[PATCH net-next 2/3] can: mscan-mpc5xxx: add support for the MPC521x processor
Wolfgang Grandegger
wg at grandegger.com
Mon Jan 4 23:49:10 EST 2010
Wolfgang Grandegger wrote:
> Wolfram Sang wrote:
>> On Sat, Jan 02, 2010 at 09:17:53AM +0100, Wolfgang Grandegger wrote:
>>> From: Wolfgang Grandegger <wg at denx.de>
>>>
>>> The main differences compared to the MSCAN on the MPC5200 are:
>>>
>>> - More flexibility in choosing the CAN source clock and frequency:
>>>
>>> Three different clock sources can be selected: "ip", "ref" or "sys".
>>> For the latter two, a clock divider can be defined as well. If the
>>> clock source is not specified by the device tree, we first try to
>>> find an optimal CAN source clock based on the system clock. If that
>>> is not possible, the reference clock will be used.
>>>
>>> - The behavior of bus-off recovery is configurable:
>>>
>>> To comply with the usual handling of Socket-CAN bus-off recovery,
>>> "recovery on request" is selected (instead of automatic recovery).
>>>
>>> Signed-off-by: Wolfgang Grandegger <wg at denx.de>
>>> ---
>>> drivers/net/can/mscan/Kconfig | 2 +-
>>> drivers/net/can/mscan/mpc5xxx_can.c | 234 +++++++++++++++++++++++++++++------
>>> drivers/net/can/mscan/mscan.c | 41 +++++--
>>> drivers/net/can/mscan/mscan.h | 81 ++++++------
>>> 4 files changed, 271 insertions(+), 87 deletions(-)
>>>
> [snip]
>
>>> +#else /* !CONFIG_PPC_MPC5200 */
>>> +static u32 __devinit mpc52xx_can_get_clock(struct of_device *ofdev,
>>> + const char *clock_name,
>>> + int *mscan_clksrc)
>>> +{
>>> + return 0;
>>> +}
>>> +#endif /* CONFIG_PPC_MPC5200 */
>> Hmmm, I don't really like those empty functions. I once used the data-field of
>> struct of_device_id, which carried a function pointer to a specific
>> init-function for the matched device. What do you think about such an approach?
>
> Often the problem is that the function will not compile on the other MPC
> arch. This is not true here. So, the main reason for the #ifdefs is
> space saving. Your approach will not help in both cases.
>
>>> +
>>> +#ifdef CONFIG_PPC_MPC512x
>>> +struct mpc512x_clockctl {
>>> + u32 spmr; /* System PLL Mode Reg */
>>> + u32 sccr[2]; /* System Clk Ctrl Reg 1 & 2 */
>>> + u32 scfr1; /* System Clk Freq Reg 1 */
>>> + u32 scfr2; /* System Clk Freq Reg 2 */
>>> + u32 reserved;
>>> + u32 bcr; /* Bread Crumb Reg */
>>> + u32 pccr[12]; /* PSC Clk Ctrl Reg 0-11 */
>>> + u32 spccr; /* SPDIF Clk Ctrl Reg */
>>> + u32 cccr; /* CFM Clk Ctrl Reg */
>>> + u32 dccr; /* DIU Clk Cnfg Reg */
>>> + u32 mccr[4]; /* MSCAN Clk Ctrl Reg 1-3 */
>>> +};
>>> +
>>> +static struct of_device_id mpc512x_clock_ids[] __devinitdata = {
>>> + { .compatible = "fsl,mpc5121-clock", },
>>> + {}
>>> +};
>>> +
>>> +static u32 __devinit mpc512x_can_get_clock(struct of_device *ofdev,
>>> + const char *clock_name,
>>> + int *mscan_clksrc,
>>> + ssize_t mscan_addr)
>>> +{
>>> + struct mpc512x_clockctl __iomem *clockctl;
>>> + struct device_node *np_clock;
>>> + struct clk *sys_clk, *ref_clk;
>>> + int plen, clockidx, clocksrc = -1;
>>> + u32 sys_freq, val, clockdiv = 1, freq = 0;
>>> + const u32 *pval;
>>> +
>>> + np_clock = of_find_matching_node(NULL, mpc512x_clock_ids);
>>> + if (!np_clock) {
>>> + dev_err(&ofdev->dev, "couldn't find clock node\n");
>>> + return -ENODEV;
>>> + }
>>> + clockctl = of_iomap(np_clock, 0);
>>> + if (!clockctl) {
>>> + dev_err(&ofdev->dev, "couldn't map clock registers\n");
>>> + return 0;
>>> + }
>>> +
>>> + /* Determine the MSCAN device index from the physical address */
>>> + clockidx = (mscan_addr & 0x80) ? 1 : 0;
>>> + if (mscan_addr & 0x2000)
>>> + clockidx += 2;
>> The PSCs use 'cell-index', here we use mscan_addr to derive the index. This is
>> not consistent, but should be IMHO. Now, which is the preferred way? I think
>> I'd go for 'cell-index', as other processors might have mscan_addr shuffled.
>> Also, we could use 'of_iomap' again in the probe_routine.
>
> I understood that "cell-index" is deprecated and it has been removed
> from many nodes. That's why I used the address to derive the index.
So more thoughts: I still find inspecting the regs less error prune than
defining cell-index and it should work fine for "fsl,mpc5121_mscan".
Other processor variants might handle a different register layout with
another appropriate compatibility string. But I could retrieve the
"regs" property inside mpc512x_can_get_clock() to use of_iomap() as before.
Wolfgang.
More information about the devicetree-discuss
mailing list