[PATCH 1/5] of/irq: Move irq_of_parse_and_map() to common code
Benjamin Herrenschmidt
benh at kernel.crashing.org
Thu Jun 10 16:33:16 EST 2010
On Fri, 2010-06-04 at 15:21 -0600, Grant Likely wrote:
> Merge common code between PowerPC and Microblaze. SPARC implements
> irq_of_parse_and_map(), but the implementation is different, so it
> does not use this code.
>
> Signed-off-by: Grant Likely <grant.likely at secretlab.ca>
> CC: Michal Simek <monstr at monstr.eu>
> CC: "David S. Miller" <davem at davemloft.net>
> CC: Stephen Rothwell <sfr at canb.auug.org.au>
Acked-by : Benjamin Herrenschmidt <benh at kernel.crashing.org>
> CC: Jeremy Kerr <jeremy.kerr at canonical.com>
> CC: microblaze-uclinux at itee.uq.edu.au
> CC: linuxppc-dev at ozlabs.org
> CC: sparclinux at vger.kernel.org
> CC: devicetree-discuss at lists.ozlabs.org
> ---
> arch/microblaze/include/asm/irq.h | 13 -----------
> arch/microblaze/include/asm/prom.h | 26 +----------------------
> arch/microblaze/kernel/irq.c | 14 ++----------
> arch/powerpc/include/asm/irq.h | 13 -----------
> arch/powerpc/include/asm/prom.h | 27 +-----------------------
> arch/powerpc/kernel/irq.c | 14 ++----------
> arch/sparc/include/asm/prom.h | 1 -
> drivers/of/Kconfig | 4 ++++
> drivers/of/Makefile | 1 +
> drivers/of/irq.c | 37 ++++++++++++++++++++++++++++++++
> drivers/of/of_mdio.c | 1 +
> include/linux/of_irq.h | 41 ++++++++++++++++++++++++++++++++++++
> 12 files changed, 90 insertions(+), 102 deletions(-)
> create mode 100644 drivers/of/irq.c
> create mode 100644 include/linux/of_irq.h
>
> diff --git a/arch/microblaze/include/asm/irq.h b/arch/microblaze/include/asm/irq.h
> index 31a35c3..10d75c1 100644
> --- a/arch/microblaze/include/asm/irq.h
> +++ b/arch/microblaze/include/asm/irq.h
> @@ -62,17 +62,4 @@ struct irq_host;
> extern unsigned int irq_create_mapping(struct irq_host *host,
> irq_hw_number_t hwirq);
>
> -/**
> - * irq_create_of_mapping - Map a hardware interrupt into linux virq space
> - * @controller: Device node of the interrupt controller
> - * @inspec: Interrupt specifier from the device-tree
> - * @intsize: Size of the interrupt specifier from the device-tree
> - *
> - * This function is identical to irq_create_mapping except that it takes
> - * as input informations straight from the device-tree (typically the results
> - * of the of_irq_map_*() functions.
> - */
> -extern unsigned int irq_create_of_mapping(struct device_node *controller,
> - u32 *intspec, unsigned int intsize);
> -
> #endif /* _ASM_MICROBLAZE_IRQ_H */
> diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h
> index e7d67a3..e9fb2eb 100644
> --- a/arch/microblaze/include/asm/prom.h
> +++ b/arch/microblaze/include/asm/prom.h
> @@ -20,6 +20,7 @@
> #ifndef __ASSEMBLY__
>
> #include <linux/types.h>
> +#include <linux/of_irq.h>
> #include <linux/of_fdt.h>
> #include <linux/proc_fs.h>
> #include <linux/platform_device.h>
> @@ -92,18 +93,6 @@ extern const void *of_get_mac_address(struct device_node *np);
> * OF interrupt mapping
> */
>
> -/* This structure is returned when an interrupt is mapped. The controller
> - * field needs to be put() after use
> - */
> -
> -#define OF_MAX_IRQ_SPEC 4 /* We handle specifiers of at most 4 cells */
> -
> -struct of_irq {
> - struct device_node *controller; /* Interrupt controller node */
> - u32 size; /* Specifier size */
> - u32 specifier[OF_MAX_IRQ_SPEC]; /* Specifier copy */
> -};
> -
> /**
> * of_irq_map_init - Initialize the irq remapper
> * @flags: flags defining workarounds to enable
> @@ -139,19 +128,6 @@ extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec,
> struct of_irq *out_irq);
>
> /**
> - * of_irq_map_one - Resolve an interrupt for a device
> - * @device: the device whose interrupt is to be resolved
> - * @index: index of the interrupt to resolve
> - * @out_irq: structure of_irq filled by this function
> - *
> - * This function resolves an interrupt, walking the tree, for a given
> - * device-tree node. It's the high level pendant to of_irq_map_raw().
