[Cbe-oss-dev] [regression/bisected] corrupt CD data after media change and delay

[Geert Uytterhoeven]

On Fri, 6 Jun 2008, James Bottomley wrote:
> On Fri, 2008-06-06 at 16:06 +0200, Geert Uytterhoeven wrote:
> > When mounting a CD/DVD more than 30 seconds after inserting it, and reading
> > from it, we get:
> > 
> >     attempt to access beyond end of device
> >     sr0: rw=0, want=371932, limit=371928
> >     Buffer I/O error on device sr0, logical block 92982
> >     attempt to access beyond end of device
> >     sr0: rw=0, want=371936, limit=371928
> >     Buffer I/O error on device sr0, logical block 92983
> >     attempt to access beyond end of device
> >     sr0: rw=0, want=371940, limit=371928
> >     Buffer I/O error on device sr0, logical block 92984
> >     attempt to access beyond end of device
> >     sr0: rw=0, want=371944, limit=371928
> >     Buffer I/O error on device sr0, logical block 92985
> >     attempt to access beyond end of device
> >     sr0: rw=0, want=371948, limit=371928
> >     Buffer I/O error on device sr0, logical block 92986
> >     ...
> > 
> > It can be reproduced on a PS3 with busybox userland using:
> > 
> >     # Insert first CD
> >     $ mount /dev/sr0 /mnt
> >     $ ls -R /mnt
> >     $ umount /mnt
> >     $ eject
> >     # Remove first CD
> > 
> >     # Insert second CD
> >     # Wait at least 30 seconds
> >     $ mount /dev/sr0 /mnt
> >     $ tar cf /dev/null /mnt
> > 
> > It does not happen when mounting the second CD within 30 seconds after
> > inserting it, which is consistent with
> > 
> >     #define SR_TIMEOUT     (30 * HZ)
> > 
> > I can't seem to reproduce it with a Debian or Fedora Core 6 userland.
> > 
> > The problem is present in 2.6.25.
> > 2.6.24 is OK.
> 
> Also, in the two different situations, what does
> 
> cat /sys/block/sr0/size
> 
> (assuming your cd is sr0) give you?  My first theory is an incorrect
> size propagating from something.

Nice first theory!

Initially /sys/block/sr0/size is 2097151.

After inserting the first CD, and mounting it, /sys/block/sr0/size is changed
to the size of the first CD (in 512 byte blocks).

After ejecting the first CD and inserting the second CD, the behavior is like
this:
  1. when immediately mounting the CD, /sys/block/sr0/size is updated to the
     size of the second CD,
  2. when waiting more than 30 seconds before mounting the CD,
     /sys/block/sr0/size is not updated, and keeps the old value.

Surprisingly, it doesn't behave like this when inserting the first CD.
/sys/block/sr0/size is always updated, whether I wait 30 seconds before
mounting it or not.

With kind regards,

Geert Uytterhoeven
Software Architect

Sony Techsoft Centre
The Corporate Village · Da Vincilaan 7-D1 · B-1935 Zaventem · Belgium

Phone:    +32 (0)2 700 8453
Fax:      +32 (0)2 700 8622
E-mail:   Geert.Uytterhoeven at sonycom.com
Internet: http://www.sony-europe.com/

Sony Technology and Software Centre Europe
A division of Sony Service Centre (Europe) N.V.
Registered office: Technologielaan 7 · B-1840 Londerzeel · Belgium
VAT BE 0413.825.160 · RPR Brussels
Fortis 293-0376800-10 GEBA-BE-BB