[PATCH 1/5] fsl-diu-fb: fix issue with re-enabling DIU area descriptor on MPC5121
Anatolij Gustschin
agust at denx.de
Fri Apr 30 09:49:34 EST 2010
On MPC5121 re-configuring the DIU area descriptor by writing
new descriptor address doesn't work. As a result, DIU continues
to display using old area descriptor even if the new one has
been set.
Disabling the DIU before setting the new descriptor and
subsequently enabling it fixes the problem.
Signed-off-by: Anatolij Gustschin <agust at denx.de>
---
drivers/video/fsl-diu-fb.c | 5 ++++-
1 files changed, 4 insertions(+), 1 deletions(-)
diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c
index 994358a..ee15a99 100644
--- a/drivers/video/fsl-diu-fb.c
+++ b/drivers/video/fsl-diu-fb.c
@@ -329,8 +329,11 @@ static int fsl_diu_enable_panel(struct fb_info *info)
if (mfbi->type != MFB_TYPE_OFF) {
switch (mfbi->index) {
case 0: /* plane 0 */
- if (hw->desc[0] != ad->paddr)
+ if (hw->desc[0] != ad->paddr) {
+ out_be32(&dr.diu_reg->diu_mode, MFB_MODE0);
out_be32(&hw->desc[0], ad->paddr);
+ out_be32(&dr.diu_reg->diu_mode, MFB_MODE1);
+ }
break;
case 1: /* plane 1 AOI 0 */
cmfbi = machine_data->fsl_diu_info[2]->par;
--
1.6.3.3
More information about the devicetree-discuss
mailing list