[Cbe-oss-dev] ps3 experimental patches updated
Florin Malita
fmalita at gmail.com
Tue Jan 9 01:33:14 EST 2007
Benjamin Herrenschmidt wrote:
> It should at least buffer the output...
>
>> Here we go - let me know if you need more info:
>>
>> 000000
>> Memory hole size: 0MB
>> Zone PFN ranges:
>> DMA 0 -> 2048
>> Normal 2048 -> 2048
>> early_node_map[1] active PFN ranges
>> 0: 0 -> 2048
>> On node 0 totalpages: 2048
>> DMA zone: 1 pages used for memmap
>> DMA zone: 0 pages reserved
>> DMA zone: 2047 pages, LIFO batch:0
>> Normal zone: 0 pages used for memmap
>> *** 0000 : CF000015
>>
>> *** 0000 : Setup Done
>> [boot]0015 Setup Done
>> Built 1 zonelists. Total pages: 2047
>> Kernel command line: root=/dev/sda1 video=ps3fb:mode:12
>>
>
> Doesn't look like it.
>
I noticed that - for some reason it does not push those printks out.
Tried changing the logging level (KERN_ERR), rebuilding with
EARLY_PRINTK but no luck. It actually looks like it's missing the first
part of the buffer and the start (at least what's visible from
userspace) is slightly non-deterministic:
000000
Memory hole size: 0MB
vs
144 bytes at c000000001800000
Top of RAM: 0x8000000, Total RAM: 0x8000000
Memory hole size: 0MB
vs
44 bytes at c000000001800000
Top of RAM: 0x8000000, Total RAM: 0x8000000
Memory hole size: 0MB
I'll try to increase the log buffer size and see if it fixes it. In the
meantime here's the current dmesg:
144 bytes at c000000001800000
Top of RAM: 0x8000000, Total RAM: 0x8000000
Memory hole size: 0MB
Zone PFN ranges:
DMA 0 -> 2048
Normal 2048 -> 2048
early_node_map[1] active PFN ranges
0: 0 -> 2048
On node 0 totalpages: 2048
DMA zone: 1 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 2047 pages, LIFO batch:0
Normal zone: 0 pages used for memmap
*** 0000 : CF000015
*** 0000 : Setup Done
[boot]0015 Setup Done
Built 1 zonelists. Total pages: 2047
Kernel command line: root=/dev/sda1 video=ps3fb:mode:12
PID hash table entries: 512 (order: 9, 4096 bytes)
time_init: decrementer frequency = 79.800000 MHz
time_init: processor frequency = 3192.000000 MHz
Console: colour dummy device 80x25
Dentry cache hash table entries: 16384 (order: 1, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 0, 65536 bytes)
Memory: 105856k/131072k available (3520k kernel code, 25216k reserved, 448k data, 401k bss, 256k init)
Calibrating delay loop... 157.18 BogoMIPS (lpj=78592)
Mount-cache hash table entries: 4096
-> host_map:475
host_map:493: cpu 1: hwirq 12 => virq 16
<- host_map:500
ps3_alloc_event_irq:122: outlet 12, virq 16
chip_unmask:430: cpu 1, virq 16
-> host_map:475
host_map:493: cpu 1: hwirq 13 => virq 17
<- host_map:500
ps3_alloc_event_irq:122: outlet 13, virq 17
chip_unmask:430: cpu 1, virq 17
Processor 1 found.
-> host_map:475
host_map:493: cpu 1: hwirq 14 => virq 18
<- host_map:500
ps3_alloc_event_irq:122: outlet 14, virq 18
chip_unmask:430: cpu 1, virq 18
-> host_map:475
host_map:493: cpu 1: hwirq 15 => virq 19
<- host_map:500
ps3_alloc_event_irq:122: outlet 15, virq 19
chip_unmask:430: cpu 1, virq 19
ps3_register_ipi_debug_brk:516: cpu 1, virq 19, mask 100000000000h
Brought up 2 CPUs
-> host_map:475
host_map:493: cpu 0: hwirq 19 => virq 20
<- host_map:500
ps3_alloc_event_irq:122: outlet 19, virq 20
chip_unmask:430: cpu 0, virq 20
-> host_map:475
host_map:493: cpu 0: hwirq 20 => virq 21
<- host_map:500
ps3_alloc_event_irq:122: outlet 20, virq 21
chip_unmask:430: cpu 0, virq 21
-> host_map:475