> - * It also implements the workarounds for OldWolrd Macs.
> - */
> -extern int of_irq_map_one(struct device_node *device, int index,
> - struct of_irq *out_irq);
> -
> -/**
> * of_irq_map_pci - Resolve the interrupt for a PCI device
> * @pdev: the device whose interrupt is to be resolved
> * @out_irq: structure of_irq filled by this function
> diff --git a/arch/microblaze/kernel/irq.c b/arch/microblaze/kernel/irq.c
> index 8f120ac..dd32b09 100644
> --- a/arch/microblaze/kernel/irq.c
> +++ b/arch/microblaze/kernel/irq.c
> @@ -17,20 +17,10 @@
> #include <linux/seq_file.h>
> #include <linux/kernel_stat.h>
> #include <linux/irq.h>
> +#include <linux/of_irq.h>
>
> #include <asm/prom.h>
>
> -unsigned int irq_of_parse_and_map(struct device_node *dev, int index)
> -{
> - struct of_irq oirq;
> -
> - if (of_irq_map_one(dev, index, &oirq))
> - return NO_IRQ;
> -
> - return oirq.specifier[0];
> -}
> -EXPORT_SYMBOL_GPL(irq_of_parse_and_map);
> -
> static u32 concurrent_irq;
>
> void __irq_entry do_IRQ(struct pt_regs *regs)
> @@ -104,7 +94,7 @@ unsigned int irq_create_mapping(struct irq_host *host, irq_hw_number_t hwirq)
> EXPORT_SYMBOL_GPL(irq_create_mapping);
>
> unsigned int irq_create_of_mapping(struct device_node *controller,
> - u32 *intspec, unsigned int intsize)
> + const u32 *intspec, unsigned int intsize)
> {
> return intspec[0];
> }
> diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h
> index e054bae..a3b5124 100644
> --- a/arch/powerpc/include/asm/irq.h
> +++ b/arch/powerpc/include/asm/irq.h
> @@ -304,19 +304,6 @@ extern void irq_free_virt(unsigned int virq, unsigned int count);
> /* -- OF helpers -- */
>
> /**
> - * irq_create_of_mapping - Map a hardware interrupt into linux virq space
> - * @controller: Device node of the interrupt controller
> - * @inspec: Interrupt specifier from the device-tree
> - * @intsize: Size of the interrupt specifier from the device-tree
> - *
> - * This function is identical to irq_create_mapping except that it takes
> - * as input informations straight from the device-tree (typically the results
> - * of the of_irq_map_*() functions.
