[Cbe-oss-dev] Problem with WPA IE info in gelic driver?
Mikael Djurfeldt
mikael at djurfeldt.com
Tue Mar 18 06:53:26 EST 2008
[Resending as member of list---sorry if this leads to a duplicate]
My PS3 with firmware 2.17 can use WPA to communicate with my wireless
router from the game os. I am trying to get wireless networking to
work on the Linux side.
I'm running a Debian lenny system, have compiled Geoff Levand's latest
kernel sources (2.6.25-rc4-00000-g71503dd), and am using the
wpa_supplicant and wpa_cli binaries from the 20080201 ADDON CD.
Output of wpa_supplicant indicates that the WPA IE information is not
transmitted correctly from the driver (see logs below). In the list
archive, I've seen people mention the PS3 firmware responding
strangely if SSID is padded with nul:s. But in my case I haven't
enabled hiding of SSID on my DIR-655. Could you please advice me how
to proceed to solve this problem?
Details:
Because of the udev renaming rules under Debian, I have had to insert a command:
ip link set eth1_rename_ren name eth1
in the network interface configure script in order to get the correct
name on the interface.
This is my wpa_supplicant.conf:
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=wpa
ap_scan=1
network={
ssid="mamaliga"
key_mgmt=WPA-PSK
proto=WPA
pairwise=TKIP
group=TKIP
psk="<deleted>"
}
This is the output of wpa_supplicant (but see a second log below!):
-------------------------------------------------------------------------------------
brasa:/home/mdj# wpa_supplicant -ieth1 -Dps3
-c/etc/wpa_supplicant/wpa_supplicant.conf -dd
Initializing interface 'eth1' conf
'/etc/wpa_supplicant/wpa_supplicant.conf' driver 'ps3' ctrl_interface
'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' ->
'/etc/wpa_supplicant/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group='wpa' (DEPRECATED)
ap_scan=1
Line: 5 - start of a new network block
ssid - hexdump_ascii(len=8):
6d 61 6d 61 6c 69 67 61 mamaliga
key_mgmt: 0x2
proto: 0x1
pairwise: 0x8
group: 0x8
PSK (ASCII passphrase) - hexdump_ascii(len=8): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Priority group 0
id=0 ssid='mamaliga'
Initializing interface (2) 'eth1'
Interface eth1 set UP - waiting a second for the driver to complete
initialization
SIOCGIWRANGE: WE(compiled)=22 WE(source)=22 enc_capa=0xf
capabilities: key_mgmt 0xf enc 0xf
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: 00:19:c5:72:c6:48
RSN: flushing PMKID list in the driver
Setting scan request: 0 sec 100000 usec
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
ctrl_interface_group=1001 (from group name 'wpa')
wpa_driver_ps3_get_capa:<-
wpa_driver_ps3_get_capa:->
Added interface eth1
RTM_NEWLINK: operstate=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
RTM_NEWLINK: operstate=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
Wireless event: cmd=0x8b06 len=12
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Trying to get current scan results first without requesting a new scan
to speed up initial association
ioctl[SIOCGIWSCAN]: No such device
Failed to get scan results
Failed to get scan results - try scanning again
Setting scan request: 0 sec 0 usec
Starting AP scan (broadcast SSID)
Scan requested (ret=0) - scan timeout 5 seconds
EAPOL: disable timer tick
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
Wireless event: cmd=0x8b19 len=16
Received 491 bytes of scan results (2 BSSes)
Selecting BSS from priority group 0
Try to find WPA-enabled AP
0: 00:1c:f0:f4:eb:d0 ssid='mamaliga' wpa_ie_len=0 rsn_ie_len=20 caps=0x11
skip - no WPA/RSN proto match
1: 00:14:c1:1e:12:82 ssid='hokerum' wpa_ie_len=0 rsn_ie_len=20 caps=0x11
skip - SSID mismatch
Try to find non-WPA AP
0: 00:1c:f0:f4:eb:d0 ssid='mamaliga' wpa_ie_len=0 rsn_ie_len=20 caps=0x11
skip - non-WPA network not allowed
1: 00:14:c1:1e:12:82 ssid='hokerum' wpa_ie_len=0 rsn_ie_len=20 caps=0x11
skip - SSID mismatch
No suitable AP found.
