[PATCH 11/11] arm/versatile: probe via device tree

Jeremy Kerr jeremy.kerr at canonical.com
Tue Dec 22 21:54:56 EST 2009


For testing the dt work, define a dt-enabled versatile platform,
separate from the existing versatile platform support.

Signed-off-by: Jeremy Kerr <jeremy.kerr at canonical.com>

---
 arch/arm/mach-versatile/Kconfig        |    7 +
 arch/arm/mach-versatile/Makefile       |    1 
 arch/arm/mach-versatile/versatile_dt.c |  129 +++++++++++++++++++++++++
 3 files changed, 137 insertions(+)

diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig
index c781f30..9e8f4a9 100644
--- a/arch/arm/mach-versatile/Kconfig
+++ b/arch/arm/mach-versatile/Kconfig
@@ -14,4 +14,11 @@ config MACH_VERSATILE_AB
 	help
 	  Include support for the ARM(R) Versatile/AP platform.
 
+config MACH_VERSATILE_DT
+	bool "Support Versatile platform from device tree"
+	depends on ARM_DEVTREE
+	help
+	  Include support for the ARM(R) Versatile/PB platform,
+	  using the device tree for discovery
+
 endmenu
diff --git a/arch/arm/mach-versatile/Makefile b/arch/arm/mach-versatile/Makefile
index ba81e70..07d0701 100644
--- a/arch/arm/mach-versatile/Makefile
+++ b/arch/arm/mach-versatile/Makefile
@@ -5,4 +5,5 @@
 obj-y					:= core.o clock.o
 obj-$(CONFIG_ARCH_VERSATILE_PB)		+= versatile_pb.o
 obj-$(CONFIG_MACH_VERSATILE_AB)		+= versatile_ab.o
+obj-$(CONFIG_MACH_VERSATILE_DT)		+= versatile_dt.o
 obj-$(CONFIG_PCI)			+= pci.o
diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c
new file mode 100644
index 0000000..45c95a2
--- /dev/null
+++ b/arch/arm/mach-versatile/versatile_dt.c
@@ -0,0 +1,129 @@
+/*
+ *  linux/arch/arm/mach-versatile/versatile_dt.c
+ *
+ *  Copyright (C) 2009 Canonical Ltd.
+ *  Copyright (C) 2004 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/sysdev.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+
+#include "core.h"
+
+#if 1
+#define IRQ_MMCI1A	IRQ_VICSOURCE23
+#else
+#define IRQ_MMCI1A	IRQ_SIC_MMCI1A
+#endif
+
+static struct mmci_platform_data mmc1_plat_data = {
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.status		= mmc_status,
+	.gpio_wp	= -1,
+	.gpio_cd	= -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+	.gpio_base	= 16,
+	.irq_base	= IRQ_GPIO2_START,
+};
+
+static struct pl061_platform_data gpio3_plat_data = {
+	.gpio_base	= 24,
+	.irq_base	= IRQ_GPIO3_START,
+};
+
+#define UART3_IRQ	{ IRQ_SIC_UART3, NO_IRQ }
+#define UART3_DMA	{ 0x86, 0x87 }
+#define SCI1_IRQ	{ IRQ_SIC_SCI3, NO_IRQ }
+#define SCI1_DMA	{ 0x88, 0x89 }
+#define MMCI1_IRQ	{ IRQ_MMCI1A, IRQ_SIC_MMCI1B }
+#define MMCI1_DMA	{ 0x85, 0 }
+
+/*
+ * These devices are connected via the core APB bridge
+ */
+#define GPIO2_IRQ	{ IRQ_GPIOINT2, NO_IRQ }
+#define GPIO2_DMA	{ 0, 0 }
+#define GPIO3_IRQ	{ IRQ_GPIOINT3, NO_IRQ }
+#define GPIO3_DMA	{ 0, 0 }
+
+/*
+ * These devices are connected via the DMA APB bridge
+ */
+
+/* FPGA Primecells */
+AMBA_DEVICE(uart3, "fpga:09", UART3,    NULL);
+AMBA_DEVICE(sci1,  "fpga:0a", SCI1,     NULL);
+AMBA_DEVICE(mmc1,  "fpga:0b", MMCI1,    &mmc1_plat_data);
+
+/* DevChip Primecells */
+AMBA_DEVICE(gpio2, "dev:e6",  GPIO2,    &gpio2_plat_data);
+AMBA_DEVICE(gpio3, "dev:e7",  GPIO3,    &gpio3_plat_data);
+
+static struct amba_device *amba_devs[] __initdata = {
+	&uart3_device,
+	&gpio2_device,
+	&gpio3_device,
+	&sci1_device,
+	&mmc1_device,
+};
+
+static void __init versatile_dt_init(void)
+{
+	int i;
+
+	versatile_init();
+
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+		struct amba_device *d = amba_devs[i];
+		amba_device_register(d, &iomem_resource);
+	}
+}
+static int __init versatile_dt_probe(unsigned long dt)
+{
+	if (!of_flat_dt_is_compatible(dt, "arm,versatile"))
+		return 0;
+
+	return 1;
+}
+
+DT_MACHINE_START(VERSATILE_PB, "ARM-Versatile PB")
+	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
+	.phys_io	= 0x101f1000,
+	.io_pg_offst	= ((0xf11f1000) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.map_io		= versatile_map_io,
+	.init_irq	= versatile_init_irq,
+	.timer		= &versatile_timer,
+	.init_machine	= versatile_dt_init,
+	.probe_dt	= versatile_dt_probe,
+MACHINE_END


More information about the devicetree-discuss mailing list