Request review of device tree documentation

[Mitch Bradley]

Benjamin Herrenschmidt wrote:
> On Sat, 2010-06-12 at 20:45 +1000, Benjamin Herrenschmidt wrote:
>   
>> On Fri, 2010-06-11 at 22:19 -1000, Mitch Bradley wrote:
>>     
>>> It seems that many of the differences at the CPU level can be determined 
>>> by looking at "coprocessor" registers.  For what purpose(s) do we need 
>>> to identify the core?  That will inform our choice of a core ID schema.
>>>       
>> The primary thing I see would be architecture version compliance,
>> though this is better carried additionally via a binary field in
>> the header or a GPR at the entry point, to help the initial asm
>> code to setup the MMU etc... before getting into C code.
>>     
>
> Also, if you're going to revive a "real" OF port to ARM (with client
> interface etc...), should we start considering moving some of powerpc's
> prom_init.c to a generic place ?
>
> IE. prom_init is a trampoline that uses the client interface to
> essentially create a flatten device-tree and enter the kernel via the
> common "epapr" style entry point.
>
> The main drawback is that it doesn't allow to keep OF alive along with
> the OS, but then, only sparc does that successfully and I'm not sure
> it's something that would be practical to do on ARM either.
>   

I'm certainly going to try keeping OFW alive.  On the x86 OLPC machines, 
the ability to
dive into OFW via a SysRq key combo was very helpful for debugging some 
difficult
problems.  The team has asked me to support the feature on ARM.

> Cheers,
> Ben.
>  
>
>