[PATCH] USB: isp1362: Add devicetree support
Tobias Klauser
tklauser at distanz.ch
Tue Aug 2 23:49:21 EST 2011
Signed-off-by: Tobias Klauser <tklauser at distanz.ch>
---
.../devicetree/bindings/usb/isp1362-hcd.txt | 23 +++++
drivers/usb/host/isp1362-hcd.c | 93 +++++++++++++++++++-
2 files changed, 113 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/isp1362-hcd.txt
diff --git a/Documentation/devicetree/bindings/usb/isp1362-hcd.txt b/Documentation/devicetree/bindings/usb/isp1362-hcd.txt
new file mode 100644
index 0000000..9641a82
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/isp1362-hcd.txt
@@ -0,0 +1,23 @@
+NXP ISP1362 USB host controller
+
+Required properties :
+ - compatible : should be "nxp,usb-isp1362"
+ - reg : offset and length of the register set for the device
+ - interrupts : interrupt number
+
+Optional properties :
+ - nxp,sel15Kres: boolean; Enable internal pulldown resistors on downstream
+ ports.
+ - nxp,clknotstop: boolean; Clock cannot be stopped
+ - nxp,oc_enable: boolean; Enable on-chip overcurrent protection
+ - nxp,int_act_high: boolean; INT output polarity high
+ - nxp,int_edge_triggered: boolean; INT edge triggered
+ - nxp,dreq_act_high: boolean; DREQ output polarity high
+ - nxp,dack_act_high: boolean; DACK input polarity high
+ - nxp,remote_wakeup_connected: boolean; chip can be resumed via H_WAKEUP pin
+ - nxp,no_power_switching: boolean; Switch or not to switch (keep always
+ powered)
+ - nxp,power_switching_mode: boolean; Ganged port power switching (0) or
+ individual port power switching (1)
+ - nxp,potpg: Power on to power good time (duration the host controller has to
+ wait before accessing a power-on-port of the root hub) in units of 2 msecs.
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 9c37dad..dbf6f16 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -78,6 +78,7 @@
#include <linux/usb/isp1362.h>
#include <linux/usb/hcd.h>
#include <linux/platform_device.h>
+#include <linux/of.h>
#include <linux/pm.h>
#include <linux/io.h>
#include <linux/bitmap.h>
@@ -2678,13 +2679,62 @@ static int __devexit isp1362_remove(struct platform_device *pdev)
usb_put_hcd(hcd);
DBG(0, "%s: Done\n", __func__);
+ /*
+ * If we had no platform_data, we allocated the board struct
+ * dynamically and filled it from device tree.
+ */
+ if (!pdev->dev.platform_data)
+ kfree(isp1362_hcd->board);
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+
+/*
+ * Translate device tree nodes to platform data.
+ */
+static int isp1362_get_devtree_pdata(struct platform_device *pdev,
+ struct isp1362_platform_data *pdata)
+{
+ struct device_node *node = pdev->dev.of_node;
+ const __be32 *reg;
+ int len;
+
+ if (!node)
+ return -ENODEV;
+
+ pdata->sel15Kres = !!of_get_property(node, "nxp,sel15Kres", NULL);
+ pdata->clknotstop = !!of_get_property(node, "nxp,clknotstop", NULL);
+ pdata->oc_enable = !!of_get_property(node, "nxp,oc_enable", NULL);
+ pdata->int_act_high = !!of_get_property(node, "nxp,int_act_high", NULL);
+ pdata->int_edge_triggered =
+ !!of_get_property(node, "nxp,int_edge_triggered", NULL);
+ pdata->remote_wakeup_connected =
+ !!of_get_property(node, "nxp,remote_wakeup_connected", NULL);
+ pdata->no_power_switching =
+ !!of_get_property(node, "nxp,no_power_switching", NULL);
+ pdata->power_switching_mode =
+ !!of_get_property(node, "nxp,power_switching_mode", NULL);
+ reg = of_get_property(node, "nxp,potpg", &len);
+ if (reg && len == sizeof(__be32))
+ pdata->potpg = be32_to_cpup(reg);
+
return 0;
}
+#else
+static int isp1362_get_devtree_pdata(struct platform_device *pdev,
+ struct isp1362_platform_data *pdata)
+{
+ return -ENODEV;
+}
+#endif /* CONFIG_OF */
static int __devinit isp1362_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd;
struct isp1362_hcd *isp1362_hcd;
+ struct isp1362_platform_data *pdata;
struct resource *addr, *data;
void __iomem *addr_reg;
void __iomem *data_reg;
@@ -2755,12 +2805,31 @@ static int __devinit isp1362_probe(struct platform_device *pdev)
INIT_LIST_HEAD(&isp1362_hcd->periodic);
INIT_LIST_HEAD(&isp1362_hcd->isoc);
INIT_LIST_HEAD(&isp1362_hcd->remove_list);
- isp1362_hcd->board = pdev->dev.platform_data;
+
+ pdata = pdev->dev.platform_data;
+
+ /* If no platform data is available, try to get it from device tree */
+ if (!pdata) {
+ pdata = kzalloc(sizeof(struct isp1362_platform_data), GFP_KERNEL);
+ if (!pdata) {
+ retval = -ENOMEM;
+ goto err6;
+ }
+
+ retval = isp1362_get_devtree_pdata(pdev, pdata);
+ if (retval) {
+ kfree(pdata);
+ goto err6;
+ }
+ }
+
+ isp1362_hcd->board = pdata;
+
#if USE_PLATFORM_DELAY
if (!isp1362_hcd->board->delay) {
dev_err(hcd->self.controller, "No platform delay function given\n");
retval = -ENODEV;
- goto err6;
+ goto err7;
}
#endif
@@ -2775,13 +2844,20 @@ static int __devinit isp1362_probe(struct platform_device *pdev)
retval = usb_add_hcd(hcd, irq, irq_flags | IRQF_DISABLED | IRQF_SHARED);
if (retval != 0)
- goto err6;
+ goto err7;
pr_info("%s, irq %d\n", hcd->product_desc, irq);
create_debug_file(isp1362_hcd);
return 0;
+err7:
+ /*
+ * If we have no platform_data, we allocated the board struct
+ * dynamically.
+ */
+ if (!pdev->dev.platform_data)
+ kfree(isp1362_hcd->board);
err6:
DBG(0, "%s: Freeing dev %p\n", __func__, isp1362_hcd);
usb_put_hcd(hcd);
@@ -2852,6 +2928,16 @@ static int isp1362_resume(struct platform_device *pdev)
#define isp1362_resume NULL
#endif
+#ifdef CONFIG_OF
+static struct of_device_id isp1362_match[] = {
+ { .compatible = "nxp,usb-isp1362", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, isp1362_match);
+#else
+#define isp1362_match NULL
+#endif /* CONFIG_OF */
+
static struct platform_driver isp1362_driver = {
.probe = isp1362_probe,
.remove = __devexit_p(isp1362_remove),
@@ -2861,6 +2947,7 @@ static struct platform_driver isp1362_driver = {
.driver = {
.name = (char *)hcd_name,
.owner = THIS_MODULE,
+ .of_match_table = isp1362_match,
},
};
--
1.7.5.4
More information about the devicetree-discuss
mailing list