[PATCH net-next v3 2/3] can: mscan-mpc5xxx: add support for the MPC512x processor

Wolfram Sang w.sang at pengutronix.de
Fri Jan 8 03:21:13 EST 2010


On Thu, Jan 07, 2010 at 03:10:20PM +0100, Wolfgang Grandegger wrote:
> From: Wolfgang Grandegger <wg at denx.de>
> 
> The main differences compared to the MSCAN on the MPC5200 are:
> 
> - More flexibility in choosing the CAN source clock and frequency:
> 
>   Three different clock sources can be selected: "ip", "ref" or "sys".
>   For the latter two, a clock divider can be defined as well. If the
>   clock source is not specified by the device tree, we first try to
>   find an optimal CAN source clock based on the system clock. If that
>   is not possible, the reference clock will be used.
> 
> - The behavior of bus-off recovery is configurable:
> 
>   To comply with the usual handling of Socket-CAN bus-off recovery,
>   "recovery on request" is selected (instead of automatic recovery).
> 
> Note that only MPC5121 Rev. 2 and later is supported.
> 
> Signed-off-by: Wolfgang Grandegger <wg at denx.de>

Reviewed-by: Wolfram Sang <w.sang at pengutronix.de>

It still works with our board and I didn't find anything else to comment on.

Thanks, Wolfgang!

-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 197 bytes
Desc: Digital signature
URL: <http://lists.ozlabs.org/pipermail/devicetree-discuss/attachments/20100107/aabe3e33/attachment.pgp>


More information about the devicetree-discuss mailing list