[PATCH] sdhci: Add support for hosts that are only capable of 1-bit transfers

[Grant Likely]

On Thu, Jun 11, 2009 at 2:15 PM, Anton
Vorontsov<avorontsov at ru.mvista.com> wrote:
> Some hosts (hardware configurations, or particular SD/MMC slots) may
> not support 4-bit bus. For example, on MPC8569E-MDS boards we can
> switch between serial (1-bit only) and nibble (4-bit) modes, thought
> we have to disable more peripherals to work in 4-bit mode.
>
> Along with some small core changes, this patch modifies sdhci-of
> driver, so that now it looks for "mode" property in the device-tree.
>
> Signed-off-by: Anton Vorontsov <avorontsov at ru.mvista.com>
> ---
>
> Pierre, I'm not sure if a quirk would be appropriate here. If so,
> I can redo the patch with FORCE_1_BIT_DATA quirk.
>
> Thanks,
>
>  Documentation/powerpc/dts-bindings/fsl/esdhc.txt |    2 ++
>  drivers/mmc/host/sdhci-of.c                      |    7 +++++++
>  drivers/mmc/host/sdhci-pci.c                     |    1 +
>  drivers/mmc/host/sdhci.c                         |    2 +-
>  4 files changed, 11 insertions(+), 1 deletions(-)
>
> diff --git a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
> index 5093ddf..298b865 100644
> --- a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
> +++ b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
> @@ -10,6 +10,8 @@ Required properties:
>   - interrupts : should contain eSDHC interrupt.
>   - interrupt-parent : interrupt source phandle.
>   - clock-frequency : specifies eSDHC base clock frequency.
> +  - mode : specifies eSDHC mode, valid values are: "1-bit" and "4-bit".
> +    If mode is unspecified, then 4-bit mode is assumed.

In light of Pierre's comment that 4-bit is mandatory and this is a
deviation, perhaps it would be better to define an empty property to
indicate that only 1-bit transfers work.  Maybe something along the
lines of "sdhc-1-bit-only"?

g.

-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.