[PATCH 09/18] powerpc: Support device tree regardless of CPU endianness
Grant Likely
grant.likely at secretlab.ca
Sun Oct 3 14:15:55 EST 2010
On Fri, Oct 01, 2010 at 05:06:02PM +1000, Ian Munsie wrote:
> From: Ian Munsie <imunsie at au1.ibm.com>
>
> On PowerPC the device tree is always big endian, but the CPU could be
> either, so add be32_to_cpu where appropriate and change the types of
> device tree data to __be32 etc to allow sparse to locate endian issues.
>
> Signed-off-by: Ian Munsie <imunsie at au1.ibm.com>
Acked-by: Grant Likely <grant.likely at secretlab.ca>
But I won't merge this through my tree unless Ben asks me to.
g.
> ---
> arch/powerpc/kernel/prom.c | 60 ++++++++++++++++++++++----------------------
> 1 files changed, 30 insertions(+), 30 deletions(-)
>
> diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
> index fed9bf6..9b9ebb2 100644
> --- a/arch/powerpc/kernel/prom.c
> +++ b/arch/powerpc/kernel/prom.c
> @@ -188,16 +188,16 @@ static void __init check_cpu_pa_features(unsigned long node)
> #ifdef CONFIG_PPC_STD_MMU_64
> static void __init check_cpu_slb_size(unsigned long node)
> {
> - u32 *slb_size_ptr;
> + __be32 *slb_size_ptr;
>
> slb_size_ptr = of_get_flat_dt_prop(node, "slb-size", NULL);
> if (slb_size_ptr != NULL) {
> - mmu_slb_size = *slb_size_ptr;
> + mmu_slb_size = be32_to_cpup(slb_size_ptr);
> return;
> }
> slb_size_ptr = of_get_flat_dt_prop(node, "ibm,slb-size", NULL);
> if (slb_size_ptr != NULL) {
> - mmu_slb_size = *slb_size_ptr;
> + mmu_slb_size = be32_to_cpup(slb_size_ptr);
> }
> }
> #else
> @@ -252,11 +252,11 @@ static void __init check_cpu_feature_properties(unsigned long node)
> {
> unsigned long i;
> struct feature_property *fp = feature_properties;
> - const u32 *prop;
> + const __be32 *prop;
>
> for (i = 0; i < ARRAY_SIZE(feature_properties); ++i, ++fp) {
> prop = of_get_flat_dt_prop(node, fp->name, NULL);
> - if (prop && *prop >= fp->min_value) {
> + if (prop && be32_to_cpup(prop) >= fp->min_value) {
> cur_cpu_spec->cpu_features |= fp->cpu_feature;
> cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftr;
> }
> @@ -269,8 +269,8 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
> {
> static int logical_cpuid = 0;
> char *type = of_get_flat_dt_prop(node, "device_type", NULL);
> - const u32 *prop;
> - const u32 *intserv;
> + const __be32 *prop;
> + const __be32 *intserv;
> int i, nthreads;
> unsigned long len;
> int found = 0;
> @@ -297,9 +297,9 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
> * version 2 of the kexec param format adds the phys cpuid of
> * booted proc.
> */
> - if (initial_boot_params && initial_boot_params->version >= 2) {
> - if (intserv[i] ==
> - initial_boot_params->boot_cpuid_phys) {
> + if (initial_boot_params && be32_to_cpu(initial_boot_params->version) >= 2) {
> + if (be32_to_cpu(intserv[i]) ==
> + be32_to_cpu(initial_boot_params->boot_cpuid_phys)) {
> found = 1;
> break;
> }
> @@ -324,9 +324,9 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
>
> if (found) {
> DBG("boot cpu: logical %d physical %d\n", logical_cpuid,
> - intserv[i]);
> + be32_to_cpu(intserv[i]));
> boot_cpuid = logical_cpuid;
> - set_hard_smp_processor_id(boot_cpuid, intserv[i]);
> + set_hard_smp_processor_id(boot_cpuid, be32_to_cpu(intserv[i]));
>
> /*
> * PAPR defines "logical" PVR values for cpus that
> @@ -343,8 +343,8 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
> * it uses 0x0f000001.
