[Cbe-oss-dev] ps3 experimental patches updated
Florin Malita
fmalita at gmail.com
Fri Jan 5 11:02:30 EST 2007
Geoff Levand wrote:
> I uploaded a new ps3 experimental patchset.
>
> As a temporary solution to provide users usb support, I
> forward ported the fake pci bus driver from the 2.6.16
> release. For this release, ether, graphics, storage and
> usb are working, but should be considered experimental.
>
> Look for ps3-linux-patches-06.12.14* here:
>
> http://www.kernel.org/pub/linux/kernel/people/geoff/cell/
>
I tried this against
powerpc.git/cc016448b0bf0764928275d034e367753bde8162 (from 12/14/2006)
but no luck with USB so far. Any ideas?
---
fm
...
Jan 4 00:00:28 psst kernel: sr0: scsi3-mmc drive: 4x/4x cd/rw xa/form2 cdda tray
Jan 4 00:00:28 psst kernel: Uniform CD-ROM driver Revision: 3.20
Jan 4 00:00:28 psst kernel: usb_hcd_pci_probe:127: rsrc_start 4000000f0000h
Jan 4 00:00:28 psst kernel: usb_hcd_pci_probe:128: rsrc_len 10000h
Jan 4 00:00:28 psst kernel: usb_hcd_pci_probe:129: regs d000080080480000h
Jan 4 00:00:28 psst kernel: usb_hcd_pci_probe:133: irq 25
Jan 4 00:00:28 psst kernel: ehci_hcd 0000:00:01.1: EHCI Host Controller
Jan 4 00:00:28 psst kernel: ehci_hcd 0000:00:01.1: new USB bus registered, assigned bus number 1
Jan 4 00:00:28 psst kernel: ehci_hcd 0000:00:01.1: irq 25, io mem 0x4000000f0000
Jan 4 00:00:28 psst kernel: ehci_hcd 0000:00:01.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jan 4 00:00:28 psst kernel: usb usb1: Product: EHCI Host Controller
Jan 4 00:00:28 psst kernel: usb usb1: Manufacturer: Linux 2.6.20-rc1 ehci_hcd
Jan 4 00:00:28 psst kernel: usb usb1: SerialNumber: 0000:00:01.1
Jan 4 00:00:28 psst kernel: usb usb1: configuration #1 chosen from 1 choice
Jan 4 00:00:28 psst kernel: hub 1-0:1.0: USB hub found
Jan 4 00:00:28 psst kernel: hub 1-0:1.0: 2 ports detected
Jan 4 00:00:28 psst kernel: usb_hcd_pci_probe:139: OK
Jan 4 00:00:28 psst kernel: usb_hcd_pci_probe:127: rsrc_start 400000110000h
Jan 4 00:00:28 psst kernel: usb_hcd_pci_probe:128: rsrc_len 10000h
Jan 4 00:00:28 psst kernel: usb_hcd_pci_probe:129: regs d000080080490000h
Jan 4 00:00:28 psst kernel: usb_hcd_pci_probe:133: irq 27
Jan 4 00:00:28 psst kernel: ehci_hcd 0000:00:02.1: EHCI Host Controller
Jan 4 00:00:28 psst kernel: ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
Jan 4 00:00:28 psst kernel: ehci_hcd 0000:00:02.1: irq 27, io mem 0x400000110000
Jan 4 00:00:28 psst kernel: ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jan 4 00:00:28 psst kernel: usb usb2: Product: EHCI Host Controller
Jan 4 00:00:28 psst kernel: usb usb2: Manufacturer: Linux 2.6.20-rc1 ehci_hcd
Jan 4 00:00:28 psst kernel: usb usb2: SerialNumber: 0000:00:02.1
Jan 4 00:00:28 psst kernel: usb usb2: configuration #1 chosen from 1 choice
Jan 4 00:00:28 psst kernel: hub 2-0:1.0: USB hub found
Jan 4 00:00:28 psst kernel: hub 2-0:1.0: 2 ports detected
Jan 4 00:00:28 psst kernel: usb 1-2: new high speed USB device using ehci_hcd and address 2
Jan 4 00:00:28 psst kernel: usb_hcd_pci_probe:139: OK
Jan 4 00:00:28 psst kernel: usb_hcd_pci_probe:127: rsrc_start 4000000e0000h
Jan 4 00:00:28 psst kernel: usb_hcd_pci_probe:128: rsrc_len 10000h
Jan 4 00:00:28 psst kernel: usb_hcd_pci_probe:129: regs d0000800804a0000h
Jan 4 00:00:28 psst kernel: usb_hcd_pci_probe:133: irq 24
Jan 4 00:00:28 psst kernel: ohci_hcd 0000:00:01.0: OHCI Host Controller
Jan 4 00:00:28 psst kernel: ohci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 3
Jan 4 00:00:28 psst kernel: ohci_hcd 0000:00:01.0: irq 24, io mem 0x4000000e0000
Jan 4 00:00:28 psst kernel: ohci_hcd 0000:00:01.0: USB HC reset timed out!
