[PATCH net-next v2 3/3] powerpc/mpc5xxx: add OF platform binding doc for FSL MSCAN devices
Wolfgang Grandegger
wg at grandegger.com
Wed Jan 6 06:19:29 EST 2010
From: Wolfgang Grandegger <wg at denx.de>
This patch adds documentation for the MSCAN OF device bindings for
the MPC512x and moves the one for the MPC5200 to the new common file
"Documentation/powerpc/dts-bindings/fsl/can.txt".
Signed-off-by: Wolfgang Grandegger <wg at denx.de>
Acked-by: Wolfram Sang <w.sang at pengutronix.de>
---
Documentation/powerpc/dts-bindings/fsl/can.txt | 53 ++++++++++++++++++++
Documentation/powerpc/dts-bindings/fsl/mpc5200.txt | 9 +---
2 files changed, 54 insertions(+), 8 deletions(-)
create mode 100644 Documentation/powerpc/dts-bindings/fsl/can.txt
diff --git a/Documentation/powerpc/dts-bindings/fsl/can.txt b/Documentation/powerpc/dts-bindings/fsl/can.txt
new file mode 100644
index 0000000..2fa4fcd
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/fsl/can.txt
@@ -0,0 +1,53 @@
+CAN Device Tree Bindings
+------------------------
+
+(c) 2006-2009 Secret Lab Technologies Ltd
+Grant Likely <grant.likely at secretlab.ca>
+
+fsl,mpc5200-mscan nodes
+-----------------------
+In addition to the required compatible-, reg- and interrupt-properties, you can
+also specify which clock source shall be used for the controller:
+
+- fsl,mscan-clock-source : a string describing the clock source. Valid values
+ are: "ip" for ip bus clock
+ "ref" for reference clock (XTAL)
+ "ref" is default in case this property is not
+ present.
+
+fsl,mpc5121-mscan nodes
+-----------------------
+In addition to the required compatible-, reg- and interrupt-properties, you can
+also specify which clock source and divider shall be used for the controller:
+
+- fsl,mscan-clock-source : a string describing the clock source. Valid values
+ are: "ip" for ip bus clock
+ "ref" for reference clock
+ "sys" for system clock
+ If this property is not present, an optimal CAN
+ clock source and frequency based on the system
+ clock will be selected. If this is not possible,
+ the reference clock will be used.
+
+- fsl,mscan-clock-divider: for the reference and system clock, an additional
+ clock divider can be specified. By default, a
+ value of 1 is used.
+
+Note that the MPC5121 Rev. 1 processor is not supported.
+
+Examples:
+ can at 1300 {
+ compatible = "fsl,mpc5121-mscan";
+ interrupts = <12 0x8>;
+ interrupt-parent = <&ipic>;
+ reg = <0x1300 0x80>;
+ };
+
+ can at 1380 {
+ compatible = "fsl,mpc5121-mscan";
+ interrupts = <13 0x8>;
+ interrupt-parent = <&ipic>;
+ reg = <0x1380 0x80>;
+ fsl,mscan-clock-source = "ref";
+ fsl,mscan-clock-divider = <3>;
+ };
diff --git a/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
index cabc780..95accfa 100644
--- a/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
@@ -180,11 +180,4 @@ External interrupts:
fsl,mpc5200-mscan nodes
-----------------------
-In addition to the required compatible-, reg- and interrupt-properites, you can
-also specify which clock source shall be used for the controller:
-
-- fsl,mscan-clock-source- a string describing the clock source. Valid values
- are: "ip" for ip bus clock
- "ref" for reference clock (XTAL)
- "ref" is default in case this property is not
- present.
+See file can.txt in this directory.
--
1.6.2.5
More information about the devicetree-discuss
mailing list