[Cbe-oss-dev] [PATCH v2 08/17] powerpc/powerpc: Add new PCIe functions for allocating cxl interrupts
Michael Neuling
mikey at neuling.org
Thu Oct 2 16:09:56 EST 2014
On Thu, 2014-10-02 at 13:16 +1000, Michael Ellerman wrote:
> On Tue, 2014-30-09 at 10:34:57 UTC, Michael Neuling wrote:
> > From: Ian Munsie <imunsie at au1.ibm.com>
> >
> > This adds a number of functions for allocating IRQs under powernv PCIe for cxl.
> >
> > diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
> > index 329164f..b0b96f0 100644
> > --- a/arch/powerpc/platforms/powernv/pci-ioda.c
> > +++ b/arch/powerpc/platforms/powernv/pci-ioda.c
> > @@ -503,6 +505,138 @@ static struct pnv_ioda_pe *pnv_ioda_get_pe(struct pci_dev *dev)
> > return NULL;
> > return &phb->ioda.pe_array[pdn->pe_number];
> > }
> > +
> > +struct device_node *pnv_pci_to_phb_node(struct pci_dev *dev)
> > +{
> > + struct pci_controller *hose = pci_bus_to_host(dev->bus);
> > +
> > + return hose->dn;
> > +}
> > +EXPORT_SYMBOL(pnv_pci_to_phb_node);
> > +
> > +#ifdef CONFIG_CXL_BASE
> > +int pnv_phb_to_cxl(struct pci_dev *dev)
> > +{
> > + struct pci_controller *hose = pci_bus_to_host(dev->bus);
> > + struct pnv_phb *phb = hose->private_data;
> > + struct pnv_ioda_pe *pe;
> > + int rc;
> > +
> > + if (!(pe = pnv_ioda_get_pe(dev))) {
> > + rc = -ENODEV;
> > + goto out;
> > + }
>
> That'd be a lot simpler as:
>
> pe = pnv_ioda_get_pe(dev);
> if (!pe)
> return -ENODEV;
OK
> > + pe_info(pe, "switch PHB to CXL\n");
> > + pe_info(pe, "PHB-ID : 0x%016llx\n", phb->opal_id);
> > + pe_info(pe, " pe : %i\n", pe->pe_number);
>
> Spacing is a bit weird but maybe it matches something else?
Actually, we switched this to pe_info() based on one of Gavin's reviews,
so the pe_number and opal_id being printed here are not needed anymore.
I'm simplifying this into one line.
pe_info(pe, "Switching PHB to CXL\n");
>
> > +
> > + if ((rc = opal_pci_set_phb_cxl_mode(phb->opal_id, 1, pe->pe_number)))
> > + dev_err(&dev->dev, "opal_pci_set_phb_cxl_mode failed: %i\n", rc);
>
> Again why not:
>
> rc = opal_pci_set_phb_cxl_mode(phb->opal_id, 1, pe->pe_number);
> if (rc)
> dev_err(&dev->dev, "opal_pci_set_phb_cxl_mode failed: %i\n", rc);
Ok.
> > +out:
> > + return rc;
> > +}
> > +EXPORT_SYMBOL(pnv_phb_to_cxl);
> > +
>
> > +int pnv_cxl_alloc_hwirq_ranges(struct cxl_irq_ranges *irqs,
> > + struct pci_dev *dev, int num)
>
> This could use some documentation.
>
> It seems to be that it allocates num irqs in some number of ranges, up to
> CXL_IRQ_RANGES?
OK
>
> > +{
> > + struct pci_controller *hose = pci_bus_to_host(dev->bus);
> > + struct pnv_phb *phb = hose->private_data;
> > + int range = 0;
>
> You reinitialise to 1 below?
Oops
>
> > + int hwirq;
> > + int try;
>
> So these can be:
>
> int hwirq, try, range;
>
> > + memset(irqs, 0, sizeof(struct cxl_irq_ranges));
> > +
> > + for (range = 1; range < CXL_IRQ_RANGES && num; range++) {
>
> I think this would be clearer if range was just called "i" as usual.
OK
> Why does it start at 1 ?
0 is used by the data storage interrupt. I'll add a comment to clarify.
>
> > + try = num;
> > + while (try) {
> > + hwirq = msi_bitmap_alloc_hwirqs(&phb->msi_bmp, try);
> > + if (hwirq >= 0)
> > + break;
> > + try /= 2;
> > + }
> > + if (!try)
> > + goto fail;
> > +
> > + irqs->offset[range] = phb->msi_base + hwirq;
> > + irqs->range[range] = try;
>
> irqs->range is irq_hw_number_t but looks like it should just be uint.
