[PATCH 0/2] of/phylib: Use device tree properties for PHY configuration.

[David Daney]

Here is my first take at using the device tree to control PHY
configuration.  This first set enables some Marvell PHYs.  If the
scheme is deemed acceptable, I would probably do something similar for
Broadcom PHYs as well.

The first patch is the meat of the change.  The second adds support
for the 88E1149R PHY that I have on one of my boards.

David Daney (2):
  of/phylib: Use device tree properties to initialize Marvell PHYs.
  phylib: Add support for Marvell 88E1149R devices.

 drivers/net/phy/marvell.c   |  135 +++++++++++++++++++++++++++++++++++++++++++
 include/linux/marvell_phy.h |    1 +
 2 files changed, 136 insertions(+), 0 deletions(-)

-- 
1.7.2.3