[Cbe-oss-dev] [patch 1/2] net/ps3: Cleanup gelic enums

Geoff Levand geoffrey.levand at am.sony.com
Wed Dec 2 09:15:53 EST 2009


Cleanup of the gelic driver enumerations:

 o Add some missing commas.
 o Add an Ether port post fix (PS3 currently only supports PORT_0).
 o Add a new enum gelic_lv1_phy to use when interacting with the PHY.

Signed-off-by: Geoff Levand <geoffrey.levand at am.sony.com>
---
Hi Jeff,

This patch does some cleanup needed by the 2nd patch
[patch 2/2] net/ps3: Add support for gelic link negotiation.

Please apply for 2.3.33.

-Geoff

 drivers/net/ps3_gelic_net.c |   26 +++++++++++++-------------
 drivers/net/ps3_gelic_net.h |   19 ++++++++++++-------
 2 files changed, 25 insertions(+), 20 deletions(-)

--- a/drivers/net/ps3_gelic_net.c
+++ b/drivers/net/ps3_gelic_net.c
@@ -95,11 +95,11 @@ static void gelic_card_get_ether_port_st
 
 	lv1_net_control(bus_id(card), dev_id(card),
 			GELIC_LV1_GET_ETH_PORT_STATUS,
-			GELIC_LV1_VLAN_TX_ETHERNET, 0, 0,
+			GELIC_LV1_VLAN_TX_ETHERNET_0, 0, 0,
 			&card->ether_port_status, &v2);
 
 	if (inform) {
-		ether_netdev = card->netdev[GELIC_PORT_ETHERNET];
+		ether_netdev = card->netdev[GELIC_PORT_ETHERNET_0];
 		if (card->ether_port_status & GELIC_LV1_ETHER_LINK_UP)
 			netif_carrier_on(ether_netdev);
 		else
@@ -451,14 +451,14 @@ static void gelic_descr_release_tx(struc
 
 static void gelic_card_stop_queues(struct gelic_card *card)
 {
-	netif_stop_queue(card->netdev[GELIC_PORT_ETHERNET]);
+	netif_stop_queue(card->netdev[GELIC_PORT_ETHERNET_0]);
 
 	if (card->netdev[GELIC_PORT_WIRELESS])
 		netif_stop_queue(card->netdev[GELIC_PORT_WIRELESS]);
 }
 static void gelic_card_wake_queues(struct gelic_card *card)
 {
-	netif_wake_queue(card->netdev[GELIC_PORT_ETHERNET]);
+	netif_wake_queue(card->netdev[GELIC_PORT_ETHERNET_0]);
 
 	if (card->netdev[GELIC_PORT_WIRELESS])
 		netif_wake_queue(card->netdev[GELIC_PORT_WIRELESS]);
@@ -999,7 +999,7 @@ static int gelic_card_decode_one_descr(s
 			goto refill;
 		}
 	} else
-		netdev = card->netdev[GELIC_PORT_ETHERNET];
+		netdev = card->netdev[GELIC_PORT_ETHERNET_0];
 
 	if ((status == GELIC_DESCR_DMA_RESPONSE_ERROR) ||
 	    (status == GELIC_DESCR_DMA_PROTECTION_ERROR) ||
@@ -1369,7 +1369,7 @@ static void gelic_net_tx_timeout_task(st
 {
 	struct gelic_card *card =
 		container_of(work, struct gelic_card, tx_timeout_task);
-	struct net_device *netdev = card->netdev[GELIC_PORT_ETHERNET];
+	struct net_device *netdev = card->netdev[GELIC_PORT_ETHERNET_0];
 
 	dev_info(ctodev(card), "%s:Timed out. Restarting... \n", __func__);
 
@@ -1531,10 +1531,10 @@ static struct gelic_card * __devinit gel
 	/* gelic_port */
 	port->netdev = *netdev;
 	port->card = card;
-	port->type = GELIC_PORT_ETHERNET;
+	port->type = GELIC_PORT_ETHERNET_0;
 
 	/* gelic_card */
-	card->netdev[GELIC_PORT_ETHERNET] = *netdev;
+	card->netdev[GELIC_PORT_ETHERNET_0] = *netdev;
 
