[Skiboot] [PATCH v4 4/5] Add SBE driver support

Vasant Hegde hegdevasant at linux.vnet.ibm.com
Tue Apr 18 18:53:31 AEST 2017


SBE (Self Boot Engine) on P9 has two different jobs:
  - Boot the chip up to the point the core is functional
  - Provide various services like timer, scom, etc., at runtime

OPAL can communicate to SBE via a set of data and control registers provided
by the PSU block in P9 chip.
 - Four 8 byte registers for Host to send command packets to SBE
 - Four 8 byte registers for SBE to send response packets to Host
 - Two doorbell registers (1 on each side) to alert either party
   when data is placed in above mentioned data register

Protocol constraints:
  Only one command is accepted in the command buffer until the response for the
  command is enqueued in the response buffer by SBE.

Usage:
  We will use SBE for various purposes like timer, sreset, MPIPL, etc.

This patch implements the SBE MBOX spec for OPAL to communicate with
SBE.

Design consideration:
  - SBE works on request - response basis. It will not send any notification
    without request.
  - Each chip has SBE. We need to track SBE messages per chip. Hence added
    per chip sbe structure and list of messages to that chip.
  - SBE accepts only one command at a time. Hence serialized MBOX commands.
  - OPAL gets interrupted once SBE sets doorbell register
  - OPAL has to clear doorbell register after reading response.
  - Every command class has timeout option. Timed out messages are discarded.
  - SBE MBOX commands can be classified into four types :
    - Those that must be sent to the master only (ex: sending MDST/MDDT info)
    - Those that must be sent to slaves only (ex: continue MPIPL)
    - Those that must be sent to all chips (ex: close insecure window)
    - Those that can be sent to any chip (ex: timer)

Signed-off-by: Vasant Hegde <hegdevasant at linux.vnet.ibm.com>
---
Testing:
  I have tested driver with timer chip op and its working fine.

 core/init.c      |   7 +
 hw/Makefile.inc  |   2 +-
 hw/psi.c         |   3 +-
 hw/sbe-p9.c      | 610 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
 include/chip.h   |   4 +
 include/sbe-p9.h | 228 +++++++++++++++++++++
 6 files changed, 852 insertions(+), 2 deletions(-)
 create mode 100644 hw/sbe-p9.c
 create mode 100644 include/sbe-p9.h

diff --git a/core/init.c b/core/init.c
index 6b8137c..d16d862 100644
--- a/core/init.c
+++ b/core/init.c
@@ -47,6 +47,7 @@
 #include <nvram.h>
 #include <libstb/stb.h>
 #include <libstb/container.h>
+#include <sbe-p9.h>
 
 enum proc_gen proc_gen;
 unsigned int pcie_max_link_speed;
@@ -897,6 +898,12 @@ void __noreturn __nomcount main_cpu_entry(const void *fdt)
 	 */
 	chiptod_init();
 
+	/*
+	 * SBE uses TB value for scheduling timer. Hence init after
+	 * chiptod init
+	 */
+	sbe_init();
+
 	/* Initialize i2c */
 	p8_i2c_init();
 
diff --git a/hw/Makefile.inc b/hw/Makefile.inc
index 1c48ab9..27babd2 100644
--- a/hw/Makefile.inc
+++ b/hw/Makefile.inc
@@ -7,7 +7,7 @@ HW_OBJS += p7ioc.o p7ioc-inits.o p7ioc-phb.o
 HW_OBJS += phb3.o sfc-ctrl.o fake-rtc.o bt.o p8-i2c.o prd.o
 HW_OBJS += dts.o lpc-rtc.o npu.o npu-hw-procedures.o xive.o phb4.o
 HW_OBJS += fake-nvram.o lpc-mbox.o npu2.o npu2-hw-procedures.o
-HW_OBJS += sbe-p8.o
+HW_OBJS += sbe-p8.o sbe-p9.o
 HW=hw/built-in.o
 
 # FIXME hack this for now
diff --git a/hw/psi.c b/hw/psi.c
index cc7db44..ccc3578 100644
--- a/hw/psi.c
+++ b/hw/psi.c
@@ -33,6 +33,7 @@
 #include <platform.h>
 #include <errorlog.h>
 #include <xive.h>
+#include <sbe-p9.h>
 
