[PATCH v4 5/5] fsl-diu-fb: Support setting display mode using EDID
Anatolij Gustschin
agust at denx.de
Sat Jul 24 00:00:39 EST 2010
Adds support for encoding display mode information
in the device tree using verbatim EDID block.
If the EDID entry in the DIU node is present, the
driver will build mode database using EDID data
and allow setting the display modes from this database.
Otherwise display mode will be set using mode
entries from driver's internal database as usual.
This patch also updates device tree bindings.
Signed-off-by: Anatolij Gustschin <agust at denx.de>
Acked-by: Timur Tabi <timur at freescale.com>
Cc: devicetree-discuss at lists.ozlabs.org
---
v4:
- rebased to apply on current tree
- added ack tag
v3:
- no changes
v1 -> v2:
- fix EDID property to be lower-case
- use u8 * type for EDID block pointer
- simplify "info->monspecs.modedb != NULL" condition test
Documentation/powerpc/dts-bindings/fsl/diu.txt | 6 ++
drivers/video/Kconfig | 1 +
drivers/video/fsl-diu-fb.c | 80 ++++++++++++++++++++++--
3 files changed, 81 insertions(+), 6 deletions(-)
diff --git a/Documentation/powerpc/dts-bindings/fsl/diu.txt b/Documentation/powerpc/dts-bindings/fsl/diu.txt
index 326cddf..b66cb6d 100644
--- a/Documentation/powerpc/dts-bindings/fsl/diu.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/diu.txt
@@ -11,6 +11,11 @@ Required properties:
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
+Optional properties:
+- edid : verbatim EDID data block describing attached display.
+ Data from the detailed timing descriptor will be used to
+ program the display controller.
+
Example (MPC8610HPCD):
display at 2c000 {
compatible = "fsl,diu";
@@ -25,4 +30,5 @@ Example for MPC5121:
reg = <0x2100 0x100>;
interrupts = <64 0x8>;
interrupt-parent = <&ipic>;
+ edid = [edid-data];
};
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index a9f9e5e..c01b648 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1871,6 +1871,7 @@ config FB_MBX_DEBUG
config FB_FSL_DIU
tristate "Freescale DIU framebuffer support"
depends on FB && FSL_SOC
+ select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c
index db3e360..e38ad22 100644
--- a/drivers/video/fsl-diu-fb.c
+++ b/drivers/video/fsl-diu-fb.c
@@ -35,6 +35,7 @@
#include <sysdev/fsl_soc.h>
#include <linux/fsl-diu-fb.h>
+#include "edid.h"
/*
* These parameters give default parameters
@@ -217,6 +218,7 @@ struct mfb_info {
int x_aoi_d; /* aoi display x offset to physical screen */
int y_aoi_d; /* aoi display y offset to physical screen */
struct fsl_diu_data *parent;
+ u8 *edid_data;
};
@@ -1185,18 +1187,30 @@ static int __devinit install_fb(struct fb_info *info)
int rc;
struct mfb_info *mfbi = info->par;
const char *aoi_mode, *init_aoi_mode = "320x240";
+ struct fb_videomode *db = fsl_diu_mode_db;
+ unsigned int dbsize = ARRAY_SIZE(fsl_diu_mode_db);
+ int has_default_mode = 1;
if (init_fbinfo(info))
return -EINVAL;
- if (mfbi->index == 0) /* plane 0 */
+ if (mfbi->index == 0) { /* plane 0 */
+ if (mfbi->edid_data) {
+ /* Now build modedb from EDID */
+ fb_edid_to_monspecs(mfbi->edid_data, &info->monspecs);
+ fb_videomode_to_modelist(info->monspecs.modedb,
+ info->monspecs.modedb_len,
+ &info->modelist);
+ db = info->monspecs.modedb;
+ dbsize = info->monspecs.modedb_len;
+ }
aoi_mode = fb_mode;
- else
+ } else {
aoi_mode = init_aoi_mode;
+ }
pr_debug("mode used = %s\n", aoi_mode);
- rc = fb_find_mode(&info->var, info, aoi_mode, fsl_diu_mode_db,
- ARRAY_SIZE(fsl_diu_mode_db), &fsl_diu_default_mode, default_bpp);
-
+ rc = fb_find_mode(&info->var, info, aoi_mode, db, dbsize,
+ &fsl_diu_default_mode, default_bpp);
switch (rc) {
case 1:
pr_debug("using mode specified in @mode\n");
@@ -1214,10 +1228,50 @@ static int __devinit install_fb(struct fb_info *info)
default:
pr_debug("rc = %d\n", rc);
pr_debug("failed to find mode\n");
- return -EINVAL;
+ /*
+ * For plane 0 we continue and look into
+ * driver's internal modedb.
+ */
+ if (mfbi->index == 0 && mfbi->edid_data)
+ has_default_mode = 0;
+ else
+ return -EINVAL;
break;
}
+ if (!has_default_mode) {
+ rc = fb_find_mode(&info->var, info, aoi_mode, fsl_diu_mode_db,
+ ARRAY_SIZE(fsl_diu_mode_db),
+ &fsl_diu_default_mode,
+ default_bpp);
+ if (rc > 0 && rc < 5)
+ has_default_mode = 1;
+ }
+
+ /* Still not found, use preferred mode from database if any */
+ if (!has_default_mode && info->monspecs.modedb) {
+ struct fb_monspecs *specs = &info->monspecs;
+ struct fb_videomode *modedb = &specs->modedb[0];
+
+ /*
+ * Get preferred timing. If not found,
+ * first mode in database will be used.
+ */
+ if (specs->misc & FB_MISC_1ST_DETAIL) {
+ int i;
+
+ for (i = 0; i < specs->modedb_len; i++) {
+ if (specs->modedb[i].flag & FB_MODE_IS_FIRST) {
+ modedb = &specs->modedb[i];
+ break;
+ }
+ }
+ }
+
+ info->var.bits_per_pixel = default_bpp;
+ fb_videomode_to_var(&info->var, modedb);
+ }
+
pr_debug("xres_virtual %d\n", info->var.xres_virtual);
pr_debug("bits_per_pixel %d\n", info->var.bits_per_pixel);
@@ -1256,6 +1310,9 @@ static void uninstall_fb(struct fb_info *info)
if (!mfbi->registered)
return;
+ if (mfbi->index == 0)
+ kfree(mfbi->edid_data);
+
unregister_framebuffer(info);
unmap_video_memory(info);
if (&info->cmap)
@@ -1456,6 +1513,17 @@ static int __devinit fsl_diu_probe(struct of_device *ofdev,
mfbi = machine_data->fsl_diu_info[i]->par;
memcpy(mfbi, &mfb_template[i], sizeof(struct mfb_info));
mfbi->parent = machine_data;
+
+ if (mfbi->index == 0) {
+ const u8 *prop;
+ int len;
+
+ /* Get EDID */
+ prop = of_get_property(np, "edid", &len);
+ if (prop && len == EDID_LENGTH)
+ mfbi->edid_data = kmemdup(prop, EDID_LENGTH,
+ GFP_KERNEL);
+ }
}
ret = of_address_to_resource(np, 0, &res);
--
1.7.0.4
More information about the devicetree-discuss
mailing list