[PATCH] of/flattree: Use common ALIGN() macro instead of archspecific _ALIGN

[Stephen Neuendorffer]

Grant,

I need this for the PCI project.  I also have a couple of other
generalizations of the drivers/of code
to get it to run after boot time in an X86 system...

Steve

Reviewed-by: Stephen Neuendorffer <stephen.neuendorffer at xilinx.com>

> -----Original Message-----
> From:
devicetree-discuss-bounces+stephen.neuendorffer=xilinx.com at lists.ozlabs.
org [mailto:devicetree-
> discuss-bounces+stephen.neuendorffer=xilinx.com at lists.ozlabs.org] On
Behalf Of Grant Likely
> Sent: Friday, June 25, 2010 3:03 PM
> To: benh at kernel.crashing.org; monstr at monstr.eu
> Cc: microblaze-uclinux at itee.uq.edu.au;
devicetree-discuss at lists.ozlabs.org; linux-
> kernel at vger.kernel.org; jeremy.kerr at canonical.com;
sfr at canb.auug.org.au
> Subject: [PATCH] of/flattree: Use common ALIGN() macro instead of
archspecific _ALIGN
> 
> There's no reason to use the powerpc-specific _ALIGN macro in the fdt
> code.  Replace it with ALIGN() from kernel.h
> 
> Signed-off-by: Grant Likely <grant.likely at secretlab.ca>
> ---
>  arch/microblaze/include/asm/page.h |    7 -------
>  drivers/of/fdt.c                   |   20 ++++++++++----------
>  2 files changed, 10 insertions(+), 17 deletions(-)
> 
> diff --git a/arch/microblaze/include/asm/page.h
b/arch/microblaze/include/asm/page.h
> index 464ff32..2fd4761 100644
> --- a/arch/microblaze/include/asm/page.h
> +++ b/arch/microblaze/include/asm/page.h
> @@ -39,13 +39,6 @@
>  #define PAGE_UP(addr)
(((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1)))
>  #define PAGE_DOWN(addr)	((addr)&(~((PAGE_SIZE)-1)))
> 
> -/* align addr on a size boundary - adjust address up/down if needed
*/
> -#define _ALIGN_UP(addr, size)
(((addr)+((size)-1))&(~((size)-1)))
> -#define _ALIGN_DOWN(addr, size)	((addr)&(~((size)-1)))
> -
> -/* align addr on a size boundary - adjust address up if needed */
> -#define _ALIGN(addr, size)	_ALIGN_UP(addr, size)
> -
>  #ifndef CONFIG_MMU
>  /*
>   * PAGE_OFFSET -- the first address of the first page of memory. When
not
> diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
> index b6987bb..d61fda8 100644
> --- a/drivers/of/fdt.c
> +++ b/drivers/of/fdt.c
> @@ -69,9 +69,9 @@ int __init of_scan_flat_dt(int (*it)(unsigned long
node,
>  			u32 sz = be32_to_cpup((__be32 *)p);
>  			p += 8;
>  			if (be32_to_cpu(initial_boot_params->version) <
0x10)
> -				p = _ALIGN(p, sz >= 8 ? 8 : 4);
> +				p = ALIGN(p, sz >= 8 ? 8 : 4);
>  			p += sz;
> -			p = _ALIGN(p, 4);
> +			p = ALIGN(p, 4);
>  			continue;
>  		}
>  		if (tag != OF_DT_BEGIN_NODE) {
> @@ -80,7 +80,7 @@ int __init of_scan_flat_dt(int (*it)(unsigned long
node,
>  		}
>  		depth++;
>  		pathp = (char *)p;
> -		p = _ALIGN(p + strlen(pathp) + 1, 4);
> +		p = ALIGN(p + strlen(pathp) + 1, 4);
>  		if ((*pathp) == '/') {
>  			char *lp, *np;
>  			for (lp = NULL, np = pathp; *np; np++)
> @@ -109,7 +109,7 @@ unsigned long __init of_get_flat_dt_root(void)
>  		p += 4;
>  	BUG_ON(be32_to_cpup((__be32 *)p) != OF_DT_BEGIN_NODE);
>  	p += 4;
> -	return _ALIGN(p + strlen((char *)p) + 1, 4);
> +	return ALIGN(p + strlen((char *)p) + 1, 4);
>  }
> 
>  /**
> @@ -138,7 +138,7 @@ void *__init of_get_flat_dt_prop(unsigned long
node, const char *name,
>  		noff = be32_to_cpup((__be32 *)(p + 4));
>  		p += 8;
>  		if (be32_to_cpu(initial_boot_params->version) < 0x10)
> -			p = _ALIGN(p, sz >= 8 ? 8 : 4);
> +			p = ALIGN(p, sz >= 8 ? 8 : 4);
> 
>  		nstr = find_flat_dt_string(noff);
>  		if (nstr == NULL) {
> @@ -151,7 +151,7 @@ void *__init of_get_flat_dt_prop(unsigned long
node, const char *name,
>  			return (void *)p;
>  		}
>  		p += sz;
> -		p = _ALIGN(p, 4);
> +		p = ALIGN(p, 4);
>  	} while (1);
>  }
> 
> @@ -184,7 +184,7 @@ static void *__init unflatten_dt_alloc(unsigned
long *mem, unsigned long size,
>  {
>  	void *res;
> 
> -	*mem = _ALIGN(*mem, align);
> +	*mem = ALIGN(*mem, align);
>  	res = (void *)*mem;
>  	*mem += size;
> 
> @@ -220,7 +220,7 @@ unsigned long __init unflatten_dt_node(unsigned
long mem,
>  	*p += 4;
>  	pathp = (char *)*p;
>  	l = allocl = strlen(pathp) + 1;
> -	*p = _ALIGN(*p + l, 4);
> +	*p = ALIGN(*p + l, 4);
> 
>  	/* version 0x10 has a more compact unit name here instead of the
full
>  	 * path. we accumulate the full path size using "fpsize", we'll
rebuild
> @@ -299,7 +299,7 @@ unsigned long __init unflatten_dt_node(unsigned
long mem,
>  		noff = be32_to_cpup((__be32 *)((*p) + 4));
>  		*p += 8;
>  		if (be32_to_cpu(initial_boot_params->version) < 0x10)
> -			*p = _ALIGN(*p, sz >= 8 ? 8 : 4);
> +			*p = ALIGN(*p, sz >= 8 ? 8 : 4);
> 
>  		pname = find_flat_dt_string(noff);
>  		if (pname == NULL) {
> @@ -333,7 +333,7 @@ unsigned long __init unflatten_dt_node(unsigned
long mem,
>  			*prev_pp = pp;
>  			prev_pp = &pp->next;
>  		}
> -		*p = _ALIGN((*p) + sz, 4);
> +		*p = ALIGN((*p) + sz, 4);
>  	}
>  	/* with version 0x10 we may not have the name property, recreate
>  	 * it here from the unit name if absent
> 
> _______________________________________________
> devicetree-discuss mailing list
> devicetree-discuss at lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/devicetree-discuss


This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.