[Cbe-oss-dev] [PATCH] net/ps3: Fix gelic RX DMA restart
Geoff Levand
geoff at infradead.org
Fri Jul 15 03:15:26 EST 2011
Fix the condition where PS3 network RX hangs when no network
TX is occurring by calling gelic_card_enable_rxdmac() during
RX_DMA_CHAIN_END event processing.
The gelic hardware automatically clears its RX_DMA_EN flag when
it detects an RX_DMA_CHAIN_END event. In its processing of
RX_DMA_CHAIN_END the gelic driver is required to set RX_DMA_EN
(with a call to gelic_card_enable_rxdmac()) to restart RX DMA
transfers. The existing gelic driver code does not set
RX_DMA_EN directly in its processing of the RX_DMA_CHAIN_END
event, but uses a flag variable card->rx_dma_restart_required
to schedule the setting of RX_DMA_EN until next inside the
interrupt handler.
It seems this delayed setting of RX_DMA_EN causes the hang since
the next RX interrupt after the RX_DMA_CHAIN_END event where
RX_DMA_EN is scheduled to be set will not occur since RX_DMA_EN
was not set. In the case were network TX is occuring, RX_DMA_EN
is set in the next TX interrupt and RX processing continues.
Signed-off-by: Geoff Levand <geoff at infradead.org>
---
drivers/net/ps3_gelic_net.c | 21 ++++++++-------------
drivers/net/ps3_gelic_net.h | 1 -
2 files changed, 8 insertions(+), 14 deletions(-)
--- a/drivers/net/ps3_gelic_net.c
+++ b/drivers/net/ps3_gelic_net.c
@@ -986,10 +986,6 @@ static int gelic_card_decode_one_descr(s
int dmac_chain_ended;
status = gelic_descr_get_status(descr);
- /* is this descriptor terminated with next_descr == NULL? */
- dmac_chain_ended =
- be32_to_cpu(descr->dmac_cmd_status) &
- GELIC_DESCR_RX_DMA_CHAIN_END;
if (status == GELIC_DESCR_DMA_CARDOWNED)
return 0;
@@ -1052,6 +1048,11 @@ static int gelic_card_decode_one_descr(s
/* ok, we've got a packet in descr */
gelic_net_pass_skb_up(descr, card, netdev);
refill:
+
+ /* is the current descriptor terminated with next_descr == NULL? */
+ dmac_chain_ended =
+ be32_to_cpu(descr->dmac_cmd_status) &
+ GELIC_DESCR_RX_DMA_CHAIN_END;
/*
* So that always DMAC can see the end
* of the descriptor chain to avoid
@@ -1080,10 +1081,9 @@ refill:
* If dmac chain was met, DMAC stopped.
* thus re-enable it
*/
- if (dmac_chain_ended) {
- card->rx_dma_restart_required = 1;
- dev_dbg(ctodev(card), "reenable rx dma scheduled\n");
- }
+
+ if (dmac_chain_ended)
+ gelic_card_enable_rxdmac(card);
return 1;
}
@@ -1149,11 +1149,6 @@ static irqreturn_t gelic_card_interrupt(
status &= card->irq_mask;
- if (card->rx_dma_restart_required) {
- card->rx_dma_restart_required = 0;
- gelic_card_enable_rxdmac(card);
- }
-
if (status & GELIC_CARD_RXINT) {
gelic_card_rx_irq_off(card);
napi_schedule(&card->napi);
--- a/drivers/net/ps3_gelic_net.h
+++ b/drivers/net/ps3_gelic_net.h
@@ -289,7 +289,6 @@ struct gelic_card {
struct gelic_descr_chain tx_chain;
struct gelic_descr_chain rx_chain;
- int rx_dma_restart_required;
/*
* tx_lock guards tx descriptor list and
* tx_dma_progress.
More information about the cbe-oss-dev
mailing list