Jan 4 00:00:28 psst kernel: ohci_hcd 0000:00:01.0: can't start
Jan 4 00:00:28 psst kernel: ohci_hcd 0000:00:01.0: startup error -1
Jan 4 00:00:28 psst kernel: ohci_hcd 0000:00:01.0: USB bus 3 deregistered
Jan 4 00:00:28 psst kernel: ohci_hcd 0000:00:01.0: init 0000:00:01.0 fail, -1
Jan 4 00:00:28 psst kernel: ohci_hcd: probe of 0000:00:01.0 failed with error -1
Jan 4 00:00:28 psst kernel: usb_hcd_pci_probe:127: rsrc_start 400000100000h
Jan 4 00:00:28 psst kernel: usb_hcd_pci_probe:128: rsrc_len 10000h
Jan 4 00:00:28 psst kernel: usb_hcd_pci_probe:129: regs d0000800804a0000h
Jan 4 00:00:28 psst kernel: usb_hcd_pci_probe:133: irq 26
Jan 4 00:00:28 psst kernel: ohci_hcd 0000:00:02.0: OHCI Host Controller
Jan 4 00:00:28 psst kernel: ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
Jan 4 00:00:28 psst kernel: ohci_hcd 0000:00:02.0: irq 26, io mem 0x400000100000
Jan 4 00:00:28 psst kernel: ohci_hcd 0000:00:02.0: USB bus 3 deregistered
Jan 4 00:00:28 psst kernel: ohci_hcd 0000:00:02.0: init 0000:00:02.0 fail, -108
Jan 4 00:00:28 psst kernel: ohci_hcd: probe of 0000:00:02.0 failed with error -108
Jan 4 00:00:28 psst kernel: ehci_hcd 0000:00:01.1: port 2 resume error -19
Jan 4 00:00:28 psst kernel: hub 1-0:1.0: hub_port_status failed (err = -32)
Jan 4 00:00:28 psst kernel: ehci_hcd 0000:00:01.1: port 2 resume error -19
Jan 4 00:00:28 psst kernel: hub 1-0:1.0: hub_port_status failed (err = -32)
Jan 4 00:00:28 psst kernel: ehci_hcd 0000:00:01.1: port 2 resume error -19
Jan 4 00:00:28 psst kernel: hub 1-0:1.0: hub_port_status failed (err = -32)
Jan 4 00:00:28 psst kernel: ehci_hcd 0000:00:01.1: port 2 resume error -19
Jan 4 00:00:28 psst kernel: hub 1-0:1.0: hub_port_status failed (err = -32)
Jan 4 00:00:28 psst kernel: ehci_hcd 0000:00:01.1: port 2 resume error -19
Jan 4 00:00:28 psst kernel: hub 1-0:1.0: hub_port_status failed (err = -32)
Jan 4 00:00:28 psst kernel: hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
Jan 4 00:00:28 psst kernel: ehci_hcd 0000:00:01.1: port 2 resume error -19
Jan 4 00:00:28 psst kernel: hub 1-0:1.0: hub_port_status failed (err = -32)
Jan 4 00:00:28 psst kernel: ehci_hcd 0000:00:01.1: port 2 resume error -19
Jan 4 00:00:28 psst kernel: hub 1-0:1.0: hub_port_status failed (err = -32)
Jan 4 00:00:28 psst kernel: ehci_hcd 0000:00:01.1: port 2 resume error -19
Jan 4 00:00:28 psst kernel: hub 1-0:1.0: hub_port_status failed (err = -32)
Jan 4 00:00:28 psst kernel: ehci_hcd 0000:00:01.1: port 2 resume error -19
Jan 4 00:00:28 psst kernel: hub 1-0:1.0: hub_port_status failed (err = -32)
Jan 4 00:00:28 psst kernel: ehci_hcd 0000:00:01.1: port 2 resume error -19
Jan 4 00:00:28 psst kernel: hub 1-0:1.0: hub_port_status failed (err = -32)
Jan 4 00:00:28 psst kernel: hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
Jan 4 00:00:28 psst kernel: ehci_hcd 0000:00:01.1: port 2 resume error -19