> - */
> -extern unsigned int irq_create_of_mapping(struct device_node *controller,
> - const u32 *intspec, unsigned int intsize);
> -
> -/**
> * irq_of_parse_and_map - Parse and Map an interrupt into linux virq space
> * @device: Device node of the device whose interrupt is to be mapped
> * @index: Index of the interrupt to map
> diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
> index ddd408a..47d41b6 100644
> --- a/arch/powerpc/include/asm/prom.h
> +++ b/arch/powerpc/include/asm/prom.h
> @@ -18,6 +18,7 @@
> */
> #include <linux/types.h>
> #include <linux/of_fdt.h>
> +#include <linux/of_irq.h>
> #include <linux/proc_fs.h>
> #include <linux/platform_device.h>
> #include <asm/irq.h>
> @@ -108,18 +109,6 @@ extern const void *of_get_mac_address(struct device_node *np);
> * OF interrupt mapping
> */
>
> -/* This structure is returned when an interrupt is mapped. The controller
> - * field needs to be put() after use
> - */
> -
> -#define OF_MAX_IRQ_SPEC 4 /* We handle specifiers of at most 4 cells */
> -
> -struct of_irq {
> - struct device_node *controller; /* Interrupt controller node */
> - u32 size; /* Specifier size */
> - u32 specifier[OF_MAX_IRQ_SPEC]; /* Specifier copy */
> -};
> -
> /**
> * of_irq_map_init - Initialize the irq remapper
> * @flags: flags defining workarounds to enable
> @@ -154,20 +143,6 @@ extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec,
> u32 ointsize, const u32 *addr,
> struct of_irq *out_irq);
>
> -
> -/**
> - * of_irq_map_one - Resolve an interrupt for a device
> - * @device: the device whose interrupt is to be resolved
> - * @index: index of the interrupt to resolve
> - * @out_irq: structure of_irq filled by this function
> - *
> - * This function resolves an interrupt, walking the tree, for a given
> - * device-tree node. It's the high level pendant to of_irq_map_raw().
> - * It also implements the workarounds for OldWolrd Macs.
> - */
> -extern int of_irq_map_one(struct device_node *device, int index,
> - struct of_irq *out_irq);
> -
> /**
> * of_irq_map_pci - Resolve the interrupt for a PCI device
> * @pdev: the device whose interrupt is to be resolved
> diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
> index 30817d9..2676ef2 100644
> --- a/arch/powerpc/kernel/irq.c
> +++ b/arch/powerpc/kernel/irq.c
> @@ -53,6 +53,8 @@
> #include <linux/bootmem.h>
> #include <linux/pci.h>
> #include <linux/debugfs.h>
> +#include <linux/of.h>
> +#include <linux/of_irq.h>
>
> #include <asm/uaccess.h>
> #include <asm/system.h>
> @@ -813,18 +815,6 @@ unsigned int irq_create_of_mapping(struct device_node *controller,
> }
> EXPORT_SYMBOL_GPL(irq_create_of_mapping);
>
> -unsigned int irq_of_parse_and_map(struct device_node *dev, int index)
> -{
> - struct of_irq oirq;
> -
> - if (of_irq_map_one(dev, index, &oirq))
> - return NO_IRQ;
> -
> - return irq_create_of_mapping(oirq.controller, oirq.specifier,
> - oirq.size);
> -}
> -EXPORT_SYMBOL_GPL(irq_of_parse_and_map);
> -
> void irq_dispose_mapping(unsigned int virq)
> {
> struct irq_host *host;
> diff --git a/arch/sparc/include/asm/prom.h b/arch/sparc/include/asm/prom.h
> index f845828..ac69574 100644
> --- a/arch/sparc/include/asm/prom.h
> +++ b/arch/sparc/include/asm/prom.h
> @@ -56,7 +56,6 @@ extern void of_fill_in_cpu_data(void);
> * register them in the of_device objects, whereas powerpc computes them
> * on request.
> */
> -extern unsigned int irq_of_parse_and_map(struct device_node *node, int index);
> static inline void irq_dispose_mapping(unsigned int virq)
> {
> }
> diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
> index 7cecc8f..b87495e 100644
> --- a/drivers/of/Kconfig
> +++ b/drivers/of/Kconfig
> @@ -6,6 +6,10 @@ config OF_DYNAMIC
> def_bool y
> depends on OF && PPC_OF
>
> +config OF_IRQ
> + def_bool y
> + depends on OF && !SPARC
> +
> config OF_DEVICE
> def_bool y
> depends on OF && (SPARC || PPC_OF || MICROBLAZE)
> diff --git a/drivers/of/Makefile b/drivers/of/Makefile
> index f232cc9..3631a5e 100644
> --- a/drivers/of/Makefile
> +++ b/drivers/of/Makefile
> @@ -1,5 +1,6 @@
> obj-y = base.o
> obj-$(CONFIG_OF_FLATTREE) += fdt.o
> +obj-$(CONFIG_OF_IRQ) += irq.o
> obj-$(CONFIG_OF_DEVICE) += device.o platform.o
> obj-$(CONFIG_OF_GPIO) += gpio.o
> obj-$(CONFIG_OF_I2C) += of_i2c.o
> diff --git a/drivers/of/irq.c b/drivers/of/irq.c
> new file mode 100644
> index 0000000..56ad1aa
> --- /dev/null
> +++ b/drivers/of/irq.c
> @@ -0,0 +1,37 @@
> +/*
> + * Derived from arch/i386/kernel/irq.c
> + * Copyright (C) 1992 Linus Torvalds
> + * Adapted from arch/i386 by Gary Thomas
> + * Copyright (C) 1995-1996 Gary Thomas (gdt at linuxppc.org)
> + * Updated and modified by Cort Dougan <cort at fsmlabs.com>
> + * Copyright (C) 1996-2001 Cort Dougan
> + * Adapted for Power Macintosh by Paul Mackerras
> + * Copyright (C) 1996 Paul Mackerras (paulus at cs.anu.edu.au)
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version
> + * 2 of the License, or (at your option) any later version.
