[PATCH 3/8] powerpc/85xx: Add support for the "socrates" board (MPC8544).

[Wolfgang Grandegger]

Hi Grant,

Grant Likely wrote:
> On Tue, Mar 31, 2009 at 6:37 AM, Wolfgang Grandegger <wg at grandegger.com> wrote:
>> Supported are Ethernet, serial console, I2C, I2C-based RTC and
>> temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
>> display controller.
>>
>> The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
>> supported through our own fpga_pic interrupt controller driver.
>>
>> For example the SJA1000 controller is level low sensitive connected to
>> fpga_pic line 2 and is routed to the second (of three) irq lines to
>> the CPU:
>>
>>    can at 3,100 {
>>            compatible = "philips,sja1000";
>>            reg = <3 0x100 0x80>;
>>            interrupts = <2 2>;
>>            interrupts = <2 8 1>;   // number, type, routing
>>            interrupt-parent = <&fpga_pic>;
>>    };
>>
>> Signed-off-by: Sergei Poselenov <sposelenov at emcraft.com>
>> Signed-off-by: Yuri Tikhonov <yur at emcraft.com>
>> Signed-off-by: Ilya Yanok <yanok at emcraft.com>
>> Signed-off-by: Wolfgang Grandegger <wg at grandegger.com>
>> Signed-off-by: Anatolij Gustschin <agust at denx.de>
>> Signed-off-by: Dmitry Rakhchev <rda at emcraft.com>
>> ---
>>  arch/powerpc/boot/dts/socrates.dts              |  338 +++++
>>  arch/powerpc/configs/85xx/socrates_defconfig    | 1410 ++++++++++++++++++++++++
> 
> I always ask this question: Do you really need a board specific
> defconfig file?  We are multiplatform now.
> 
>>  arch/powerpc/platforms/85xx/Kconfig             |    6
>>  arch/powerpc/platforms/85xx/Makefile            |    1
>>  arch/powerpc/platforms/85xx/socrates.c          |  133 ++
>>  arch/powerpc/platforms/85xx/socrates_fpga_pic.c |  327 +++++
>>  arch/powerpc/platforms/85xx/socrates_fpga_pic.h |   16
> 
> socrates_fpga_pic is only ever going to be used by socrates.c.  I'd
> roll the two socrates.c files into one and eliminate the header file.
> 
>> Index: linux-2.6/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
>> ===================================================================
>> --- /dev/null
>> +++ linux-2.6/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
> [...]
>> +struct socrates_fpga_irq_info {
>> +       unsigned int irq_line;
>> +       int type;
>> +};
>> +
>> +/*
>> + * Interrupt routing and type table
>> + *
>> + * IRQ_TYPE_NONE means the interrupt type is configurable,
>> + * otherwise it's fixed to the specified value.
>> + */
>> +static struct socrates_fpga_irq_info fpga_irqs[SOCRATES_FPGA_NUM_IRQS] = {
>> +       [0] = {0, IRQ_TYPE_NONE},
>> +       [1] = {0, IRQ_TYPE_LEVEL_HIGH},
>> +       [2] = {0, IRQ_TYPE_LEVEL_LOW},
>> +       [3] = {0, IRQ_TYPE_NONE},
>> +       [4] = {0, IRQ_TYPE_NONE},
>> +       [5] = {0, IRQ_TYPE_NONE},
>> +       [6] = {0, IRQ_TYPE_NONE},
>> +       [7] = {0, IRQ_TYPE_NONE},
>> +       [8] = {0, IRQ_TYPE_LEVEL_HIGH},
>> +};
> 
> It is good practice to use named elements in initializers: {.type =
> IRQ_TYPE_LEVEL_HIGH},
> 
> Static variables are initialized to zero.  Everything that is 0 can be
> dropped from this initializer (lines 0 and 3-7, and the irq_line
> field).

Right, missed that.

This is one of the patches I sent accidentally. I think Kumar already
applied it to his tree.

Sorry for the noise.

Wolfgang.