 static LIST_HEAD(psis);
 static u64 psi_link_timer;
@@ -603,7 +604,7 @@ static void psihb_p9_interrupt(struct irq_source *is, uint32_t isn)
 		printf("PSI: DIO irq received\n");
 		break;
 	case P9_PSI_IRQ_PSU:
-		printf("PSI: PSU irq received\n");
+		sbe_interrupt(psi->chip_id);
 		break;
 	}
 }
diff --git a/hw/sbe-p9.c b/hw/sbe-p9.c
new file mode 100644
index 0000000..88474ac
--- /dev/null
+++ b/hw/sbe-p9.c
@@ -0,0 +1,610 @@
+/* Copyright 2017 IBM Corp.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *	http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+ * implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define pr_fmt(fmt) "SBE: " fmt
+
+#include <chip.h>
+#include <errorlog.h>
+#include <lock.h>
+#include <opal.h>
+#include <sbe-p9.h>
+#include <skiboot.h>
+#include <timebase.h>
+#include <trace.h>
+#include <xscom.h>
+
+struct sbe {
+	/* Chip ID to send message */
+	u32	chip_id;
+
+	/* List to hold SBE queue messages */
+	struct list_head	msg_list;
+
+	struct lock lock;
+
+	/* SBE MBOX message sequence number */
+	u16	cur_seq;
+
+	/*
+	 * Sending messages to SBE is serialized. We can use
+	 * single buffer per SBE to hold response message.
+	 */
+	struct sbe_msg *resp;
+};
+
+/* Default SBE chip ID */
+static u32 sbe_default_chip_id = -1;
+
+#define SBE_STATUS_PRI_SHIFT	0x30
+#define SBE_STATUS_SEC_SHIFT	0x20
+#define SBE_FFDC_PRESENT	PPC_BIT(1)
+
+static inline bool sbe_ffdc_present(struct sbe_msg *resp)
+{
+	return (resp->reg[0] & SBE_FFDC_PRESENT);
+}
+
+/*
+ * bit 0    : PCBPIB status present in response
+ * bit 1    : FFDC package(s) present in response
+ * bit 2-3  : Reserved
+ * bit 4-15 : Primary status code
+ */
+static inline u16 sbe_get_primary_rc(struct sbe_msg *resp)
+{
+	return ((resp->reg[0] >> SBE_STATUS_PRI_SHIFT) & 0xfff);
+}
+
+static inline void sbe_set_primary_rc(struct sbe_msg *resp, u64 rc)
+{
+	resp->reg[0] |= (rc << SBE_STATUS_PRI_SHIFT);
+}
+
+static u64 sbe_rreg(u32 chip_id, u64 reg)
+{
+	u64 data = 0;
+
+	xscom_read(chip_id, reg, &data);
+	return be64_to_cpu(data);
+}
+
+static void sbe_reg_dump(u32 chip_id)
+{
+#define SBE_DUMP_REG_ONE(chip_id, x) \
+	prlog(PR_DEBUG, "  %20s: %llx\n", #x, sbe_rreg(chip_id, x));
+
+	prlog(PR_DEBUG, "MBOX register dump for chip : %x\n", chip_id);
+	SBE_DUMP_REG_ONE(chip_id, PSU_SBE_DOORBELL_REG_RW);
+	SBE_DUMP_REG_ONE(chip_id, PSU_HOST_SBE_MBOX_REG0);
+	SBE_DUMP_REG_ONE(chip_id, PSU_HOST_SBE_MBOX_REG1);
+	SBE_DUMP_REG_ONE(chip_id, PSU_HOST_SBE_MBOX_REG2);
+	SBE_DUMP_REG_ONE(chip_id, PSU_HOST_SBE_MBOX_REG3);
+	SBE_DUMP_REG_ONE(chip_id, PSU_HOST_DOORBELL_REG_RW);
+	SBE_DUMP_REG_ONE(chip_id, PSU_HOST_SBE_MBOX_REG4);
+	SBE_DUMP_REG_ONE(chip_id, PSU_HOST_SBE_MBOX_REG5);
+	SBE_DUMP_REG_ONE(chip_id, PSU_HOST_SBE_MBOX_REG6);
+	SBE_DUMP_REG_ONE(chip_id, PSU_HOST_SBE_MBOX_REG7);
+}
+
+static u64 sbe_get_cmdclass_timeout(u16 cmdclass)
+{
+	u8 class = (u8)(cmdclass >> 8) & 0xff;
+