> + *
> + * This file contains the code used to make IRQ descriptions in the
> + * device tree to actual irq numbers on an interrupt controller
> + * driver.
> + */
> +
> +#include <linux/errno.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_irq.h>
> +#include <linux/string.h>
> +
> +unsigned int irq_of_parse_and_map(struct device_node *dev, int index)
> +{
> + struct of_irq oirq;
> +
> + if (of_irq_map_one(dev, index, &oirq))
> + return NO_IRQ;
> +
> + return irq_create_of_mapping(oirq.controller, oirq.specifier,
> + oirq.size);
> +}
> +EXPORT_SYMBOL_GPL(irq_of_parse_and_map);
> diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
> index 42a6715..1fce00e 100644
> --- a/drivers/of/of_mdio.c
> +++ b/drivers/of/of_mdio.c
> @@ -15,6 +15,7 @@
> #include <linux/err.h>
> #include <linux/phy.h>
> #include <linux/of.h>
> +#include <linux/of_irq.h>
> #include <linux/of_mdio.h>
> #include <linux/module.h>
>
> diff --git a/include/linux/of_irq.h b/include/linux/of_irq.h
> new file mode 100644
> index 0000000..0e37c05
> --- /dev/null
> +++ b/include/linux/of_irq.h
> @@ -0,0 +1,41 @@
> +#ifndef __OF_IRQ_H
> +#define __OF_IRQ_H
> +
> +#if defined(CONFIG_OF)
> +struct of_irq;
> +#include <linux/types.h>
> +#include <linux/of.h>
> +
> +/*
> + * irq_of_parse_and_map() is used ba all OF enabled platforms; but SPARC
> + * implements it differently. However, the prototype is the same for all,
> + * so declare it here regardless of the CONFIG_OF_IRQ setting.
> + */
> +extern unsigned int irq_of_parse_and_map(struct device_node *node, int index);
> +
> +#if defined(CONFIG_OF_IRQ)
> +/**
> + * of_irq - container for device_node/irq_specifier pair for an irq controller
> + * @controller: pointer to interrupt controller device tree node
> + * @size: size of interrupt specifier
> + * @specifier: array of cells @size long specifing the specific interrupt
> + *
> + * This structure is returned when an interrupt is mapped. The controller
> + * field needs to be put() after use
> + */
> +#define OF_MAX_IRQ_SPEC 4 /* We handle specifiers of at most 4 cells */
> +struct of_irq {
> + struct device_node *controller; /* Interrupt controller node */
> + u32 size; /* Specifier size */
> + u32 specifier[OF_MAX_IRQ_SPEC]; /* Specifier copy */
> +};
> +
> +extern int of_irq_map_one(struct device_node *device, int index,
> + struct of_irq *out_irq);
> +extern unsigned int irq_create_of_mapping(struct device_node *controller,
> + const u32 *intspec,
> + unsigned int intsize);
> +
> +#endif /* CONFIG_OF_IRQ */
> +#endif /* CONFIG_OF */
> +#endif /* __OF_IRQ_H */
More information about the devicetree-discuss
mailing list