host_map:493: cpu 0: hwirq 21 => virq 22
<- host_map:500
ps3_alloc_event_irq:122: outlet 21, virq 22
chip_unmask:430: cpu 0, virq 22
-> host_map:475
host_map:493: cpu 0: hwirq 22 => virq 23
<- host_map:500
ps3_alloc_event_irq:122: outlet 22, virq 23
chip_unmask:430: cpu 0, virq 23
ps3_register_ipi_debug_brk:516: cpu 0, virq 23, mask 10000000000h
migration_cost=7
ps3_mm_add_memory:318: start_addr 6c0060000000h, start_pfn 6c006000h, nr_pages 700h
NET: Registered protocol family 16
ps3pf_pcibios_init:460
PCI: Probing PCI hardware
Call Trace:
[C000000007F6FB20] [C00000000000F814] .show_stack+0x54/0x1f0 (unreliable)
[C000000007F6FBD0] [C000000000043FEC] .pcibios_fixup_bus+0x5c/0x5e0
[C000000007F6FCE0] [C00000000017D178] .pci_scan_child_bus+0x78/0x130
[C000000007F6FD80] [C000000000027358] .scan_phb+0x168/0x220
[C000000007F6FE20] [C0000000003404A8] .pcibios_init+0x78/0x1d0
[C000000007F6FEB0] [C0000000000091C8] .init+0x1d8/0x440
[C000000007F6FF90] [C000000000022598] .kernel_thread+0x4c/0x68
ps3pf_fixup_device_resources bus:0 dev:1 func:0
0000:00:01.0: IRQ 0
resource[0]:start:0 end:0
-> host_map:475
host_map:493: cpu 0: hwirq 23 => virq 24
<- host_map:500
ps3_alloc_io_irq:74: cpu 0, interrupt_id 16 => outlet 23, virq 24
ps3pf_fixup_device_resources:783: IRQ: intr=16 IRQ=24
ps3pf_open_device:429: 1:1
0:type:3 region:3010000 size:10000 > lpar:4000000e0000-4000000effff
allocate dma region(bus_id:1 dev_id:1)
lv1_map_device_dma_region faild, status=-17
ps3pf_fixup_device_resources bus:0 dev:1 func:1
0000:00:01.1: IRQ 0
resource[0]:start:0 end:0
-> host_map:475
host_map:493: cpu 0: hwirq 2 => virq 25
<- host_map:500
ps3_alloc_io_irq:74: cpu 0, interrupt_id 10 => outlet 2, virq 25
ps3pf_fixup_device_resources:783: IRQ: intr=10 IRQ=25
1:type:4 region:3810000 size:10000 > lpar:4000000f0000-4000000fffff
allocate dma region(bus_id:1 dev_id:1)
lv1_map_device_dma_region faild, status=-17
ps3pf_fixup_device_resources bus:0 dev:2 func:0
0000:00:02.0: IRQ 0
resource[0]:start:0 end:0
-> host_map:475
host_map:493: cpu 0: hwirq 24 => virq 26
<- host_map:500
ps3_alloc_io_irq:74: cpu 0, interrupt_id 17 => outlet 24, virq 26
ps3pf_fixup_device_resources:783: IRQ: intr=17 IRQ=26
ps3pf_open_device:429: 1:2
0:type:3 region:3020000 size:10000 > lpar:400000100000-40000010ffff
allocate dma region(bus_id:1 dev_id:2)
lv1_map_device_dma_region faild, status=-17
ps3pf_fixup_device_resources bus:0 dev:2 func:1
0000:00:02.1: IRQ 0
resource[0]:start:0 end:0
-> host_map:475
host_map:493: cpu 0: hwirq 25 => virq 27
<- host_map:500
ps3_alloc_io_irq:74: cpu 0, interrupt_id 11 => outlet 25, virq 27
ps3pf_fixup_device_resources:783: IRQ: intr=11 IRQ=27
1:type:4 region:3820000 size:10000 > lpar:400000110000-40000011ffff
allocate dma region(bus_id:1 dev_id:2)
lv1_map_device_dma_region faild, status=-17
get_bus_io_range(): unexpected region 0x0->0x0
PCI: Probing PCI hardware done
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ps3_vuart vuart_01: ps3_vuart_match:742: dev=4(vuart_01), drv=4(ps3_av): match
-> host_map:475
host_map:493: cpu 0: hwirq 26 => virq 28
<- host_map:500
ps3_alloc_vuart_irq:244: outlet 26, virq 28
chip_unmask:430: cpu 0, virq 28
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: -3, 8192 bytes)
TCP established hash table entries: 4096 (order: 0, 65536 bytes)
TCP bind hash table entries: 2048 (order: -1, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 2048)
TCP reno registered
-> host_map:475