+	switch (class) {
+	case SBE_MCLASS_CORE_STATE:
+	case SBE_MCLASS_TIMER:
+	case SBE_MCLASS_MPIPL:
+	case SBE_MCLASS_SECURITY:
+		return SBE_CMD_TIMEOUT_SHORT_MS;
+	case SBE_MCLASS_GENERIC:
+		if (cmdclass == SBE_CMD_QUIESCE_SBE) /* Special case */
+			return SBE_CMD_TIMEOUT_LONG_MS;
+		return SBE_CMD_TIMEOUT_SHORT_MS;
+	case SBE_MCLASS_SCOM:
+	case SBE_MCLASS_RING:
+		return SBE_CMD_TIMEOUT_LONG_MS;
+	default:
+		prlog(PR_ERR, "Invalid command class\n");
+		return 0;
+	}
+}
+
+void sbe_freemsg(struct sbe_msg *msg)
+{
+	free(msg);
+}
+
+static void sbe_fillmsg(struct sbe_msg *msg, u16 cmd,
+			u16 ctrl_flag, u64 reg1, u64 reg2, u64 reg3)
+{
+	bool response = !!(ctrl_flag & SBE_CMD_CTRL_RESP_REQ);
+
+	/* Seqence ID is filled by sbe_queue_msg() */
+	msg->reg[0] = ((u64)ctrl_flag << 32) | cmd;
+	msg->reg[1] = reg1;
+	msg->reg[2] = reg2;
+	msg->reg[3] = reg3;
+
+	prlog(PR_TRACE, "MBOX message :\n\t Reg0 : %llx\n\t "
+	      "Reg1 : %llx\n\t Reg2 : %llx\n\t Reg3 : %lld\n",
+	      msg->reg[0], msg->reg[1], msg->reg[2], msg->reg[3]);
+
+	msg->state = sbe_msg_unused;
+	msg->response = response;
+}
+
+/*
+ * Handles "command with direct data" format only.
+ *
+ * Note: All mbox messages of our interest uses direct data format.
+ *       If we need indirect data format then we have to enhance
+ *       this function.
+ */
+struct sbe_msg *sbe_mkmsg(u16 cmd, u16 ctrl_flag,
+			  u64 reg1, u64 reg2, u64 reg3)
+{
+	struct sbe_msg *msg;
+
+	msg = zalloc(sizeof(struct sbe_msg));
+	if (!msg) {
+		prlog(PR_ERR, "Failed to allocate memory for SBE message\n");
+		return NULL;
+	}
+
+	sbe_fillmsg(msg, cmd, ctrl_flag, reg1, reg2, reg3);
+	return msg;
+}
+
+static inline bool sbe_busy(struct sbe_msg *msg)
+{
+	switch (msg->state) {
+	case sbe_msg_unused:
+	case sbe_msg_queued:
+	case sbe_msg_response:
+	case sbe_msg_done:
+	case sbe_msg_timeout:
+	case sbe_msg_cancelled:
+		return false;
+	default:	/* + sbe_msg_sent, sbe_msg_wresp */
+		break;
+	}
+
+	return true;
+}
+
+/* Read SBE doorbell to confirm its ready to accept command. */
+static bool sbe_hw_ready(u32 chip_id)
+{
+	int rc;
+	u64 data;
+
+	rc = xscom_read(chip_id, PSU_SBE_DOORBELL_REG_RW, &data);
+	if (rc) {
+		prlog(PR_ERR, "Failed to read Host to SBE doorbell register "
+		      "[chip id = %x]\n", chip_id);
+		return false;
+	}
+
+	/* Waiting for SBE to process previous message */
+	if (data & HOST_SBE_MSG_WAITING)
+		return false;
+
+	return true;
+}
+
+static int sbe_msg_send(u32 chip_id, struct sbe_msg *msg)
+{
+	int rc, i;
+	u64 addr, *data;
+
+	addr = PSU_HOST_SBE_MBOX_REG0;
+	data = &msg->reg[0];
+
+	for (i = 0; i < NR_HOST_SBE_MBOX_REG; i++) {
+		rc = xscom_write(chip_id, addr, *data);
+		if (rc)
+			return rc;
+
+		addr++;
+		data++;
+	}
+
+	rc = xscom_write(chip_id, PSU_SBE_DOORBELL_REG_OR,
+			 HOST_SBE_MSG_WAITING);
+	if (rc == OPAL_SUCCESS)
+		msg->state = sbe_msg_sent;
+
+	return rc;
+}
+
