[Cbe-oss-dev] [patch 02/02] powerpc/cell: add support for power button of future IBM cell blades

[Benjamin Herrenschmidt]

On Mon, 2008-07-07 at 18:56 +0200, Christian Krafft wrote:
> From: Christian Krafft <krafft at de.ibm.com>
> 
> This patch adds support for the power button on future IBM cell blades.
> It actually doesn't shut down the machine. Instead it exposes an
> input device /dev/input/event0 to userspace which sends KEY_POWER
> if power button has been pressed.
> haldaemon actually recognizes the button, so a plattform independent acpid
> replacement should handle it correctly.
> 
> Signed-off-by: Christian Krafft <krafft at de.ibm.com>

Sorry Christian, i'm still not too happy with this one.

There are two issues at hand here:

 - The use of SELECT, that will be frowned on unfortunately.

 - I'm not too sure it's very safe the way you do it. If I understand
correctly, you can get called for that sysreset at -any- time, including
when interrupts are off right ?

That means potentially, code that has interrupts off will be interrupted
by input_report/input_sync, which is really bad (may corrupt the input
layer internal list management for example).

You could solve both things with a little trick: Have the platform code
just basically set a global flag when the button was pressed and have a
module that depends on INPUT & INPUT_DEV poll for it (slowly pls) and do
the input report.

Ben.

> Index: linux.git/arch/powerpc/platforms/cell/Kconfig
> ===================================================================
> --- linux.git.orig/arch/powerpc/platforms/cell/Kconfig
> +++ linux.git/arch/powerpc/platforms/cell/Kconfig
> @@ -87,9 +87,12 @@ config PPC_IBM_CELL_BLADE_BUTTONS
>  	bool "IBM Cell Blade Buttons"
>  	depends on CBE_RAS && PPC_IBM_CELL_BLADE
>  	default y
> +	select INPUT
> +	select INPUT_EVDEV
>  	help
>  	  Support Buttons on IBM Cell blades. This adds a method to
> -	  trigger system reset via front panel pinhole button.
> +	  trigger system reset via front panel pinhole button and
> +	  an input device for the power button.
>  
>  config CBE_THERM
>  	tristate "CBE thermal support"
> Index: linux.git/arch/powerpc/platforms/cell/ras.c
> ===================================================================
> --- linux.git.orig/arch/powerpc/platforms/cell/ras.c
> +++ linux.git/arch/powerpc/platforms/cell/ras.c
> @@ -14,6 +14,11 @@
>  #include <linux/smp.h>
>  #include <linux/reboot.h>
>  
> +#ifdef CONFIG_PPC_IBM_CELL_BLADE_BUTTONS
> +#include <linux/input.h>
> +#include <linux/platform_device.h>
> +#endif /* CONFIG_PPC_IBM_CELL_BLADE_BUTTONS */
> +
>  #include <asm/reg.h>
>  #include <asm/io.h>
>  #include <asm/prom.h>
> @@ -232,31 +237,76 @@ static struct notifier_block cbe_ptcal_r
>  
>  #ifdef CONFIG_PPC_IBM_CELL_BLADE_BUTTONS
>  static int sysreset_hack;
> +static struct input_dev *button_dev;
> +static struct platform_device *button_pdev;
>  
>  static int __init cbe_sysreset_init(void)
>  {
> +	int ret = 0;
> +	struct input_dev *dev;
>  	struct cbe_pmd_regs __iomem *regs;
>  
>  	sysreset_hack = machine_is_compatible("IBM,CBPLUS-1.0");
>  	if (!sysreset_hack)
> -		return 0;
> +		goto out;
>  
>  	regs = cbe_get_cpu_pmd_regs(0);
>  	if (!regs)
> -		return 0;
> +		goto out;
>  
>  	/* Enable JTAG system-reset hack */
>  	out_be32(&regs->fir_mode_reg,
>  		in_be32(&regs->fir_mode_reg) |
>  		CBE_PMD_FIR_MODE_M8);
>  
> -	return 0;
> +	dev = input_allocate_device();
> +	if (!dev) {
> +		ret = -ENOMEM;
> +		printk(KERN_ERR "%s: Not enough memory\n", __func__);
> +		goto out;
> +	}
> +
> +	set_bit(EV_KEY, dev->evbit);
> +	set_bit(KEY_POWER, dev->keybit);
> +
> +	dev->name = "Power Button";
> +	dev->id.bustype = BUS_HOST;
> +
> +	/* this makes the button look like an acpi power button
> +	 * no clue whether anyone relies on that though */
> +	dev->id.product = 0x02;
> +	dev->phys = "LNXPWRBN/button/input0";
> +
> +	button_pdev = platform_device_register_simple("power_button", 0, NULL, 0);
> +	if (IS_ERR(button_pdev)) {
> +		ret = PTR_ERR(button_pdev);
> +		goto out_free_input;
> +	}
> +
> +	dev->dev.parent = &button_pdev->dev;
> + 	ret = input_register_device(dev);
> +
> +	if (ret) {
> +		printk(KERN_ERR "%s: Failed to register device\n", __func__);
> +		goto out_free_pdev;
> +	}
> +
> +	button_dev = dev;
> +	goto out;
> +
> +out_free_pdev:
> +	platform_device_unregister(button_pdev);
> +out_free_input:
> +	input_free_device(dev);
> +out:
> +	return ret;
>  }
>  device_initcall(cbe_sysreset_init);
>  
>  int cbe_sysreset_hack(void)
>  {
>  	struct cbe_pmd_regs __iomem *regs;
> +	u64 status;
>  
>  	/*
>  	 * The BMC can inject user triggered system reset exceptions,
> @@ -267,10 +317,20 @@ int cbe_sysreset_hack(void)
>  		regs = cbe_get_cpu_pmd_regs(0);
>  		if (!regs)
>  			return 0;
> -		if (in_be64(&regs->ras_esc_0) & 0x0000ffff) {
> +		status = in_be64(&regs->ras_esc_0);
> +		if (status & 0x0000ffff) {
>  			out_be64(&regs->ras_esc_0, 0);
>  			return 0;
>  		}
> +		if (status & 0x00010000) {
> +			out_be64(&regs->ras_esc_0, 0);
> +			if (!button_dev)
> +				return 0;
> +			input_report_key(button_dev, KEY_POWER, 1);
> +			input_sync(button_dev);
> +			input_report_key(button_dev, KEY_POWER, 0);
> +			input_sync(button_dev);
> +		}
>  	}
>  	return 1;
>  }
>