host_map:493: cpu 0: hwirq 28 => virq 29
<- host_map:500
ps3_alloc_spe_irq:293: spe_id 27, class 0, outlet 28, virq 29
-> host_map:475
host_map:493: cpu 0: hwirq 29 => virq 30
<- host_map:500
ps3_alloc_spe_irq:293: spe_id 27, class 1, outlet 29, virq 30
-> host_map:475
host_map:493: cpu 0: hwirq 30 => virq 31
<- host_map:500
ps3_alloc_spe_irq:293: spe_id 27, class 2, outlet 30, virq 31
chip_unmask:430: cpu 0, virq 29
chip_unmask:430: cpu 0, virq 30
chip_unmask:430: cpu 0, virq 31
-> host_map:475
host_map:493: cpu 0: hwirq 32 => virq 32
<- host_map:500
ps3_alloc_spe_irq:293: spe_id 31, class 0, outlet 32, virq 32
-> host_map:475
host_map:493: cpu 0: hwirq 33 => virq 33
<- host_map:500
ps3_alloc_spe_irq:293: spe_id 31, class 1, outlet 33, virq 33
-> host_map:475
host_map:493: cpu 0: hwirq 34 => virq 34
<- host_map:500
ps3_alloc_spe_irq:293: spe_id 31, class 2, outlet 34, virq 34
chip_unmask:430: cpu 0, virq 32
chip_unmask:430: cpu 0, virq 33
chip_unmask:430: cpu 0, virq 34
-> host_map:475
host_map:493: cpu 0: hwirq 36 => virq 36
<- host_map:500
ps3_alloc_spe_irq:293: spe_id 35, class 0, outlet 36, virq 36
-> host_map:475
host_map:493: cpu 0: hwirq 37 => virq 37
<- host_map:500
ps3_alloc_spe_irq:293: spe_id 35, class 1, outlet 37, virq 37
-> host_map:475
host_map:493: cpu 0: hwirq 38 => virq 38
<- host_map:500
ps3_alloc_spe_irq:293: spe_id 35, class 2, outlet 38, virq 38
chip_unmask:430: cpu 0, virq 36
chip_unmask:430: cpu 0, virq 37
chip_unmask:430: cpu 0, virq 38
-> host_map:475
host_map:493: cpu 0: hwirq 40 => virq 40
<- host_map:500
ps3_alloc_spe_irq:293: spe_id 39, class 0, outlet 40, virq 40
-> host_map:475
host_map:493: cpu 0: hwirq 41 => virq 41
<- host_map:500
ps3_alloc_spe_irq:293: spe_id 39, class 1, outlet 41, virq 41
-> host_map:475
host_map:493: cpu 0: hwirq 42 => virq 42
<- host_map:500
ps3_alloc_spe_irq:293: spe_id 39, class 2, outlet 42, virq 42
chip_unmask:430: cpu 0, virq 40
chip_unmask:430: cpu 0, virq 41
chip_unmask:430: cpu 0, virq 42
-> host_map:475
host_map:493: cpu 0: hwirq 44 => virq 44
<- host_map:500
ps3_alloc_spe_irq:293: spe_id 43, class 0, outlet 44, virq 44
-> host_map:475
host_map:493: cpu 0: hwirq 45 => virq 45
<- host_map:500
ps3_alloc_spe_irq:293: spe_id 43, class 1, outlet 45, virq 45
-> host_map:475
host_map:493: cpu 0: hwirq 46 => virq 46
<- host_map:500
ps3_alloc_spe_irq:293: spe_id 43, class 2, outlet 46, virq 46
chip_unmask:430: cpu 0, virq 44
chip_unmask:430: cpu 0, virq 45
chip_unmask:430: cpu 0, virq 46
-> host_map:475
host_map:493: cpu 0: hwirq 48 => virq 48
<- host_map:500
ps3_alloc_spe_irq:293: spe_id 47, class 0, outlet 48, virq 48
-> host_map:475
host_map:493: cpu 0: hwirq 49 => virq 49
<- host_map:500
ps3_alloc_spe_irq:293: spe_id 47, class 1, outlet 49, virq 49
-> host_map:475
host_map:493: cpu 0: hwirq 50 => virq 50
<- host_map:500
ps3_alloc_spe_irq:293: spe_id 47, class 2, outlet 50, virq 50
chip_unmask:430: cpu 0, virq 48
chip_unmask:430: cpu 0, virq 49
chip_unmask:430: cpu 0, virq 50
io scheduler noop registered
io scheduler cfq registered (default)
-> host_map:475
host_map:493: cpu 1: hwirq 53 => virq 53
<- host_map:500
ps3_alloc_irq:302: outlet 53, virq 53
chip_unmask:430: cpu 1, virq 53
Console: switching to colour frame buffer device 160x64
fb0: GPU frame buffer device, using 18432K of video memory
Generic RTC Driver v1.07
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
..........
Looking for disk devices...