+static int sbe_msg_receive(u32 chip_id, struct sbe_msg *resp)
+{
+	int i;
+	int rc = OPAL_SUCCESS;
+	u64 addr, *data;
+
+	addr = PSU_HOST_SBE_MBOX_REG4;
+	data = &resp->reg[0];
+
+	for (i = 0; i < NR_HOST_SBE_MBOX_REG; i++) {
+		rc = xscom_read(chip_id, addr, data);
+		if (rc)
+			return rc;
+
+		addr++;
+		data++;
+	}
+
+	return rc;
+}
+
+/* This is called with sbe->lock */
+static void sbe_msg_complete(struct sbe *sbe, struct sbe_msg *msg)
+{
+	prlog(PR_INSANE, "Completing msg [chip id = %x], reg0 : 0x%llx\n",
+	      sbe->chip_id, msg->reg[0]);
+
+	msg->state = sbe_msg_done;
+	if (msg->response)
+		msg->resp = sbe->resp;
+
+	list_del_from(&sbe->msg_list, &msg->link);
+
+	if (msg->complete) {
+		unlock(&sbe->lock);
+		msg->complete(msg);
+		lock(&sbe->lock);
+	}
+}
+
+/* This is called with sbe->lock */
+static void sbe_msg_send_complete(struct sbe *sbe, struct sbe_msg *msg)
+{
+	u64 timeout;
+
+	prlog(PR_INSANE, "Completing send [chip id = %x], reg0 : 0x%llx\n",
+	      sbe->chip_id, msg->reg[0]);
+
+	/* Need response */
+	if (msg->response) {
+		timeout = sbe_get_cmdclass_timeout(msg->reg[0] & 0xffff);
+		msg->timeout = mftb() + msecs_to_tb(timeout);
+		msg->state = sbe_msg_wresp;
+	} else {
+		sbe_msg_complete(sbe, msg);
+	}
+}
+
+static void sbe_poke_queue(struct sbe *sbe)
+{
+	int rc;
+	struct sbe_msg *msg;
+
+	if (list_empty(&sbe->msg_list))
+		return;
+
+	msg = list_top(&sbe->msg_list, struct sbe_msg, link);
+	if (sbe_busy(msg))
+		return;
+
+	if (!sbe_hw_ready(sbe->chip_id))
+		return;
+
+	/* Send message */
+	rc = sbe_msg_send(sbe->chip_id, msg);
+	if (rc) {
+		prlog(PR_ERR, "Failed to send message to SBE "
+		      "[chip id = %x]\n", sbe->chip_id);
+		sbe_set_primary_rc(sbe->resp, SBE_STATUS_PRI_GENERIC_ERR);
+		sbe_msg_complete(sbe, msg);
+	} else {
+		sbe_msg_send_complete(sbe, msg);
+	}
+
+	/*
+	 * Its safe to make recursive call here as its limited to sending
+	 * messages to SBE.
+	 */
+	sbe_poke_queue(sbe);
+}
+
+/*
+ * WARNING:
+ *         Only one command is accepted in the command buffer until the response
+ *         for the command is enqueued in the response buffer by SBE.
+ *
+ *         Head of msg_list contains in-flight message. Hence we should always
+ *         add new message to tail of the list.
+ */
+int sbe_queue_msg(u32 chip_id, struct sbe_msg *msg,
+		  void (*comp)(struct sbe_msg *msg))
+{
+	struct proc_chip *chip;
+	struct sbe *sbe;
+
+	if (!msg)
+		return OPAL_PARAMETER;
+
+	if (sbe_default_chip_id == -1)
+		return OPAL_HARDWARE;
+
+	/* Default to SBE on master chip */
+	if (chip_id == -1)
+		chip = get_chip(sbe_default_chip_id);
+	else
+		chip = get_chip(chip_id);
+
+	if (chip == NULL || chip->sbe == NULL)
+		return OPAL_INTERNAL_ERROR;
+
+	sbe = chip->sbe;
+
+	/* Set completion */
+	msg->complete = comp;
+	msg->state = sbe_msg_queued;
+
+	lock(&sbe->lock);
+	/* Update sequence number */
+	msg->reg[0] = msg->reg[0] | ((u64)sbe->cur_seq << 16);
