[PATCH v5 3/3] powerpc: doc/dts-bindings: update doc of FSL I2C bindings

[Wolfgang Grandegger]

From: Wolfgang Grandegger <wg at denx.de>

This patch adds the MPC5121 to the list of supported devices,
enhances the doc of the "clock-frequency" property and removes
the obsolete "cell-index" property from the example nodes.
Furthermore and example for the MPC5121 has been added.

Signed-off-by: Wolfgang Grandegger <wg at denx.de>
Reviewed-by: Wolfram Sang <w.sang at pengutronix.de>
---
 Documentation/powerpc/dts-bindings/fsl/i2c.txt |   30 +++++++++++++++++++----
 1 files changed, 24 insertions(+), 6 deletions(-)

diff --git a/Documentation/powerpc/dts-bindings/fsl/i2c.txt b/Documentation/powerpc/dts-bindings/fsl/i2c.txt
index b6d2e21..2f62dae 100644
--- a/Documentation/powerpc/dts-bindings/fsl/i2c.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/i2c.txt
@@ -9,8 +9,9 @@ Recommended properties :
 
  - compatible : compatibility list with 2 entries, the first should
    be "fsl,CHIP-i2c" where CHIP is the name of a compatible processor,
-   e.g. mpc8313, mpc8543, mpc8544, mpc5200 or mpc5200b. The second one
-   should be "fsl-i2c".
+   e.g. mpc8313, mpc8543, mpc8544, mpc5121, mpc5200 or mpc5200b. The
+   second one should be "fsl-i2c". For the mpc5121, an additional node
+   "fsl,mpc5121-i2c-ctrl" is required as shown in the example below.
  - interrupts : <a b> where a is the interrupt number and b is a
    field that represents an encoding of the sense and level
    information for the interrupt.  This should be encoded based on
@@ -20,29 +21,46 @@ Recommended properties :
    services interrupts for this device.
  - fsl,preserve-clocking : boolean; if defined, the clock settings
    from the bootloader are preserved (not touched).
- - clock-frequency : desired I2C bus clock frequency in Hz.
+ - clock-frequency : desired I2C bus clock frequency in Hz.  If this
+   property and "fsl,preserve-clocking" is not defined, a safe fixed
+   clock divider value is used (resulting in a small clock frequency).
 
 Examples :
 
+	/* MPC5121 based board */
+	i2c at 1740 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+		reg = <0x1740 0x20>;
+		interrupts = <11 0x8>;
+		interrupt-parent = <&ipic>;
+		clock-frequency = <100000>;
+	};
+
+	i2ccontrol at 1760 {
+		compatible = "fsl,mpc5121-i2c-ctrl";
+		reg = <0x1760 0x8>;
+	};
+
+	/* MPC5200B based board */
 	i2c at 3d00 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-		cell-index = <0>;
 		reg = <0x3d00 0x40>;
 		interrupts = <2 15 0>;
 		interrupt-parent = <&mpc5200_pic>;
 		fsl,preserve-clocking;
 	};
 
+	/* MPC8544 base board */
 	i2c at 3100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		cell-index = <1>;
 		compatible = "fsl,mpc8544-i2c", "fsl-i2c";
 		reg = <0x3100 0x100>;
 		interrupts = <43 2>;
 		interrupt-parent = <&mpic>;
 		clock-frequency = <400000>;
 	};
-
-- 
1.6.2.5