Jan 4 00:00:28 psst kernel: hub 1-0:1.0: hub_port_status failed (err = -32)
Jan 4 00:00:28 psst kernel: ehci_hcd 0000:00:01.1: port 2 resume error -19
Jan 4 00:00:28 psst kernel: hub 1-0:1.0: hub_port_status failed (err = -32)
Jan 4 00:00:28 psst kernel: ehci_hcd 0000:00:01.1: port 2 resume error -19
Jan 4 00:00:28 psst kernel: hub 1-0:1.0: hub_port_status failed (err = -32)
Jan 4 00:00:28 psst kernel: ehci_hcd 0000:00:01.1: port 2 resume error -19
Jan 4 00:00:28 psst kernel: hub 1-0:1.0: hub_port_status failed (err = -32)
Jan 4 00:00:28 psst kernel: ehci_hcd 0000:00:01.1: port 2 resume error -19
Jan 4 00:00:28 psst kernel: hub 1-0:1.0: hub_port_status failed (err = -32)
Jan 4 00:00:28 psst kernel: hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
Jan 4 00:00:28 psst kernel: ehci_hcd 0000:00:01.1: port 2 resume error -19
Jan 4 00:00:28 psst kernel: hub 1-0:1.0: hub_port_status failed (err = -32)
Jan 4 00:00:28 psst kernel: ehci_hcd 0000:00:01.1: port 2 resume error -19
Jan 4 00:00:29 psst kernel: hub 1-0:1.0: hub_port_status failed (err = -32)
Jan 4 00:00:29 psst kernel: ehci_hcd 0000:00:01.1: port 2 resume error -19
Jan 4 00:00:29 psst kernel: hub 1-0:1.0: hub_port_status failed (err = -32)
Jan 4 00:00:29 psst kernel: ehci_hcd 0000:00:01.1: port 2 resume error -19
Jan 4 00:00:29 psst kernel: hub 1-0:1.0: hub_port_status failed (err = -32)
Jan 4 00:00:29 psst kernel: ehci_hcd 0000:00:01.1: port 2 resume error -19
Jan 4 00:00:29 psst kernel: hub 1-0:1.0: hub_port_status failed (err = -32)
Jan 4 00:00:29 psst kernel: hub 1-0:1.0: Cannot enable port 2. Maybe the USB cable is bad?
Jan 4 00:00:29 psst kernel: ehci_hcd 0000:00:02.1: port 1 resume error -19
Jan 4 00:00:29 psst kernel: usbcore: registered new interface driver usbhid
Jan 4 00:00:29 psst kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Jan 4 00:00:29 psst kernel: hub 2-0:1.0: hub_port_status failed (err = -32)
Jan 4 00:00:29 psst kernel: ehci_hcd 0000:00:02.1: port 2 resume error -19
Jan 4 00:00:29 psst kernel: hub 2-0:1.0: hub_port_status failed (err = -32)
Jan 4 00:00:29 psst kernel: mice: PS/2 mouse device common for all mice
Jan 4 00:00:29 psst kernel: ps3_system_bus_match:90: dev=1(sb_01), drv=3(ps3_gelic_driver): miss
Jan 4 00:00:29 psst kernel: ps3_system_bus_match:90: dev=2(sb_02), drv=3(ps3_gelic_driver): miss
Jan 4 00:00:29 psst kernel: ps3_vuart vuart_02: ps3_vuart_match:742: dev=5(vuart_02), drv=4(ps3_av): miss
Jan 4 00:00:29 psst kernel: ps3_system_bus_match:90: dev=3(sb_03), drv=3(ps3_gelic_driver): match
Jan 4 00:00:29 psst kernel: eth0: Gelic Network Driver
Jan 4 00:00:29 psst kernel: eth0: Ethernet Address: 00:15:C1:D0:DA:4C
...
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: .config
URL: <http://lists.ozlabs.org/pipermail/cbe-oss-dev/attachments/20070104/f8853007/attachment.asc>
More information about the cbe-oss-dev
mailing list