+	sbe->cur_seq++;
+
+	/* Reset sequence number */
+	if (sbe->cur_seq == 0xffff)
+		sbe->cur_seq = 1;
+
+	/* Add message to queue */
+	list_add_tail(&sbe->msg_list, &msg->link);
+	sbe_poke_queue(sbe);
+	unlock(&sbe->lock);
+
+	return OPAL_SUCCESS;
+}
+
+int sbe_sync_msg(u32 chip_id, struct sbe_msg *msg, bool autofree)
+{
+	int rc = OPAL_SUCCESS;
+	struct proc_chip *chip;
+
+	chip = get_chip(chip_id);
+	if (chip == NULL || chip->sbe == NULL) {
+		rc = OPAL_PARAMETER;
+		goto free_msg;
+	}
+
+	rc = sbe_queue_msg(chip_id, msg, NULL);
+	if (rc)
+		goto free_msg;
+
+	while (msg->state != sbe_msg_done &&
+	       msg->state != sbe_msg_cancelled) {
+		time_wait_us(10);
+		sbe_poke_queue(chip->sbe);
+	}
+
+	if (msg->response)
+		rc = sbe_get_primary_rc(msg->resp);
+
+free_msg:
+	if (autofree)
+		sbe_freemsg(msg);
+
+	return rc;
+}
+
+int sbe_cancelmsg(u32 chip_id, struct sbe_msg *msg)
+{
+	struct proc_chip *chip;
+	struct sbe *sbe;
+
+	chip = get_chip(chip_id);
+	if (chip == NULL || chip->sbe == NULL)
+		return OPAL_PARAMETER;
+
+	sbe = chip->sbe;
+
+	lock(&sbe->lock);
+	if (msg->state != sbe_msg_queued) {
+		unlock(&sbe->lock);
+		return OPAL_BUSY;
+	}
+
+	list_del_from(&sbe->msg_list, &msg->link);
+	msg->state = sbe_msg_cancelled;
+	unlock(&sbe->lock);
+
+	return OPAL_SUCCESS;
+}
+
+static void sbe_handle_response(struct sbe *sbe)
+{
+	u16 send_seq, resp_seq;
+	int rc;
+	struct sbe_msg *msg;
+
+	if (list_empty(&sbe->msg_list))
+		return;
+
+	/* Clear response registers */
+	memset(sbe->resp, 0, sizeof(struct sbe_msg));
+
+	msg = list_top(&sbe->msg_list, struct sbe_msg, link);
+	rc = sbe_msg_receive(sbe->chip_id, sbe->resp);
+	if (rc != OPAL_SUCCESS) {
+		prlog(PR_ERR, "Failed to read response message "
+		      "[chip id = %x]\n", sbe->chip_id);
+		sbe_set_primary_rc(sbe->resp, SBE_STATUS_PRI_GENERIC_ERR);
+		sbe_msg_complete(sbe, msg);
+		return;
+	}
+
+	/* Update message state */
+	msg->state = sbe_msg_response;
+
+	/* Validate sequence number */
+	send_seq = (msg->reg[0] >> 16) & 0xffff;
+	resp_seq = (sbe->resp->reg[0] >> 16) & 0xffff;
+	if (send_seq != resp_seq) {
+		/*
+		 * XXX Reset SBE and repost message.
+		 *     Lets send sequence error to caller until SBE reset works.
+		 */
+		prlog(PR_ERR, "Invalid sequence id [chip id = %x]\n",
+		      sbe->chip_id);
+		sbe_set_primary_rc(sbe->resp, SBE_STATUS_PRI_SEQ_ERR);
+		sbe_msg_complete(sbe, msg);
+		return;
+	}
+
+	sbe_msg_complete(sbe, msg);
+}
+
+void sbe_interrupt(uint32_t chip_id)
+{
+	int rc;
+	u64 data;
+	struct proc_chip *chip;
+	struct sbe_msg *msg;
+	struct sbe *sbe;
+
+	chip = get_chip(chip_id);
+	if (chip == NULL || chip->sbe == NULL)
+		goto clr_interrupt;
+	sbe = chip->sbe;
+
+	/* Read doorbell register */
+	rc = xscom_read(chip_id, PSU_HOST_DOORBELL_REG_RW, &data);
+	if (rc) {
+		prlog(PR_ERR, "Failed to read SBE to Host doorbell register "
+		      "[chip id = %x]\n", chip_id);
+		sbe_reg_dump(chip_id);