> */
> prop = of_get_flat_dt_prop(node, "cpu-version", NULL);
> - if (prop && (*prop & 0xff000000) == 0x0f000000)
> - identify_cpu(0, *prop);
> + if (prop && (be32_to_cpup(prop) & 0xff000000) == 0x0f000000)
> + identify_cpu(0, be32_to_cpup(prop));
>
> identical_pvr_fixup(node);
> }
> @@ -365,7 +365,7 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
>
> void __init early_init_dt_scan_chosen_arch(unsigned long node)
> {
> - unsigned long *lprop;
> + unsigned long *lprop; /* All these set by kernel, so no need to convert endian */
>
> #ifdef CONFIG_PPC64
> /* check if iommu is forced on or off */
> @@ -524,16 +524,16 @@ void __init early_init_dt_setup_initrd_arch(unsigned long start,
> static void __init early_reserve_mem(void)
> {
> u64 base, size;
> - u64 *reserve_map;
> + __be64 *reserve_map;
> unsigned long self_base;
> unsigned long self_size;
>
> - reserve_map = (u64 *)(((unsigned long)initial_boot_params) +
> - initial_boot_params->off_mem_rsvmap);
> + reserve_map = (__be64 *)(((unsigned long)initial_boot_params) +
> + be32_to_cpu(initial_boot_params->off_mem_rsvmap));
>
> /* before we do anything, lets reserve the dt blob */
> self_base = __pa((unsigned long)initial_boot_params);
> - self_size = initial_boot_params->totalsize;
> + self_size = be32_to_cpu(initial_boot_params->totalsize);
> memblock_reserve(self_base, self_size);
>
> #ifdef CONFIG_BLK_DEV_INITRD
> @@ -547,13 +547,13 @@ static void __init early_reserve_mem(void)
> * Handle the case where we might be booting from an old kexec
> * image that setup the mem_rsvmap as pairs of 32-bit values
> */
> - if (*reserve_map > 0xffffffffull) {
> + if (be64_to_cpup(reserve_map) > 0xffffffffull) {
> u32 base_32, size_32;
> - u32 *reserve_map_32 = (u32 *)reserve_map;
> + __be32 *reserve_map_32 = (__be32 *)reserve_map;
>
> while (1) {
> - base_32 = *(reserve_map_32++);
> - size_32 = *(reserve_map_32++);
> + base_32 = be32_to_cpup(reserve_map_32++);
> + size_32 = be32_to_cpup(reserve_map_32++);
> if (size_32 == 0)
> break;
> /* skip if the reservation is for the blob */
> @@ -566,8 +566,8 @@ static void __init early_reserve_mem(void)
> }
> #endif
> while (1) {
> - base = *(reserve_map++);
> - size = *(reserve_map++);
> + base = be64_to_cpup(reserve_map++);
> + size = be64_to_cpup(reserve_map++);
> if (size == 0)
> break;
> DBG("reserving: %llx -> %llx\n", base, size);
> @@ -860,7 +860,7 @@ struct device_node *of_get_cpu_node(int cpu, unsigned int *thread)
> hardid = get_hard_smp_processor_id(cpu);
>
> for_each_node_by_type(np, "cpu") {
> - const u32 *intserv;
> + const __be32 *intserv;
> unsigned int plen, t;
>
> /* Check for ibm,ppc-interrupt-server#s. If it doesn't exist
> @@ -869,10 +869,10 @@ struct device_node *of_get_cpu_node(int cpu, unsigned int *thread)
> intserv = of_get_property(np, "ibm,ppc-interrupt-server#s",
> &plen);
> if (intserv == NULL) {
> - const u32 *reg = of_get_property(np, "reg", NULL);
> + const __be32 *reg = of_get_property(np, "reg", NULL);
> if (reg == NULL)
> continue;
> - if (*reg == hardid) {
> + if (be32_to_cpup(reg) == hardid) {
> if (thread)
> *thread = 0;
> return np;
> @@ -880,7 +880,7 @@ struct device_node *of_get_cpu_node(int cpu, unsigned int *thread)
> } else {
> plen /= sizeof(u32);
> for (t = 0; t < plen; t++) {
> - if (hardid == intserv[t]) {
> + if (hardid == be32_to_cpu(intserv[t])) {
> if (thread)
> *thread = t;
> return np;
> @@ -900,7 +900,7 @@ static int __init export_flat_device_tree(void)
> struct dentry *d;
>
> flat_dt_blob.data = initial_boot_params;
> - flat_dt_blob.size = initial_boot_params->totalsize;
> + flat_dt_blob.size = be32_to_cpu(initial_boot_params->totalsize);
>
> d = debugfs_create_blob("flat-device-tree", S_IFREG | S_IRUSR,
> powerpc_debugfs_root, &flat_dt_blob);
> --
> 1.7.1
>
More information about the devicetree-discuss
mailing list