Setting scan request: 5 sec 0 usec
-----------------------------------------------------------------------------------------
Here is a corresponding log from my laptop (same router):
blue:~# wpa_supplicant -ieth1 -c /etc/wpa_supplicant/wpa_supplicant.conf -dd
Initializing interface 'eth1' conf
'/etc/wpa_supplicant/wpa_supplicant.conf' driver 'default'
ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' ->
'/etc/wpa_supplicant/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ap_scan=1
Line: 5 - start of a new network block
ssid - hexdump_ascii(len=8):
6d 61 6d 61 6c 69 67 61 mamaliga
key_mgmt: 0x2
proto: 0x1
pairwise: 0x8
group: 0x8
PSK (ASCII passphrase) - hexdump_ascii(len=8): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Priority group 0
id=0 ssid='mamaliga'
Initializing interface (2) 'eth1'
Interface eth1 set UP - waiting a second for the driver to complete
initialization
SIOCGIWRANGE: WE(compiled)=22 WE(source)=18 enc_capa=0xf
capabilities: key_mgmt 0xf enc 0xf
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: 00:13:ce:3a:67:8a
wpa_driver_wext_set_wpa
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
wpa_driver_wext_set_drop_unencrypted
RSN: flushing PMKID list in the driver
Setting scan request: 0 sec 100000 usec
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
Added interface eth1
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b19 len=8
Received 1260 bytes of scan results (5 BSSes)
CTRL-EVENT-SCAN-RESULTS
Selecting BSS from priority group 0
Try to find WPA-enabled AP
0: 00:1c:f0:f4:eb:d0 ssid='mamaliga' wpa_ie_len=26 rsn_ie_len=24 caps=0x11
selected based on WPA IE
selected WPA AP 00:1c:f0:f4:eb:d0 ssid='mamaliga'
Try to find non-WPA AP
Trying to associate with 00:1c:f0:f4:eb:d0 (SSID='mamaliga' freq=2412 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2 proto 1
WPA: set AP WPA IE - hexdump(len=28): dd 1a 00 50 f2 01 01 00 00 50 f2
02 02 00 00 50 f2 02 00 50 f2 04 01 00 00 50 f2 02
WPA: set AP RSN IE - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00
0f ac 02 00 0f ac 04 01 00 00 0f ac 02 00 00
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: not using MGMT group cipher
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00
00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_wext_set_drop_unencrypted
State: DISCONNECTED -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_associate
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RSN: Ignored PMKID candidate without preauth flag
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b04 len=12
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b1a len=16
RX EAPOL from 00:1c:f0:f4:eb:d0
RX EAPOL - hexdump(len=99): 01 03 00 5f fe 00 89 00 20 00 00 00 00 00
00 00 c0 cc d4 7e 98 87 04 ef 75 fc d5 35 3b 13 2b 72 39 0a c6 72 c9
7e 85 bc 3e ff 13 df 3c 0a 70 fd 84 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Setting authentication timeout: 10 sec 0 usec
IEEE 802.1X RX: version=1 type=3 length=95
EAPOL-Key type=254
key_info 0x89 (ver=1 keyidx=0 rsvd=0 Pairwise Ack)
key_length=32 key_data_length=0
replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 c0
key_nonce - hexdump(len=32): cc d4 7e 98 87 04 ef 75 fc d5 35 3b 13
2b 72 39 0a c6 72 c9 7e 85 bc 3e ff 13 df 3c 0a 70 fd 84
key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
WPA: RX EAPOL-Key - hexdump(len=99): 01 03 00 5f fe 00 89 00 20 00 00
00 00 00 00 00 c0 cc d4 7e 98 87 04 ef 75 fc d5 35 3b 13 2b 72 39 0a
c6 72 c9 7e 85 bc 3e ff 13 df 3c 0a 70 fd 84 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
State: ASSOCIATING -> 4WAY_HANDSHAKE
More information about the cbe-oss-dev
mailing list