+		goto clr_interrupt;
+	}
+
+	/* SBE came back from reset */
+	if (data & SBE_HOST_RESET) {
+		prlog(PR_NOTICE, "Came back from reset [chip id = %x]\n",
+		      chip_id);
+
+		/* Repost message */
+		lock(&sbe->lock);
+		if (!list_empty(&sbe->msg_list)) {
+			msg = list_top(&sbe->msg_list, struct sbe_msg, link);
+			msg->state = sbe_msg_queued;
+			sbe_poke_queue(sbe);
+		}
+		unlock(&sbe->lock);
+		goto clr_interrupt;
+	}
+
+	/* Handle SBE response */
+	if (data & SBE_HOST_RESPONSE_WAITING) {
+		lock(&sbe->lock);
+		sbe_handle_response(sbe);
+		sbe_poke_queue(sbe);
+		unlock(&sbe->lock);
+	}
+
+clr_interrupt:
+	/* Clears all the bits */
+	rc = xscom_write(chip_id, PSU_HOST_DOORBELL_REG_AND,
+			 SBE_HOST_RESPONSE_CLEAR);
+	if (rc) {
+		prlog(PR_ERR, "Failed to clear SBE to Host doorbell "
+		      "register [chip id = %x]\n", chip_id);
+	}
+}
+
+static void sbe_timeout_poll(void *user_data __unused)
+{
+	u64 now = mftb();
+	struct sbe *sbe;
+	struct sbe_msg *msg;
+	struct proc_chip *chip;
+
+	for_each_chip(chip) {
+		if (chip->sbe == NULL)
+			continue;
+
+		sbe = chip->sbe;
+		lock(&sbe->lock);
+		if (list_empty(&sbe->msg_list)) {
+			unlock(&sbe->lock);
+			continue;
+		}
+
+		msg = list_top(&sbe->msg_list, struct sbe_msg, link);
+		if (!sbe_busy(msg)) {	/* Message not yet sent to SBE */
+			unlock(&sbe->lock);
+			continue;
+		}
+
+		if (tb_compare(now, msg->timeout) != TB_AAFTERB) {
+			unlock(&sbe->lock);
+			continue;
+		}
+
+		/* Message timeout */
+		if (msg->resp) {
+			prlog(PR_ERR, "Message timeout [chip id = %x], "
+			      "Reg0 = %llx\n", sbe->chip_id, msg->reg[0]);
+			msg->resp->state = sbe_msg_timeout;
+			sbe_set_primary_rc(sbe->resp, SBE_STATUS_PRI_GENERIC_ERR);
+			sbe_reg_dump(sbe->chip_id);
+		}
+
+		sbe_msg_complete(sbe, msg);
+		sbe_poke_queue(sbe);
+		unlock(&sbe->lock);
+	}
+}
+
+void sbe_init(void)
+{
+	struct dt_node *xn;
+	struct proc_chip *chip;
+	struct sbe *sbe;
+
+	if (proc_gen < proc_gen_p9)
+		return;
+
+	dt_for_each_compatible(dt_root, xn, "ibm,xscom") {
+		sbe = zalloc(sizeof(struct sbe));
+		assert(sbe);
+		sbe->resp = zalloc(sizeof(struct sbe_msg));
+		assert(sbe->resp);
+		sbe->chip_id = dt_get_chip_id(xn);
+		sbe->cur_seq = 1;
+		list_head_init(&sbe->msg_list);
+		init_lock(&sbe->lock);
+
+		chip = get_chip(sbe->chip_id);
+		assert(chip);
+		chip->sbe = sbe;
+
+		if (dt_has_node_property(xn, "primary", NULL)) {
+			sbe_default_chip_id = sbe->chip_id;
+			prlog(PR_DEBUG, "Master chip id : %x\n", sbe->chip_id);
+		}
+	}
+
+	if (sbe_default_chip_id == -1) {
+		prlog(PR_ERR, "Master chip ID not found.\n");
+		return;
+	}
+
+	/* Initiate SBE timeout poller */
+	opal_add_poller(sbe_timeout_poll, NULL);
+}
diff --git a/include/chip.h b/include/chip.h
index 588db9f..91a8043 100644
--- a/include/chip.h
+++ b/include/chip.h
@@ -108,6 +108,7 @@ struct centaur_chip;
 struct mfsi;
 struct xive;
 struct lpcm;
+struct sbe;
 
