[RFC PATCH 08/14] ARM: versatile-i2c driver DT port

[Lorenzo Pieralisi]

When OF is enabled, each driver should define a match table to
allow the kernel to recognise drivers suitable for a given device.
Initialization is carried out through a static inline at driver init
time. The match-table is declared following OF bindings.

This patch adds the required initialization call to the versatile-i2c
driver.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
---
 drivers/i2c/busses/i2c-versatile.c |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/drivers/i2c/busses/i2c-versatile.c b/drivers/i2c/busses/i2c-versatile.c
index 6055601..ea8e3b5 100644
--- a/drivers/i2c/busses/i2c-versatile.c
+++ b/drivers/i2c/busses/i2c-versatile.c
@@ -133,6 +133,11 @@ static int i2c_versatile_remove(struct platform_device *dev)
 	return 0;
 }
 
+static struct of_device_id versatile_i2c_matches[] = {
+	{ .compatible = "arm,versatile-i2c"},
+	{},
+};
+
 static struct platform_driver i2c_versatile_driver = {
 	.probe		= i2c_versatile_probe,
 	.remove		= i2c_versatile_remove,
@@ -144,6 +149,7 @@ static struct platform_driver i2c_versatile_driver = {
 
 static int __init i2c_versatile_init(void)
 {
+	platform_init_match(&i2c_versatile_driver, versatile_i2c_matches);
 	return platform_driver_register(&i2c_versatile_driver);
 }
 
-- 
1.6.3.3