-> host_map:475
host_map:493: cpu 1: hwirq 54 => virq 54
<- host_map:500
ps3_alloc_event_irq:122: outlet 54, virq 54
ps3_connect_event_irq:185: interrupt_id 0, virq 54
chip_unmask:430: cpu 1, virq 54
chip_mask:413: cpu 1, virq 54
-> ps3_disconnect_event_irq:197: interrupt_id 0, virq 54
-> ps3_free_event_irq:132
Trying to install interrupt handler for IRQ54
host_unmap:458: virq 54
<- ps3_free_event_irq:142
<- ps3_disconnect_event_irq:209
-> host_map:475
host_map:493: cpu 1: hwirq 55 => virq 55
<- host_map:500
ps3_alloc_event_irq:122: outlet 55, virq 55
ps3_connect_event_irq:185: interrupt_id 0, virq 55
chip_unmask:430: cpu 1, virq 55
chip_mask:413: cpu 1, virq 55
-> ps3_disconnect_event_irq:197: interrupt_id 0, virq 55
-> ps3_free_event_irq:132
Trying to install interrupt handler for IRQ55
host_unmap:458: virq 55
<- ps3_free_event_irq:142
<- ps3_disconnect_event_irq:209
-> host_map:475
host_map:493: cpu 1: hwirq 54 => virq 54
<- host_map:500
ps3_alloc_event_irq:122: outlet 54, virq 54
ps3_connect_event_irq:185: interrupt_id 0, virq 54
chip_unmask:430: cpu 1, virq 54
chip_mask:413: cpu 1, virq 54
-> ps3_disconnect_event_irq:197: interrupt_id 0, virq 54
-> ps3_free_event_irq:132
Trying to install interrupt handler for IRQ54
host_unmap:458: virq 54
<- ps3_free_event_irq:142
<- ps3_disconnect_event_irq:209
-> host_map:475
host_map:493: cpu 1: hwirq 55 => virq 55
<- host_map:500
ps3_alloc_event_irq:122: outlet 55, virq 55
ps3_connect_event_irq:185: interrupt_id 0, virq 55
chip_unmask:430: cpu 1, virq 55
chip_mask:413: cpu 1, virq 55
-> ps3_disconnect_event_irq:197: interrupt_id 0, virq 55
-> ps3_free_event_irq:132
Trying to install interrupt handler for IRQ55
host_unmap:458: virq 55
<- ps3_free_event_irq:142
<- ps3_disconnect_event_irq:209
Region 3: id 3 start 25165832 size 92044408
ps3_stor: dev=2 type=0 port=2 regions=4 accessible=1
Looking for ROM devices...
Region 0: id 0 start 0 size 2147483647
ps3_stor: dev=3 type=5 port=0 regions=1 accessible=1
Looking for FLASH devices...
-> host_map:475
host_map:493: cpu 1: hwirq 54 => virq 54
<- host_map:500
ps3_alloc_event_irq:122: outlet 54, virq 54
ps3_connect_event_irq:185: interrupt_id 0, virq 54
chip_unmask:430: cpu 1, virq 54
chip_mask:413: cpu 1, virq 54
-> ps3_disconnect_event_irq:197: interrupt_id 0, virq 54
-> ps3_free_event_irq:132
Trying to install interrupt handler for IRQ54
host_unmap:458: virq 54
<- ps3_free_event_irq:142
<- ps3_disconnect_event_irq:209
-> host_map:475
host_map:493: cpu 1: hwirq 55 => virq 55
<- host_map:500
ps3_alloc_event_irq:122: outlet 55, virq 55
ps3_connect_event_irq:185: interrupt_id 0, virq 55
chip_unmask:430: cpu 1, virq 55
chip_mask:413: cpu 1, virq 55
-> ps3_disconnect_event_irq:197: interrupt_id 0, virq 55
-> ps3_free_event_irq:132
Trying to install interrupt handler for IRQ55
host_unmap:458: virq 55
<- ps3_free_event_irq:142
<- ps3_disconnect_event_irq:209
-> host_map:475
host_map:493: cpu 1: hwirq 54 => virq 54
<- host_map:500
ps3_alloc_event_irq:122: outlet 54, virq 54
ps3_connect_event_irq:185: interrupt_id 0, virq 54
chip_unmask:430: cpu 1, virq 54
chip_mask:413: cpu 1, virq 54
-> ps3_disconnect_event_irq:197: interrupt_id 0, virq 54
-> ps3_free_event_irq:132
Trying to install interrupt handler for IRQ54
host_unmap:458: virq 54
<- ps3_free_event_irq:142
<- ps3_disconnect_event_irq:209
-> host_map:475
host_map:493: cpu 1: hwirq 55 => virq 55
<- host_map:500
ps3_alloc_event_irq:122: outlet 55, virq 55
ps3_connect_event_irq:185: interrupt_id 0, virq 55
chip_unmask:430: cpu 1, virq 55
chip_mask:413: cpu 1, virq 55
-> ps3_disconnect_event_irq:197: interrupt_id 0, virq 55
-> ps3_free_event_irq:132
Trying to install interrupt handler for IRQ55
host_unmap:458: virq 55
<- ps3_free_event_irq:142
<- ps3_disconnect_event_irq:209
-> host_map:475
