
+ int pd_size)
+{
+ struct omap_hwmod *oh;
+ struct platform_device *pdev;
+
+ oh = omap_hwmod_lookup(name);
+ if (!oh) {
+ pr_err("Could not look up %s\n", name);
+ return -EEXIST;
+ }
+
+ pdev = omap_device_build_dt(np, name, id, oh, platform_data,
+ sizeof(platform_data), omap_device_latency,
+ ARRAY_SIZE(omap_device_latency), 0);
+ WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name);
+
+ pr_info("DT: omap_device build for %s is successful\n", name);
+ return PTR_ERR(pdev);
+}
+
/**
* of_platform_bus_create() - Create a device for a node and its children.
* @bus: device node of the bus to instantiate
@@ -565,7 +599,7 @@ static int of_platform_bus_create(struct device_node *bus,
struct platform_device *dev;
const char *bus_id = NULL;
void *platform_data = NULL;
- int pd_size;
+ int pd_size = 0;
int id = -1;
int rc = 0;
@@ -597,6 +631,11 @@ static int of_platform_bus_create(struct device_node *bus,
return 0;
}
+ if (of_device_is_compatible(bus, "ti,omap3-device")) {
+ of_omap_device_create(bus, bus_id, id, platform_data, pd_size);
+ return 0;
+ }
+
dev = of_platform_device_create_pdata(bus, bus_id, platform_data, parent);
/* override the id if auxdata gives an id */
--
1.7.1
More information about the devicetree-discuss
mailing list