>
> > + pr_devel("cxl alloc irq range 0x%x: offset: 0x%lx limit: %li\n",
> > + range, irqs->offset[range], irqs->range[range]);
> > + num -= try;
> > + }
> > + if (num)
> > + goto fail;
> > +
> > + return 0;
> > +fail:
> > + for (range--; range >= 0; range--) {
> > + hwirq = irqs->offset[range] - phb->msi_base;
> > + msi_bitmap_free_hwirqs(&phb->msi_bmp, hwirq,
> > + irqs->range[range]);
> > + irqs->range[range] = 0;
> > + }
>
> Because you zero ranges at the top I think you can replace all of the fail
> logic with a call to pnv_cxl_release_hwirq_ranges().
Nice. Will change.
>
>
> > + return -ENOSPC;
> > +}
> > +EXPORT_SYMBOL(pnv_cxl_alloc_hwirq_ranges);
> > +
> > +void pnv_cxl_release_hwirq_ranges(struct cxl_irq_ranges *irqs,
> > + struct pci_dev *dev)
> > +{
> > + struct pci_controller *hose = pci_bus_to_host(dev->bus);
> > + struct pnv_phb *phb = hose->private_data;
> > + int range = 0;
>
> Unnecessary init again.
Yep. I'll change to 'i' too.
> > + int hwirq;
> > +
> > + for (range = 0; range < 4; range++) {
>
> Shouldn't 4 be CXL_IRQ_RANGES ?
Yep.
>
> > + hwirq = irqs->offset[range] - phb->msi_base;
>
> That should be inside the if.
Yep.
>
> Or better do:
> if (!irqs->range[range])
> continue;
> ...
Nice.
>
> > + if (irqs->range[range]) {
> > + pr_devel("cxl release irq range 0x%x: offset: 0x%lx limit: %ld\n",
> > + range, irqs->offset[range],
> > + irqs->range[range]);
> > + msi_bitmap_free_hwirqs(&phb->msi_bmp, hwirq,
> > + irqs->range[range]);
> > + }
> > + }
> > +}
> > +EXPORT_SYMBOL(pnv_cxl_release_hwirq_ranges);
> > +
> > +int pnv_cxl_get_irq_count(struct pci_dev *dev)
> > +{
> > + struct pci_controller *hose = pci_bus_to_host(dev->bus);
> > + struct pnv_phb *phb = hose->private_data;
>
> Indentation is fubar.
OK
>
> > + return phb->msi_bmp.irq_count;
> > +}
> > +EXPORT_SYMBOL(pnv_cxl_get_irq_count);
> > +
> > +#endif /* CONFIG_CXL_BASE */
> > #endif /* CONFIG_PCI_MSI */
> >
> > static int pnv_ioda_configure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
> > @@ -1330,6 +1464,33 @@ static void set_msi_irq_chip(struct pnv_phb *phb, unsigned int virq)
> > irq_set_chip(virq, &phb->ioda.irq_chip);
> > }
> >
> > +#ifdef CONFIG_CXL_BASE
>
> Why is this here and not in the previous #ifdef CONFIG_CXL_BASE block ?
I can actually move the rest of the cxl code down here too. So I'll do
that.
>
> > +int pnv_cxl_ioda_msi_setup(struct pci_dev *dev, unsigned int hwirq,
> > + unsigned int virq)
> > +{
> > + struct pci_controller *hose = pci_bus_to_host(dev->bus);
> > + struct pnv_phb *phb = hose->private_data;
> > + unsigned int xive_num = hwirq - phb->msi_base;
> > + struct pnv_ioda_pe *pe;
> > + int rc;
> > +
> > + if (!(pe = pnv_ioda_get_pe(dev)))
> > + return -ENODEV;
> > +
> > + /* Assign XIVE to PE */
> > + rc = opal_pci_set_xive_pe(phb->opal_id, pe->pe_number, xive_num);
> > + if (rc) {
> > + pr_warn("%s: OPAL error %d setting msi_base 0x%x hwirq 0x%x XIVE 0x%x PE\n",
> > + pci_name(dev), rc, phb->msi_base, hwirq, xive_num);
>
> dev_warn() ?
I'm going to move it to the pe_warn() we have here.
Cheers,
Mikey
More information about the cbe-oss-dev
mailing list