 	INIT_WORK(&card->tx_timeout_task, gelic_net_tx_timeout_task);
 	init_waitqueue_head(&card->waitq);
@@ -1554,9 +1554,9 @@ static void __devinit gelic_card_get_vla
 		int tx;
 		int rx;
 	} vlan_id_ix[2] = {
-		[GELIC_PORT_ETHERNET] = {
-			.tx = GELIC_LV1_VLAN_TX_ETHERNET,
-			.rx = GELIC_LV1_VLAN_RX_ETHERNET
+		[GELIC_PORT_ETHERNET_0] = {
+			.tx = GELIC_LV1_VLAN_TX_ETHERNET_0,
+			.rx = GELIC_LV1_VLAN_RX_ETHERNET_0
 		},
 		[GELIC_PORT_WIRELESS] = {
 			.tx = GELIC_LV1_VLAN_TX_WIRELESS,
@@ -1601,7 +1601,7 @@ static void __devinit gelic_card_get_vla
 			i, card->vlan[i].tx, card->vlan[i].rx);
 	}
 
-	if (card->vlan[GELIC_PORT_ETHERNET].tx) {
+	if (card->vlan[GELIC_PORT_ETHERNET_0].tx) {
 		BUG_ON(!card->vlan[GELIC_PORT_WIRELESS].tx);
 		card->vlan_required = 1;
 	} else
@@ -1790,7 +1790,7 @@ static int ps3_gelic_driver_remove(struc
 	gelic_card_free_chain(card, card->tx_top);
 	gelic_card_free_chain(card, card->rx_top);
 
-	netdev0 = card->netdev[GELIC_PORT_ETHERNET];
+	netdev0 = card->netdev[GELIC_PORT_ETHERNET_0];
 	/* disconnect event port */
 	free_irq(card->irq, card);
 	netdev0->irq = NO_IRQ;
--- a/drivers/net/ps3_gelic_net.h
+++ b/drivers/net/ps3_gelic_net.h
@@ -186,7 +186,7 @@ enum gelic_lv1_net_control_code {
 	GELIC_LV1_GET_CHANNEL           = 6,
 	GELIC_LV1_POST_WLAN_CMD		= 9,
 	GELIC_LV1_GET_WLAN_CMD_RESULT	= 10,
-	GELIC_LV1_GET_WLAN_EVENT	= 11
+	GELIC_LV1_GET_WLAN_EVENT	= 11,
 };
 
 /* for GELIC_LV1_SET_WOL */
@@ -217,24 +217,29 @@ enum gelic_lv1_ether_port_status {
 	GELIC_LV1_ETHER_SPEED_10	= 0x0000000000000010L,
 	GELIC_LV1_ETHER_SPEED_100	= 0x0000000000000020L,
 	GELIC_LV1_ETHER_SPEED_1000	= 0x0000000000000040L,
-	GELIC_LV1_ETHER_SPEED_MASK	= 0x0000000000000070L
+	GELIC_LV1_ETHER_SPEED_MASK	= 0x0000000000000070L,
 };
 
 enum gelic_lv1_vlan_index {
 	/* for outgoing packets */
-	GELIC_LV1_VLAN_TX_ETHERNET	= 0x0000000000000002L,
+	GELIC_LV1_VLAN_TX_ETHERNET_0	= 0x0000000000000002L,
 	GELIC_LV1_VLAN_TX_WIRELESS	= 0x0000000000000003L,
+
 	/* for incoming packets */
-	GELIC_LV1_VLAN_RX_ETHERNET	= 0x0000000000000012L,
-	GELIC_LV1_VLAN_RX_WIRELESS	= 0x0000000000000013L
+	GELIC_LV1_VLAN_RX_ETHERNET_0	= 0x0000000000000012L,
+	GELIC_LV1_VLAN_RX_WIRELESS	= 0x0000000000000013L,
+};
+
+enum gelic_lv1_phy {
+	GELIC_LV1_PHY_ETHERNET_0	= 0x0000000000000002L,
 };
 
 /* size of hardware part of gelic descriptor */
 #define GELIC_DESCR_SIZE	(32)
 
 enum gelic_port_type {
-	GELIC_PORT_ETHERNET = 0,
-	GELIC_PORT_WIRELESS = 1,
+	GELIC_PORT_ETHERNET_0	= 0,
+	GELIC_PORT_WIRELESS	= 1,
 	GELIC_PORT_MAX
 };
 



More information about the cbe-oss-dev mailing list