 /* Chip type */
 enum proc_chip_type {
@@ -206,6 +207,9 @@ struct proc_chip {
 
 	/* Used by hw/xive.c */
 	struct xive		*xive;
+
+	/* Used by hw/sbe-p9.c */
+	struct sbe		*sbe;
 };
 
 extern uint32_t pir_to_chip_id(uint32_t pir);
diff --git a/include/sbe-p9.h b/include/sbe-p9.h
new file mode 100644
index 0000000..69da8eb
--- /dev/null
+++ b/include/sbe-p9.h
@@ -0,0 +1,228 @@
+/* Copyright 2017 IBM Corp.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *	http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+ * implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __SBE_P9_H
+#define __SBE_P9_H
+
+#include <bitutils.h>
+#include <ccan/list/list.h>
+#include <ccan/short_types/short_types.h>
+
+/*
+ * Timeout value for short running commands is 100 msecs and
+ * the timeout value for long running commands is 30 secs.
+ */
+#define SBE_CMD_TIMEOUT_SHORT_MS		100
+#define SBE_CMD_TIMEOUT_LONG_MS			(30 * 1000)
+
+/* Primary response status code */
+#define SBE_STATUS_PRI_SUCCESS			0x00
+#define SBE_STATUS_PRI_INVALID_CMD		0x01
+#define SBE_STATUS_PRI_INVALID_DATA		0x02
+#define SBE_STATUS_PRI_SEQ_ERR			0x03
+#define SBE_STATUS_PRI_INTERNAL_ERR		0x04
+#define SBE_STATUS_PRI_GENERIC_ERR		0xFE
+
+/* Secondary response status code */
+#define SBE_STATUS_SEC_SUCCESS			0x00
+#define SBE_STATUS_SEC_CMD_CLASS_UNSUPPORTED	0x01
+#define SBE_STATUS_SEC_CMD_UNSUPPORTED		0x02
+#define SBE_STATUS_SEC_INV_ADDR			0x03
+#define SBE_STATUS_SEC_INV_TARGET_TYPE		0x04
+#define SBE_STATUS_SEC_INV_TARGET_ID		0x05
+#define SBE_STATUS_SEC_TARGET_NOT_PRESENT	0x06
+#define SBE_STATUS_SEC_TARGET_NOT_FUNC		0x07
+#define SBE_STATUS_SEC_CMD_NOT_ALLOW		0x08
+#define SBE_STATUS_SEC_FUNC_NOT_SUPPORTED	0x09
+#define SBE_STATUS_SEC_GENERIC_ERR		0x0A
+#define SBE_STATUS_SEC_BLACKLIST_REG		0x0B
+#define SBE_STATUS_SEC_OS_FAILURE		0x0C
+#define SBE_STATUS_SEC_MBX_REG_FAILURE		0x0D
+#define SBE_STATUS_SEC_INSUFFICIENT_DATA	0x0E
+#define SBE_STATUS_SEC_EXCESS_DATA		0x0F
+#define SBE_STATUS_SEC_BUSY			0x10
+
+/* Number of MBOX register on each side */
+#define NR_HOST_SBE_MBOX_REG		0x04
+
+/*
+ * SBE MBOX register address
+ *   Reg 0 - 3 : Host to send command packets to SBE
+ *   Reg 4 - 7 : SBE to send response packets to Host
+ */
+#define PSU_HOST_SBE_MBOX_REG0		0x000D0050
+#define PSU_HOST_SBE_MBOX_REG1		0x000D0051
+#define PSU_HOST_SBE_MBOX_REG2		0x000D0052
+#define PSU_HOST_SBE_MBOX_REG3		0x000D0053
+#define PSU_HOST_SBE_MBOX_REG4		0x000D0054
+#define PSU_HOST_SBE_MBOX_REG5		0x000D0055
+#define PSU_HOST_SBE_MBOX_REG6		0x000D0056
+#define PSU_HOST_SBE_MBOX_REG7		0x000D0057
+#define PSU_SBE_DOORBELL_REG_RW		0x000D0060
+#define PSU_SBE_DOORBELL_REG_AND	0x000D0061
+#define PSU_SBE_DOORBELL_REG_OR		0x000D0062
+#define PSU_HOST_DOORBELL_REG_RW	0x000D0063
+#define PSU_HOST_DOORBELL_REG_AND	0x000D0064
+#define PSU_HOST_DOORBELL_REG_OR	0x000D0065
+
+/*
+ * Doorbell register to trigger SBE interrupt. Set by OPAL to inform
+ * the SBE about a waiting message in the Host/SBE mailbox registers
+ */
+#define HOST_SBE_MSG_WAITING		PPC_BIT(0)
+
+/*
+ * Doorbell register for host bridge interrupt. Set by the SBE to inform
+ * host about a response message in the Host/SBE mailbox registers
+ */
+#define SBE_HOST_RESPONSE_WAITING	PPC_BIT(0)
+#define SBE_HOST_MSG_READ		PPC_BIT(1)
+#define SBE_HOST_STOP15_EXIT		PPC_BIT(2)
+#define SBE_HOST_RESET			PPC_BIT(3)
+#define SBE_HOST_TIMER_EXPIRY		PPC_BIT(14)
+#define SBE_HOST_RESPONSE_CLEAR		0x00
+
+/* SBE Target Type */
+#define SBE_TARGET_TYPE_PROC		0x00
+#define SBE_TARGET_TYPE_EX		0x01
+#define SBE_TARGET_TYPE_PERV		0x02
+#define SBE_TARGET_TYPE_MCS		0x03
+#define SBE_TARGET_TYPE_EQ		0x04
