[Cbe-oss-dev] [patch 01/11] powerpc/cell: add support for power button of future IBM cell blades

[Benjamin Herrenschmidt]

On Fri, 2008-07-04 at 21:05 +0200, arnd at arndb.de wrote:
> plain text document attachment
> (0001-powerpc-cell-add-support-for-power-button-of-future.patch)
> This patch adds support for the power button on future IBM cell blades.
> It actually doesn't shut down the machine. Instead it exposes an
> input device /dev/input/event0 to userspace which sends KEY_POWER
> if power button has been pressed.
> haldaemon actually recognizes the button, so a plattform independent acpid
> replacement should handle it correctly.
> 
> Signed-off-by: Christian Krafft <krafft at de.ibm.com>
> Signed-off-by: Arnd Bergmann <arnd at arndb.de>
> ---

And what if CONFIG_INPUT=n or m ?

Cheers,
Ben.

>  arch/powerpc/platforms/cell/pervasive.c |   70 ++++++++++++++++++++++++++++++-
>  1 files changed, 69 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/powerpc/platforms/cell/pervasive.c b/arch/powerpc/platforms/cell/pervasive.c
> index 8a3631c..e5bd08c 100644
> --- a/arch/powerpc/platforms/cell/pervasive.c
> +++ b/arch/powerpc/platforms/cell/pervasive.c
> @@ -24,8 +24,10 @@
>  #undef DEBUG
>  
>  #include <linux/interrupt.h>
> +#include <linux/input.h>
>  #include <linux/irq.h>
>  #include <linux/percpu.h>
> +#include <linux/platform_device.h>
>  #include <linux/types.h>
>  #include <linux/kallsyms.h>
>  
> @@ -40,6 +42,9 @@
>  
>  static int sysreset_hack;
>  
> +static struct input_dev *button_dev;
> +static struct platform_device *button_pdev;
> +
>  static void cbe_power_save(void)
>  {
>  	unsigned long ctrl, thread_switch_control;
> @@ -105,10 +110,21 @@ static int cbe_system_reset_exception(struct pt_regs *regs)
>  		 */
>  		if (sysreset_hack && (cpu = smp_processor_id()) == 0) {
>  			pmd = cbe_get_cpu_pmd_regs(cpu);
> -			if (in_be64(&pmd->ras_esc_0) & 0xffff) {
> +			if (in_be64(&pmd->ras_esc_0) & 0x0000ffff) {
>  				out_be64(&pmd->ras_esc_0, 0);
>  				return 0;
>  			}
> +			if (in_be64(&pmd->ras_esc_0) & 0x00010000) {
> +				out_be64(&pmd->ras_esc_0, 0);
> +				if (!button_dev)
> +					return 0;
> +
> +				input_report_key(button_dev, KEY_POWER, 1);
> +				input_sync(button_dev);
> +				input_report_key(button_dev, KEY_POWER, 0);
> +				input_sync(button_dev);
> +				return 1;
> +			}
>  		}
>  		break;
>  #ifdef CONFIG_CBE_RAS
> @@ -155,3 +171,55 @@ void __init cbe_pervasive_init(void)
>  	ppc_md.power_save = cbe_power_save;
>  	ppc_md.system_reset_exception = cbe_system_reset_exception;
>  }
> +
> +static int __init cbe_power_button_init(void)
> +{
> +	int ret;
> +	struct input_dev *dev;
> +
> +	if (!sysreset_hack)
> +		return 0;
> +
> +	dev = input_allocate_device();
> +        if (!dev) {
> +		ret = -ENOMEM;
> +                printk(KERN_ERR "%s: Not enough memory\n", __func__);
> +                goto out;
> +        }
> +
> +	set_bit(EV_KEY, dev->evbit);
> +	set_bit(KEY_POWER, dev->keybit);
> +
> +	dev->name = "Power Button";
> +	dev->id.bustype = BUS_HOST;
> +
> +	/* this makes the button look like an acpi power button
> +	 * no clue whether anyone relies on that though */
> +	dev->id.product = 0x02;
> +	dev->phys = "LNXPWRBN/button/input0";
> +
> +	button_pdev = platform_device_register_simple("power_button", 0, NULL, 0);
> +	if (IS_ERR(button_pdev)) {
> +		ret = PTR_ERR(button_pdev);
> +		goto out_free_input;
> +	}
> +
> +	dev->dev.parent = &button_pdev->dev;
> +
> +	ret = input_register_device(dev);
> +	if (ret) {
> +                printk(KERN_ERR "%s: Failed to register device\n", __func__);
> +		goto out_free_pdev;
> +        }
> +
> +	button_dev = dev;
> +	return ret;
> +
> +out_free_pdev:
> +	platform_device_unregister(button_pdev);
> +out_free_input:
> +	input_free_device(dev);
> +out:
> +	return ret;
> +}
> +device_initcall(cbe_power_button_init);
> -- 
> 1.5.4.3
>