host_map:493: cpu 1: hwirq 54 => virq 54
<- host_map:500
ps3_alloc_event_irq:122: outlet 54, virq 54
ps3_connect_event_irq:185: interrupt_id 0, virq 54
chip_unmask:430: cpu 1, virq 54
chip_mask:413: cpu 1, virq 54
-> ps3_disconnect_event_irq:197: interrupt_id 0, virq 54
-> ps3_free_event_irq:132
Trying to install interrupt handler for IRQ54
host_unmap:458: virq 54
<- ps3_free_event_irq:142
<- ps3_disconnect_event_irq:209
-> host_map:475
host_map:493: cpu 1: hwirq 55 => virq 55
<- host_map:500
ps3_alloc_event_irq:122: outlet 55, virq 55
ps3_connect_event_irq:185: interrupt_id 0, virq 55
chip_unmask:430: cpu 1, virq 55
chip_mask:413: cpu 1, virq 55
-> ps3_disconnect_event_irq:197: interrupt_id 0, virq 55
-> ps3_free_event_irq:132
Trying to install interrupt handler for IRQ55
host_unmap:458: virq 55
<- ps3_free_event_irq:142
<- ps3_disconnect_event_irq:209
-> host_map:475
host_map:493: cpu 1: hwirq 54 => virq 54
<- host_map:500
ps3_alloc_event_irq:122: outlet 54, virq 54
ps3_connect_event_irq:185: interrupt_id 0, virq 54
chip_unmask:430: cpu 1, virq 54
chip_mask:413: cpu 1, virq 54
-> ps3_disconnect_event_irq:197: interrupt_id 0, virq 54
-> ps3_free_event_irq:132
Trying to install interrupt handler for IRQ54
host_unmap:458: virq 54
<- ps3_free_event_irq:142
<- ps3_disconnect_event_irq:209
Region 5: id 5 start 473600 size 8192
ps3_stor: dev=1 type=14 port=0 regions=7 accessible=1
scsi0 : ps3_stor
-> host_map:475
host_map:493: cpu 0: hwirq 55 => virq 55
<- host_map:500
ps3_alloc_event_irq:122: outlet 55, virq 55
ps3_connect_event_irq:185: interrupt_id 0, virq 55
chip_unmask:430: cpu 0, virq 55
blk_queue_max_sectors: set to minimum 128
scsi 0:0:0:0: CD-ROM SONY PS-SYSTEM 302R 4062 PQ: 0 ANSI: 0
scsi1 : ps3_stor
-> host_map:475
host_map:493: cpu 0: hwirq 54 => virq 54
<- host_map:500
ps3_alloc_event_irq:122: outlet 54, virq 54
ps3_connect_event_irq:185: interrupt_id 0, virq 54
chip_unmask:430: cpu 0, virq 54
scsi 1:0:0:0: Direct-Access SCEI Sec:Master-3 4989 PQ: 0 ANSI: 2
scsi2 : ps3_stor
-> host_map:475
host_map:493: cpu 0: hwirq 56 => virq 56
<- host_map:500
ps3_alloc_event_irq:122: outlet 56, virq 56
ps3_connect_event_irq:185: interrupt_id 0, virq 56
chip_unmask:430: cpu 0, virq 56
scsi 2:0:0:0: Direct-Access-RBC SCEI Flash-5 4989 PQ: 0 ANSI: 2
SCSI device sda: 92044408 512-byte hdwr sectors (47127 MB)
sda: Write Protect is off
sda: Mode Sense: 00 18 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 92044408 512-byte hdwr sectors (47127 MB)
sda: Write Protect is off
sda: Mode Sense: 00 18 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 1:0:0:0: Attached scsi disk sda
SCSI device sdb: 8192 512-byte hdwr sectors (4 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 18 0e 00
SCSI device sdb: write cache: disabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sdb: 8192 512-byte hdwr sectors (4 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 18 0e 00
SCSI device sdb: write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: unknown partition table
sd 2:0:0:0: Attached scsi disk sdb
sr0: scsi3-mmc drive: 4x/4x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
PCI: Enabling device: (0000:00:01.1), cmd 2
usb_hcd_pci_probe:127: rsrc_start 4000000f0000h
usb_hcd_pci_probe:128: rsrc_len 10000h
usb_hcd_pci_probe:129: regs d000080080480000h
usb_hcd_pci_probe:133: irq 25
ehci_hcd 0000:00:01.1: EHCI Host Controller
drivers/usb/core/inode.c: creating file 'devices'
drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:01.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:01.1: reset hcs_params 0x1212 dbg=0 cc=1 pcc=2 ordered ports=2
ehci_hcd 0000:00:01.1: reset hcc_params 0016 thresh 1 uframes 256/512/1024 park
ehci_hcd 0000:00:01.1: park 0
ehci_hcd 0000:00:01.1: MWI active
ehci_hcd 0000:00:01.1: ...powerdown ports...
