[PATCH] ndfc driver

[Sean MacLennan]

On Thu, 4 Dec 2008 09:01:07 -0500
"Josh Boyer" <jwboyer at linux.vnet.ibm.com> wrote:

> In addition to an example DTS patch (probably to warp itself), could
> you briefly write up a binding and put it in
> Documentation/powerpc/dts-bindings/amcc (or similar)?  Also please CC
> the devicetree-discuss list on that part.

Here is a start at the doc. I have sent it as a patch, but could just
as easily send raw text.

The example comes from the warp dts, just with less partitions, so I
have not included a warp dts patch here.

Cheers,
   Sean

diff --git a/Documentation/powerpc/dts-bindings/amcc/ndfc.txt
b/Documentation/powerpc/dts-bindings/amcc/ndfc.txt new file mode 100644
index 0000000..668f4a9
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/amcc/ndfc.txt
@@ -0,0 +1,31 @@
+AMCC NDFC (NanD Flash Controller)
+
+Required properties:
+- compatible : "amcc,ndfc".
+- reg : should specify chip select and size used for the chip (0x2000).
+
+Optional properties:
+- ccr : NDFC config and control register value (default 0).
+- bank-settings : NDFC bank configuration register value (default 0).
+- partition(s) - follows the OF MTD standard for partitions
+
+Example:
+
+nand at 1,0 {
+	compatible = "amcc,ndfc";
+	reg = <0x00000001 0x00000000 0x00002000>;
+	ccr = <0x00001000>;
+	bank-settings = <0x80002222>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	partition at 0 {
+		label = "kernel";
+		reg = <0x00000000 0x00200000>;
+	};
+	partition at 200000 {
+		label = "root";
+		reg = <0x00200000 0x03E00000>;
+	};
+};
+