+#define SBE_TARGET_TYPE_CORE		0x05
+
+/* SBE MBOX command class */
+#define SBE_MCLASS_FIRST		0xD1
+#define SBE_MCLASS_CORE_STATE		0xD1
+#define SBE_MCLASS_SCOM			0xD2
+#define SBE_MCLASS_RING			0xD3
+#define SBE_MCLASS_TIMER		0xD4
+#define SBE_MCLASS_MPIPL		0xD5
+#define SBE_MCLASS_SECURITY		0xD6
+#define SBE_MCLASS_GENERIC		0xD7
+#define SBE_MCLASS_LAST			0xD7
+
+/*
+ * Commands are provided in xxyy form where:
+ *   - xx : command class
+ *   - yy : command
+ *
+ * Both request and response message uses same seq ID,
+ * command class and command.
+ */
+#define SBE_CMD_CTRL_DEADMAN_LOOP	0xD101
+#define SBE_CMD_MULTI_SCOM		0xD201
+#define SBE_CMD_PUT_RING_FORM_IMAGE	0xD301
+#define SBE_CMD_CONTROL_TIMER		0xD401
+#define SBE_CMD_CONTINUE_MPIPL		0xD501
+#define SBE_CMD_GET_ARCHITECTED_REG	0xD502
+#define SBE_CMD_CLR_ARCHITECTED_REG	0xD503
+#define SBE_CMD_SET_UNSEC_MEM_WINDOW	0xD601
+#define SBE_CMD_GET_SBE_FFDC		0xD701
+#define SBE_CMD_GET_CAPABILITY		0xD702
+#define SBE_CMD_GET_FREQUENCIES		0xD703
+#define SBE_CMD_SET_FFDC_ADDR		0xD704
+#define SBE_CMD_QUIESCE_SBE		0xD705
+#define SBE_CMD_SET_FABRIC_ID_MAP	0xD706
+#define SBE_CMD_STASH_MPIPL_CONFIG	0xD707
+
+/* SBE MBOX control flags */
+
+/* Generic flags */
+#define SBE_CMD_CTRL_RESP_REQ		0x0100
+#define SBE_CMD_CTRL_ACK_REQ		0x0200
+
+/* Deadman loop */
+#define CTRL_DEADMAN_LOOP_START		0x0001
+#define CTRL_DEADMAN_LOOP_STOP		0x0002
+
+/* Control timer */
+#define CONTROL_TIMER_START		0x0001
+#define CONTROL_TIMER_STOP		0x0002
+
+/* SBE message state */
+enum sbe_msg_state {
+	sbe_msg_unused = 0,	/* Free */
+	sbe_msg_queued,		/* Queued to SBE list */
+	sbe_msg_sent,		/* Sent to SBE */
+	sbe_msg_wresp,		/* Waiting for response */
+	sbe_msg_response,	/* Got response */
+	sbe_msg_done,		/* Complete */
+	sbe_msg_timeout,	/* Message timeout */
+	sbe_msg_cancelled,	/* Message removed from queue */
+};
+
+/* SBE message */
+struct sbe_msg {
+	/*
+	 * Reg[0] :
+	 *   word0 :
+	 *     direct cmd  : reserved << 16 | ctrl flag
+	 *     indirect cmd: mem_addr_size_dword
+	 *     response    : primary status << 16 | secondary status
+	 *
+	 *   word1 : seq id << 16 | cmd class << 8 | cmd
+	 *
+	 * WARNING:
+	 *   - Don't populate reg[0].seq (byte 4,5). This will be populated by
+	 *     sbe_queue_msg().
+	 */
+	u64	reg[4];
+
+	/* cmd timout : mftb() + msecs_to_tb(SBE_CMD_TIMEOUT_[SHORT/LONG]MS) */
+	u64	timeout;
+
+	/* Completion function */
+	void (*complete)(struct sbe_msg *msg);
+	void *user_data;
+
+	/* Current msg state */
+	enum sbe_msg_state	state;
+
+	/* Set if the message expects a response */
+	bool			response;
+
+	/* Points to sbe->resp, which contains response message */
+	struct sbe_msg		*resp;
+
+	/* Internal queuing */
+	struct list_node	link;
+} __packed;
+
+
+/* Allocate and populate sbe_msg structure */
+extern struct sbe_msg *sbe_mkmsg(u16 cmd, u16 ctrl_flag, u64 reg1,
+				 u64 reg2, u64 reg3) __warn_unused_result;
+
+/* Free sbe_msg structure */
+extern void sbe_freemsg(struct sbe_msg *msg);
+
+/* Add new message to sbe queue */
+extern int sbe_queue_msg(uint32_t chip_id, struct sbe_msg *msg,
+		  void (*comp)(struct sbe_msg *msg)) __warn_unused_result;
+
+/* Synchronously send message to SBE */
+extern int sbe_sync_msg(u32 chip_id, struct sbe_msg *msg, bool autofree);
+
+/* Remove message from SBE queue, it will not remove inflight message */
+extern int sbe_cancelmsg(u32 chip_id, struct sbe_msg *msg);
+
+/* Initialize the SBE mailbox driver */
+extern void sbe_init(void);
+
+/* SBE interrupt */
+extern void sbe_interrupt(uint32_t chip_id);
+
+#endif	/* __SBE_P9_H */
-- 
2.9.3



More information about the Skiboot mailing list