ehci_hcd 0000:00:01.1: supports USB remote wakeup
chip_unmask:430: cpu 0, virq 25
ehci_hcd 0000:00:01.1: irq 25, io mem 0x4000000f0000
ehci_hcd 0000:00:01.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:01.1: init command 010009 (park)=0 ithresh=1 period=256 RUN
ehci_hcd 0000:00:01.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: default language 0x0409
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.20-rc1 ehci_hcd
usb usb1: SerialNumber: 0000:00:01.1
usb usb1: uevent
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: uevent
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: individual port power switching
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: Single TT
hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: enabling power on all ports
hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000
drivers/usb/core/inode.c: creating file '001'
usb_hcd_pci_probe:139: OK
ehci_hcd 0000:00:01.1: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
PCI: Enabling device: (0000:00:02.1), cmd 2
usb_hcd_pci_probe:127: rsrc_start 400000110000h
usb_hcd_pci_probe:128: rsrc_len 10000h
usb_hcd_pci_probe:129: regs d000080080490000h
usb_hcd_pci_probe:133: irq 27
ehci_hcd 0000:00:02.1: EHCI Host Controller
drivers/usb/core/inode.c: creating file '002'
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:02.1: reset hcs_params 0x1212 dbg=0 cc=1 pcc=2 ordered ports=2
ehci_hcd 0000:00:02.1: reset hcc_params 0016 thresh 1 uframes 256/512/1024 park
ehci_hcd 0000:00:02.1: park 0
ehci_hcd 0000:00:02.1: MWI active
ehci_hcd 0000:00:02.1: ...powerdown ports...
ehci_hcd 0000:00:02.1: supports USB remote wakeup
chip_unmask:430: cpu 0, virq 27
ehci_hcd 0000:00:02.1: irq 27, io mem 0x400000110000
ehci_hcd 0000:00:02.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:02.1: init command 010009 (park)=0 ithresh=1 period=256 RUN
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: default language 0x0409
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.20-rc1 ehci_hcd
usb usb2: SerialNumber: 0000:00:02.1
usb usb2: uevent
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
usb 2-0:1.0: uevent
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501
hub 2-0:1.0: standalone hub
hub 2-0:1.0: individual port power switching
hub 2-0:1.0: individual port over-current protection
hub 2-0:1.0: Single TT
hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
hub 2-0:1.0: power on to power good time: 20ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: enabling power on all ports
ehci_hcd 0000:00:01.1: port 2 high speed
ehci_hcd 0000:00:01.1: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
usb 1-2: new high speed USB device using ehci_hcd and address 2
drivers/usb/core/inode.c: creating file '001'
usb_hcd_pci_probe:139: OK
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 80 td 96
PCI: Enabling device: (0000:00:01.0), cmd 2
usb_hcd_pci_probe:127: rsrc_start 4000000e0000h
usb_hcd_pci_probe:128: rsrc_len 10000h
usb_hcd_pci_probe:129: regs d0000800804a0000h
usb_hcd_pci_probe:133: irq 24
ohci_hcd 0000:00:01.0: OHCI Host Controller
drivers/usb/core/inode.c: creating file '003'
ohci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:01.0: enabled big endian Toshiba quirk
ohci_hcd 0000:00:01.0: USB HC TakeOver from BIOS/SMM
usb 1-2: khubd timed out on ep0in len=0/64
usb 1-2: khubd timed out on ep0in len=0/64
usb 1-2: khubd timed out on ep0in len=0/64
ehci_hcd 0000:00:01.1: port 2 resume error -19
hub 1-0:1.0: hub_port_status failed (err = -32)
hub 1-0:1.0: port_wait_reset: err = -32
hub 1-0:1.0: port 2 not enabled, trying reset again...
ehci_hcd 0000:00:01.1: port 2 resume error -19
hub 1-0:1.0: hub_port_status failed (err = -32)
hub 1-0:1.0: port_wait_reset: err = -32
hub 1-0:1.0: port 2 not enabled, trying reset again...
ehci_hcd 0000:00:01.1: port 2 resume error -19
hub 1-0:1.0: hub_port_status failed (err = -32)
hub 1-0:1.0: port_wait_reset: err = -32
hub 1-0:1.0: port 2 not enabled, trying reset again...
ehci_hcd 0000:00:01.1: port 2 resume error -19
hub 1-0:1.0: hub_port_status failed (err = -32)
hub 1-0:1.0: port_wait_reset: err = -32
hub 1-0:1.0: port 2 not enabled, trying reset again...
ehci_hcd 0000:00:01.1: port 2 resume error -19
hub 1-0:1.0: hub_port_status failed (err = -32)
hub 1-0:1.0: port_wait_reset: err = -32
hub 1-0:1.0: port 2 not enabled, trying reset again...
hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
ehci_hcd 0000:00:01.1: port 2 resume error -19
hub 1-0:1.0: hub_port_status failed (err = -32)
hub 1-0:1.0: port_wait_reset: err = -32
hub 1-0:1.0: port 2 not enabled, trying reset again...
ehci_hcd 0000:00:01.1: port 2 resume error -19
hub 1-0:1.0: hub_port_status failed (err = -32)
hub 1-0:1.0: port_wait_reset: err = -32
hub 1-0:1.0: port 2 not enabled, trying reset again...
