[PATCH V2 2/2] mtd/maps/mtd-ram: add an of-platform driver

[Albrecht Dreß]

Am 08.06.09 18:35 schrieb(en) Wolfram Sang:
>> Question: why is bank-width even relevant for a RAM device?
> 
> The underlying map_ram-driver uses it once while erasing. The  
> question remains if this is really needed?

Am 06.06.09 18:16 schrieb(en) Albrecht Dreß:
> At least if the RAM is attached to the 5200's Local Plus Bus in  
> 16-bit mode, no byte write accesses are allowed (byte /reads/ work,  
> though).  I have a tweak (which I will post next week) to address  
> this case, which depends upon this setting.

To put this clearer: on '5200 based systems, the driver (more specific:  
the function inline_map_copy_to()) *must* know whether the hardware is  
connected in 8-bit or 16-bit mode to the Local Plus Bus, as byte writes  
(issued by memcpy_toio()) will fail for the latter setup (probably the  
same applies for byte and word writes in 32-bit mode).

IMHO, this information should be passed using the device tree.  The  
"bank-width" seems to be an obvious choice for that.

Best, Albrecht.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
URL: <http://lists.ozlabs.org/pipermail/devicetree-discuss/attachments/20090608/d998bc83/attachment.pgp>