[PATCH 2/5] powerpc/5200: dts: rename nodes to prepare for refactoring dts files
John Bonesio
bones at secretlab.ca
Wed Nov 17 07:50:02 EST 2010
This patch renames nodes in dts fils for MPC5200b files to prepare for
refactoring of these files later. When refactoring it will be easier to verify
the results if the node names aren't changing at the same time.
Signed-off-by: John Bonesio <bones at secretlab.ca>
---
arch/powerpc/boot/dts/cm5200.dts | 8 ++++----
arch/powerpc/boot/dts/digsy_mtc.dts | 6 +++---
arch/powerpc/boot/dts/lite5200b.dts | 2 +-
arch/powerpc/boot/dts/media5200.dts | 2 +-
arch/powerpc/boot/dts/motionpro.dts | 10 +++++-----
arch/powerpc/boot/dts/mucmc52.dts | 6 +++---
arch/powerpc/boot/dts/pcm030.dts | 6 +++---
arch/powerpc/boot/dts/pcm032.dts | 6 +++---
arch/powerpc/boot/dts/uc101.dts | 6 +++---
9 files changed, 26 insertions(+), 26 deletions(-)
diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts
index dd38608..9369dcd 100644
--- a/arch/powerpc/boot/dts/cm5200.dts
+++ b/arch/powerpc/boot/dts/cm5200.dts
@@ -160,25 +160,25 @@
reg = <0x1f00 0x100>;
};
- serial at 2000 { // PSC1
+ psc at 2000 { // PSC1
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2000 0x100>;
interrupts = <2 1 0>;
};
- serial at 2200 { // PSC2
+ psc at 2200 { // PSC2
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2200 0x100>;
interrupts = <2 2 0>;
};
- serial at 2400 { // PSC3
+ psc at 2400 { // PSC3
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2400 0x100>;
interrupts = <2 3 0>;
};
- serial at 2c00 { // PSC6
+ psc at 2c00 { // PSC6
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2c00 0x100>;
interrupts = <2 4 0>;
diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts
index 8e9be6b..f0592de 100644
--- a/arch/powerpc/boot/dts/digsy_mtc.dts
+++ b/arch/powerpc/boot/dts/digsy_mtc.dts
@@ -155,13 +155,13 @@
reg = <0x1f00 0x100>;
};
- serial at 2600 { // PSC4
+ psc at 2600 { // PSC4
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2600 0x100>;
interrupts = <2 11 0>;
};
- serial at 2800 { // PSC5
+ psc at 2800 { // PSC5
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2800 0x100>;
interrupts = <2 12 0>;
@@ -217,7 +217,7 @@
};
};
- lpb {
+ localbus {
compatible = "fsl,mpc5200b-lpb","simple-bus";
#address-cells = <2>;
#size-cells = <1>;
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index 59702ac..a74b790 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -172,7 +172,7 @@
reg = <0x1f00 0x100>;
};
- serial at 2000 { // PSC1
+ psc at 2000 { // PSC1
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
cell-index = <0>;
reg = <0x2000 0x100>;
diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts
index 0c3902b..a70ef68 100644
--- a/arch/powerpc/boot/dts/media5200.dts
+++ b/arch/powerpc/boot/dts/media5200.dts
@@ -183,7 +183,7 @@
};
// PSC6 in uart mode
- console: serial at 2c00 { // PSC6
+ console: psc at 2c00 { // PSC6
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
cell-index = <5>;
port-number = <0>; // Logical port assignment
diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts
index 6ca4fc1..f6261ea 100644
--- a/arch/powerpc/boot/dts/motionpro.dts
+++ b/arch/powerpc/boot/dts/motionpro.dts
@@ -100,7 +100,7 @@
interrupts = <1 14 0>;
};
- motionpro-led at 660 { // Motion-PRO status LED
+ timer at 660 { // Motion-PRO status LED
compatible = "promess,motionpro-led";
label = "motionpro-statusled";
reg = <0x660 0x10>;
@@ -108,7 +108,7 @@
blink-delay = <100>; // 100 msec
};
- motionpro-led at 670 { // Motion-PRO ready LED
+ timer at 670 { // Motion-PRO ready LED
compatible = "promess,motionpro-led";
label = "motionpro-readyled";