ehci_hcd 0000:00:01.1: port 2 resume error -19
hub 1-0:1.0: hub_port_status failed (err = -32)
hub 1-0:1.0: port_wait_reset: err = -32
hub 1-0:1.0: port 2 not enabled, trying reset again...
ehci_hcd 0000:00:01.1: port 2 resume error -19
hub 1-0:1.0: hub_port_status failed (err = -32)
hub 1-0:1.0: port_wait_reset: err = -32
hub 1-0:1.0: port 2 not enabled, trying reset again...
ehci_hcd 0000:00:01.1: port 2 resume error -19
hub 1-0:1.0: hub_port_status failed (err = -32)
hub 1-0:1.0: port_wait_reset: err = -32
hub 1-0:1.0: port 2 not enabled, trying reset again...
hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
ehci_hcd 0000:00:01.1: port 2 resume error -19
hub 1-0:1.0: hub_port_status failed (err = -32)
hub 1-0:1.0: port_wait_reset: err = -32
hub 1-0:1.0: port 2 not enabled, trying reset again...
ehci_hcd 0000:00:01.1: port 2 resume error -19
hub 1-0:1.0: hub_port_status failed (err = -32)
hub 1-0:1.0: port_wait_reset: err = -32
hub 1-0:1.0: port 2 not enabled, trying reset again...
ehci_hcd 0000:00:01.1: port 2 resume error -19
hub 1-0:1.0: hub_port_status failed (err = -32)
hub 1-0:1.0: port_wait_reset: err = -32
hub 1-0:1.0: port 2 not enabled, trying reset again...
ehci_hcd 0000:00:01.1: port 2 resume error -19
hub 1-0:1.0: hub_port_status failed (err = -32)
hub 1-0:1.0: port_wait_reset: err = -32
hub 1-0:1.0: port 2 not enabled, trying reset again...
ohci_hcd 0000:00:01.0: USB HC takeover failed! (BIOS/SMM bug)
ohci_hcd 0000:00:01.0: can't setup
ohci_hcd 0000:00:01.0: USB bus 3 deregistered
ohci_hcd 0000:00:01.0: init 0000:00:01.0 fail, -16
ohci_hcd: probe of 0000:00:01.0 failed with error -16
PCI: Enabling device: (0000:00:02.0), cmd 2
usb_hcd_pci_probe:127: rsrc_start 400000100000h
usb_hcd_pci_probe:128: rsrc_len 10000h
usb_hcd_pci_probe:129: regs d0000800804a0000h
usb_hcd_pci_probe:133: irq 26
ohci_hcd 0000:00:02.0: OHCI Host Controller
drivers/usb/core/inode.c: creating file '003'
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.0: enabled big endian Toshiba quirk
ohci_hcd 0000:00:02.0: created debug files
chip_unmask:430: cpu 0, virq 26
ohci_hcd 0000:00:02.0: irq 26, io mem 0x400000100000
ohci_hcd 0000:00:02.0: resetting from state 'reset', control = 0x0
ohci_hcd 0000:00:02.0: device removed!
ohci_hcd 0000:00:02.0: HC died; cleaning up
ohci_hcd 0000:00:02.0: OHCI controller state
ohci_hcd 0000:00:02.0: OHCI 3.15, NO legacy support registers
ohci_hcd 0000:00:02.0: control 0xffffffff RWE RWC IR HCFS=suspend BLE CLE IE PLE CBSR=3
ohci_hcd 0000:00:02.0: cmdstatus 0xffffffff SOC=3 OCR BLF CLF HCR
ohci_hcd 0000:00:02.0: device removed!
ohci_hcd 0000:00:02.0: intrstatus 0xffffffff MIE OC RHSC FNO UE RD SF WDH SO
ohci_hcd 0000:00:02.0: intrenable 0xffffffff MIE OC RHSC FNO UE RD SF WDH SO
ohci_hcd 0000:00:02.0: HC died; cleaning up
ohci_hcd 0000:00:02.0: ed_periodcurrent ffffffff
ohci_hcd 0000:00:02.0: ed_controlhead ffffffff
ohci_hcd 0000:00:02.0: ed_controlcurrent ffffffff
ohci_hcd 0000:00:02.0: ed_bulkhead ffffffff
ohci_hcd 0000:00:02.0: ed_bulkcurrent ffffffff
ohci_hcd 0000:00:02.0: donehead ffffffff
ohci_hcd 0000:00:02.0: hcca frame #0000
ohci_hcd 0000:00:02.0: can't read usb3 device descriptor -108
ohci_hcd 0000:00:02.0: stop operational controller (state 0x00)
ohci_hcd 0000:00:02.0: OHCI controller state
ohci_hcd 0000:00:02.0: OHCI 3.15, NO legacy support registers
ohci_hcd 0000:00:02.0: control 0xffffffff RWE RWC IR HCFS=suspend BLE CLE IE PLE CBSR=3
ohci_hcd 0000:00:02.0: cmdstatus 0xffffffff SOC=3 OCR BLF CLF HCR
ohci_hcd 0000:00:02.0: intrstatus 0xffffffff MIE OC RHSC FNO UE RD SF WDH SO
ohci_hcd 0000:00:02.0: intrenable 0xffffffff MIE OC RHSC FNO UE RD SF WDH SO
ohci_hcd 0000:00:02.0: ed_periodcurrent ffffffff
ohci_hcd 0000:00:02.0: ed_controlhead ffffffff
ohci_hcd 0000:00:02.0: ed_controlcurrent ffffffff
ohci_hcd 0000:00:02.0: ed_bulkhead ffffffff
ohci_hcd 0000:00:02.0: ed_bulkcurrent ffffffff
ohci_hcd 0000:00:02.0: donehead ffffffff
ohci_hcd 0000:00:02.0: hcca frame #0000
chip_mask:413: cpu 0, virq 26
ohci_hcd 0000:00:02.0: USB bus 3 deregistered
ehci_hcd 0000:00:01.1: port 2 resume error -19
hub 1-0:1.0: hub_port_status failed (err = -32)
hub 1-0:1.0: port_wait_reset: err = -32
hub 1-0:1.0: port 2 not enabled, trying reset again...
hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
ohci_hcd 0000:00:02.0: init 0000:00:02.0 fail, -108
ohci_hcd: probe of 0000:00:02.0 failed with error -108
ehci_hcd 0000:00:01.1: port 2 resume error -19
hub 1-0:1.0: hub_port_status failed (err = -32)
hub 1-0:1.0: port_wait_reset: err = -32
hub 1-0:1.0: port 2 not enabled, trying reset again...
ehci_hcd 0000:00:01.1: port 2 resume error -19
hub 1-0:1.0: hub_port_status failed (err = -32)
hub 1-0:1.0: port_wait_reset: err = -32
hub 1-0:1.0: port 2 not enabled, trying reset again...
ehci_hcd 0000:00:01.1: port 2 resume error -19
hub 1-0:1.0: hub_port_status failed (err = -32)
hub 1-0:1.0: port_wait_reset: err = -32
hub 1-0:1.0: port 2 not enabled, trying reset again...
ehci_hcd 0000:00:01.1: port 2 resume error -19
hub 1-0:1.0: hub_port_status failed (err = -32)
hub 1-0:1.0: port_wait_reset: err = -32
hub 1-0:1.0: port 2 not enabled, trying reset again...
ehci_hcd 0000:00:01.1: port 2 resume error -19
hub 1-0:1.0: hub_port_status failed (err = -32)
hub 1-0:1.0: port_wait_reset: err = -32
hub 1-0:1.0: port 2 not enabled, trying reset again...
hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0006
ehci_hcd 0000:00:02.1: port 1 resume error -19
hub 2-0:1.0: hub_port_status failed (err = -32)
ehci_hcd 0000:00:02.1: port 2 resume error -19
hub 2-0:1.0: hub_port_status failed (err = -32)
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
-> ps3_register_known_devices:450
-> ps3_register_ehci_0:276
ps3_system_bus_device_register:342 add sb_01
ps3_system_bus_match:90: dev=1(sb_01), drv=3(ps3_gelic_driver): miss
<- ps3_register_ehci_0:323
-> ps3_register_ohci_0:117
ps3_system_bus_device_register:342 add sb_02
ps3_system_bus_match:90: dev=2(sb_02), drv=3(ps3_gelic_driver): miss
<- ps3_register_ohci_0:164
-> ps3_register_sys_manager:426
ps3_vuart vuart_02: ps3_vuart_match:742: dev=5(vuart_02), drv=4(ps3_av): miss
<- ps3_register_sys_manager:438
-> ps3_register_gelic:37
ps3_system_bus_device_register:342 add sb_03
ps3_system_bus_match:90: dev=3(sb_03), drv=3(ps3_gelic_driver): match
dma_region_create:521: dev 1:0
dma_region_create:521: page_size 16
dma_region_create:521: bus_addr c0000000h
dma_region_create:521: len f800000h
eth0: Gelic Network Driver
eth0: Ethernet Address: 00:15:C1:D0:DA:4C
vlan_id:0, 124
vlan_id:1, 126
vlan_id:2, 127
vlan_id:3, 123
<- ps3_register_gelic:88
<- ps3_register_known_devices:461
-> ps3_sys_manager_init:68
ps3_vuart vuart_02: ps3_vuart_match:742: dev=5(vuart_02), drv=5(ps3_sys_manager): match
-> ps3_sys_manager_probe:41
<- ps3_sys_manager_probe:42
<- ps3_sys_manager_init:72
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
-> ps3_register_other_devices:470
<- ps3_register_other_devices:473
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 256k freed
usb 2-0:1.0: uevent
usb usb2: uevent
usb 1-0:1.0: uevent
usb usb1: uevent
EXT3 FS on sda1, internal journal
Unable to find swap-space signature
More information about the cbe-oss-dev
mailing list