reg = <0x670 0x10>;
@@ -169,14 +169,14 @@
reg = <0x1f00 0x100>;
};
- serial at 2000 { // PSC1
+ psc at 2000 { // PSC1
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2000 0x100>;
interrupts = <2 1 0>;
};
// PSC2 in spi master mode
- spi at 2200 { // PSC2
+ psc at 2200 { // PSC2
compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
cell-index = <1>;
reg = <0x2200 0x100>;
@@ -184,7 +184,7 @@
};
// PSC5 in uart mode
- serial at 2800 { // PSC5
+ psc at 2800 { // PSC5
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2800 0x100>;
interrupts = <2 12 0>;
diff --git a/arch/powerpc/boot/dts/mucmc52.dts b/arch/powerpc/boot/dts/mucmc52.dts
index b72a758..8dc212d 100644
--- a/arch/powerpc/boot/dts/mucmc52.dts
+++ b/arch/powerpc/boot/dts/mucmc52.dts
@@ -126,19 +126,19 @@
reg = <0x1f00 0x100>;
};
- serial at 2000 { /* PSC1 in UART mode */
+ psc at 2000 { /* PSC1 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2000 0x100>;
interrupts = <2 1 0>;
};
- serial at 2200 { /* PSC2 in UART mode */
+ psc at 2200 { /* PSC2 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2200 0x100>;
interrupts = <2 2 0>;
};
- serial at 2c00 { /* PSC6 in UART mode */
+ psc at 2c00 { /* PSC6 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2c00 0x100>;
interrupts = <2 4 0>;
diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts
index 8a4ec30..3a4f554 100644
--- a/arch/powerpc/boot/dts/pcm030.dts
+++ b/arch/powerpc/boot/dts/pcm030.dts
@@ -185,7 +185,7 @@
reg = <0x1f00 0x100>;
};
- ac97 at 2000 { /* PSC1 in ac97 mode */
+ psc at 2000 { /* PSC1 in ac97 mode */
compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
cell-index = <0>;
reg = <0x2000 0x100>;
@@ -194,7 +194,7 @@
/* PSC2 port is used by CAN1/2 */
- serial at 2400 { /* PSC3 in UART mode */
+ psc at 2400 { /* PSC3 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
cell-index = <2>;
reg = <0x2400 0x100>;
@@ -205,7 +205,7 @@
/* PSC5 is ??? */
- serial at 2c00 { /* PSC6 in UART mode */
+ psc at 2c00 { /* PSC6 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
cell-index = <5>;
reg = <0x2c00 0x100>;
diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts
index 85d857a..17596c7 100644
--- a/arch/powerpc/boot/dts/pcm032.dts
+++ b/arch/powerpc/boot/dts/pcm032.dts
@@ -185,7 +185,7 @@
reg = <0x1f00 0x100>;
};
- ac97 at 2000 { /* PSC1 is ac97 */
+ psc at 2000 { /* PSC1 is ac97 */
compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
cell-index = <0>;
reg = <0x2000 0x100>;
@@ -194,7 +194,7 @@
/* PSC2 port is used by CAN1/2 */
- serial at 2400 { /* PSC3 in UART mode */
+ psc at 2400 { /* PSC3 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
cell-index = <2>;
reg = <0x2400 0x100>;
@@ -205,7 +205,7 @@
/* PSC5 is ??? */
- serial at 2c00 { /* PSC6 in UART mode */
+ psc at 2c00 { /* PSC6 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
cell-index = <5>;
reg = <0x2c00 0x100>;
diff --git a/arch/powerpc/boot/dts/uc101.dts b/arch/powerpc/boot/dts/uc101.dts
index 019264c..e00441a 100644
--- a/arch/powerpc/boot/dts/uc101.dts
+++ b/arch/powerpc/boot/dts/uc101.dts
@@ -158,19 +158,19 @@
reg = <0x1f00 0x100>;
};
- serial at 2000 { /* PSC1 in UART mode */
+ psc at 2000 { /* PSC1 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2000 0x100>;
interrupts = <2 1 0>;
};
- serial at 2200 { /* PSC2 in UART mode */
+ psc at 2200 { /* PSC2 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2200 0x100>;
interrupts = <2 2 0>;
};
- serial at 2c00 { /* PSC6 in UART mode */
+ psc at 2c00 { /* PSC6 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2c00 0x100>;
interrupts = <2 4 0>;
More information about the devicetree-discuss
mailing list