From srinivasg at macil.in Sat Aug 2 17:58:13 2008 From: srinivasg at macil.in (srinivas) Date: Sat, 02 Aug 2008 13:28:13 +0530 Subject: [Fwd: OFW - Linux Boot] Message-ID: <1217663893.3136.18.camel@localhost.localdomain> HI, I have used a 2MB LPC flash on Chitra board insteard on 1MB. I dumped the CFE code in the Higher 1MB partition. On restart CFE is getting loaded, I get the CFE console and can execute the CFE commands without any problems. But when I try booting linux from my local hardisk, booting fails. The output across the debug port is as given below boot -ext2 sata0.0:/boot/vmlinux Loader:elf Filesys:ext2 Dev:sata0.0 File:/boot/vmlinux Options:(null) Loading: 0x0000000000000000/7811216 0x0000000000773090/700656 Entry at 0x0000000000000000 Starting program at 0x0000000000000000 [RUN!]console is uart0 OF stdout device is: /pxp at 0,e0000000/serial at 1d command line: root=/dev/sda2 memory layout at init: alloc_bottom : 0000000000830000 alloc_top : 0000000030000000 alloc_top_hi : 0000000040000000 rmo_top : 0000000030000000 ram_top : 0000000040000000 Looking for displays 0000000000000000 : boot cpu 0000000000000000 0000000000000001 : starting cpu hw idx 0000000000000001... Can you please tell me what the problem could be and also suggest the solution for the same. With this mail I am attaching 2 files devtree.txt - Output of the CFE command "show devtree" show_dev.txt - Output of the CFE command "show devices" Thanks & Regards G.Srinivas Gowda, MAC Telecom Technologies, Bangalore -------------- next part -------------- An HTML attachment was scrubbed... URL: From srinivasg at macil.in Sat Aug 2 17:56:05 2008 From: srinivasg at macil.in (srinivas) Date: Sat, 02 Aug 2008 13:26:05 +0530 Subject: OFW - Linux Boot Message-ID: <1217663765.3136.15.camel@localhost.localdomain> HI, I have used a 2MB LPC flash on Chitra board insteard on 1MB. I dumped the CFE code in the Higher 1MB partition. On restart CFE is getting loaded, I get the CFE console and can execute the CFE commands without any problems. But when I try booting linux from my local hardisk, booting fails. The output across the debug port is as given below boot -ext2 sata0.0:/boot/vmlinux Loader:elf Filesys:ext2 Dev:sata0.0 File:/boot/vmlinux Options:(null) Loading: 0x0000000000000000/7811216 0x0000000000773090/700656 Entry at 0x0000000000000000 Starting program at 0x0000000000000000 [RUN!]console is uart0 OF stdout device is: /pxp at 0,e0000000/serial at 1d command line: root=/dev/sda2 memory layout at init: alloc_bottom : 0000000000830000 alloc_top : 0000000030000000 alloc_top_hi : 0000000040000000 rmo_top : 0000000030000000 ram_top : 0000000040000000 Looking for displays 0000000000000000 : boot cpu 0000000000000000 0000000000000001 : starting cpu hw idx 0000000000000001... Can you please tell me what the problem could be and also suggest the solution for the same. With this mail I am attaching 2 files devtree.txt - Output of the CFE command "show devtree" show_dev.txt - Output of the CFE command "show devices" Thanks & Regards G.Srinivas Gowda, MAC Telecom Technologies, Bangalore -------------- next part -------------- An HTML attachment was scrubbed... URL: From olof at lixom.net Mon Aug 4 08:50:51 2008 From: olof at lixom.net (Olof Johansson) Date: Sun, 3 Aug 2008 17:50:51 -0500 Subject: [Fwd: OFW - Linux Boot] In-Reply-To: <1217663893.3136.18.camel@localhost.localdomain> References: <1217663893.3136.18.camel@localhost.localdomain> Message-ID: <20080803225051.GA29169@lixom.net> Hi, Please don't cross-post between the support mailing address and this list. On Sat, Aug 02, 2008 at 01:28:13PM +0530, srinivas wrote: > Looking for displays > 0000000000000000 : boot cpu 0000000000000000 > 0000000000000001 : starting cpu hw idx 0000000000000001... Is that the very last output? No [run1]? Then something bad happened when trying to spin up the second core. You didn't mention what version of CFE and linux you're trying to boot. Sounds like this is something for the official support, not for this mailing list. -Olof From srinivasg at macil.in Mon Aug 4 18:37:54 2008 From: srinivasg at macil.in (srinivas) Date: Mon, 04 Aug 2008 14:07:54 +0530 Subject: OFW - Linux Boot Message-ID: <1217839074.3109.27.camel@localhost.localdomain> HI, I have used a 2MB LPC flash on Chitra board instead on 1MB. I dumped the CFE code in the Higher 1MB partition. On restart CFE is getting loaded, I get the CFE console and can execute the CFE commands without any problems. But when I try booting linux from my local hardisk, booting fails. The output across the debug port is as given below boot -ext2 sata0.0:/boot/vmlinux Loader:elf Filesys:ext2 Dev:sata0.0 File:/boot/vmlinux Options:(null) Loading: 0x0000000000000000/7811216 0x0000000000773090/700656 Entry at 0x0000000000000000 Starting program at 0x0000000000000000 [RUN!]console is uart0 OF stdout device is: /pxp at 0,e0000000/serial at 1d command line: root=/dev/sda2 memory layout at init: alloc_bottom : 0000000000830000 alloc_top : 0000000030000000 alloc_top_hi : 0000000040000000 rmo_top : 0000000030000000 ram_top : 0000000040000000 Looking for displays 0000000000000000 : boot cpu 0000000000000000 0000000000000001 : starting cpu hw idx 0000000000000001... This is the last msg I get, sys hangs after this. LEDs displays RUN1 and remains like that until restarted. Can you please tell me what the problem could be and also suggest the solution for the same. With this mail I am attaching 2 files devtree.txt - Output of the CFE command "show devtree" show_dev.txt - Output of the CFE command "show devices" CFE Version : 1.2.5 Kernel Version 2.2.24 The same CFE image and kernel image run without any problem if booted from SPI flash. Thanks & Regards G.Srinivas Gowda, MAC Telecom Technologies, Bangalore -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- CFE> show devices Device Name Description ------------------- --------------------------------------------------------- uart0 NS16550 UART at 0xFCFF03F8 fan0 Analog Devices ADT7467 Fan Controller on SMBus channel 1 dev 0x2E eeprom0 Microchip 24LC128 EEPROM on SMBus channel 1 dev 0x50 eeprom1 Microchip 24LC128 EEPROM on SMBus channel 2 dev 0x56 eth0 PA Semi Ethernet (ge1) at 0xE00A1000 (02-00-E0-0A-10-00) eth1 PA Semi Ethernet (ge2) at 0xE00A2000 (02-00-E0-0A-20-00) eth2 PA Semi Ethernet (ge3) at 0xE00A3000 (02-00-E0-0A-30-00) flash0.os NOR flash at FFE00000 offset 00000000 size 1024KB flash0.boot NOR flash at FFE00000 offset 00100000 size 1024KB uart1 NS16550 UART at 0xFCFF02F8 clock0 Dallas DS1337C RTC on SMBus channel 1 dev 0x68 therm0 Analog Devices ADT7461 Thermal Sensor on SMBus channel 1 dev 0x4C adc0 Maxim MAX1238 12-channel ADC on SMBus channel 2 dev 0x31 sata0.0 Marvell 60xx disk unit 0 at 80100000 cf0 CompactFlash ATA disk unit 0 at 0xF0000000 usbdisk0 USB Disk unit 0 usbdisk1 USB Disk unit 1 usbdisk2 USB Disk unit 2 usbdisk3 USB Disk unit 3 -------------- next part -------------- show devtree [/] | #interrupt-cells val 0x00000002 | #address-cells val 0x00000002 | #size-cells val 0x00000002 | model str 'pasemi,chitra' | name str 'pasemi,chitra' | device_type str 'bootrom' | compatible str 'pasemi,chitra' 'pasemi,pa6t-1682m' 'PA6T-1682M' 'pasemi,pwrficient' 'pasemi' | platform-open-pic cell 00000000 FC000000 00000000 FC041000 [options] | name str 'options' | little-endian? val 0x00000000 | BOOT_CONSOLE str 'uart0' | debug root str 'nfs nfsroot=192.168.52.3:/netboot/,nolock ip=192.168.52.160:192.168.52.3:192.168.52.1:255.255.255.0:hai:eth0:auto=Minicom2.00.0Minicom2.00.0Minicom2.00.0' | DOG str '16' | STARTUP str 'set pmu -astate=a4 ; boot -ext2 sata0.0,1:/boot/vmlinuxint' | LOG str 'abcdefgoia' | DOG_STATE str 'disable' | bootargs str 'root=/dev/sda2' | CFE_VERSION str 'PAS-2.0.25' | CFE_BOARDNAME str 'CHITRA' | CFE_MEMORYSIZE str '1024' [openprom] | name str 'openprom' | device_type str 'BootROM' | model str 'Open Firmware 3' [sdc at fc000000] | name str 'sdc' | device_type str 'sdc' | #address-cells val 0x00000001 | #size-cells val 0x00000001 | compatible str '1682m-sdc' 'pasemi,pwrficient-sdc' 'pasemi,sdc' | reg cell 00000000 FC000000 00000000 00800000 [openpic at fc000000] | name str 'openpic' | device_type str 'open-pic' | compatible str 'pasemi,pwrficient-openpic' 'chrp,open-pic' | interrupt-controller blob | #address-cells val 0x00000000 | #interrupt-cells val 0x00000002 | msi-available-ranges cell 00000200 00000200 | reg cell FC000000 00100000 | nmi-source val 0x00000000 [gpio at fc103000] | name str 'gpio' | device_type str 'gpio' | compatible str '1682m-gpio' 'pasemi,pwrficient-gpio' 'pasemi,gpio' | reg cell FC103000 00001000 [gizmo at fc104000] | name str 'gizmo' | device_type str 'gizmo' | compatible str '1682m-gizmo' 'pasemi,pwrficient-gizmo' 'pasemi,gizmo' | reg cell FC104000 00001000 [rng at fc105000] | name str 'rng' | device_type str 'rng' | compatible str '1682m-rng' 'pasemi,pwrficient-rng' 'pasemi,rng' | reg cell FC105000 00001000 [mdio at 0] | name str 'mdio' | compatible str 'gpio-mdio' | #address-cells val 0x00000001 | #size-cells val 0x00000000 | mdc-pin val 0x0000000E | mdio-pin val 0x0000000F | reg cell 00000000 00000000 [ethernet-phy at a] | name str 'ethernet-phy' | reg val 0x0000000A | interrupt-parent val 0x3FF87058 | interrupts cell 0000000A 00000001 [ethernet-phy at 6] | name str 'ethernet-phy' | reg val 0x00000006 | interrupt-parent val 0x3FF87058 | interrupts cell 0000000A 00000001 [ethernet-phy at 2] | name str 'ethernet-phy' | reg val 0x00000002 | interrupt-parent val 0x3FF87058 | interrupts cell 0000000A 00000001 [pxp at 0,e0000000] | name str 'pxp' | device_type str 'pci' | #interrupt-cells val 0x00000001 | #address-cells val 0x00000003 | #size-cells val 0x00000002 | model str 'pa' | compatible str 'pasemi,rootbus' 'pa-pxp' | interrupt-map-mask cell 00000000 00000000 00000000 000000FF | interrupt-map cell 00000000 00000000 00000000 00000030 3FF87058 00000030 00000001 00000000 00000000 00000000 00000031 3FF87058 00000031 00000001 00000000 00000000 00000000 00000032 3FF87058 00000032 00000001 00000000 00000000 00000000 00000033 3FF87058 00000033 00000001 | bus-range cell 00000000 000000FF | ranges cell 00000000 00000000 E0000000 00000000 E0000000 00000000 10000000 01000000 00000000 00000000 00000000 FC800000 00000000 00800000 02000000 00000000 80000000 00000000 80000000 00000000 60000000 02000000 00000000 E0000000 00000000 E0000000 00000000 00100000 02000000 00000000 FD800000 00000000 FD800000 00000000 00001000 | reg cell 00000000 E0000000 00000000 10000000 [serial at 1d] | name str 'serial' | device_type str 'serial' | vendor-id val 0x00001959 | device-id val 0x0000A004 | revision-id val 0x00000002 | class-code val 0x00070003 | reg cell 0000E800 00000000 00000000 00000000 00000000 0100E810 00000000 00000000 00000000 00000008 | assigned-addresses cell 8100E810 00000000 007F03F8 00000000 00000008 | interrupt-parent val 0x3FF87058 | interrupts cell 00000049 00000001 | clock-frequency val 0x07F28155 | current-speed val 0x0001C200 | compatible str 'ns16550' 'pciclass,0700' [serial at 1d,1] | name str 'serial' | device_type str 'serial' | vendor-id val 0x00001959 | device-id val 0x0000A004 | revision-id val 0x00000002 | class-code val 0x00070003 | reg cell 0000E900 00000000 00000000 00000000 00000000 0100E910 00000000 00000000 00000000 00000008 | assigned-addresses cell 8100E910 00000000 007F02F8 00000000 00000008 | interrupt-parent val 0x3FF87058 | interrupts cell 0000004A 00000001 | clock-frequency val 0x07F28155 | current-speed val 0x0001C200 | compatible str 'ns16550' 'pciclass,0700' [dma-engine at 1a] | name str 'dma-engine' | device_type str 'dma-engine' | vendor-id val 0x00001959 | device-id val 0x0000A007 | revision-id val 0x00000011 | class-code val 0x000801FF | reg cell 0000D000 00000000 00000000 00000000 00000000 82000000 00000000 E00D0000 00000000 00001000 | assigned-addresses cell 82000000 00000000 E00D0000 00000000 00001000 | interrupt-parent val 0x3FF87058 | interrupts cell 00000080 00000001 | compatible str '1682m-dma' 'pasemi,dma-engine' [io-bridge at 0] | name str 'io-bridge' | device_type str 'io-bridge' | vendor-id val 0x00001959 | device-id val 0x0000A001 | revision-id val 0x00000011 | class-code val 0x00060000 | reg cell 00000000 00000000 00000000 00000000 00000000 82000000 00000000 E0000000 00000000 00002000 C2000000 00000000 FD800000 00000000 00001000 | assigned-addresses cell 82000000 00000000 E0000000 00000000 00002000 C2000000 00000000 FD800000 00000000 00001000 | interrupt-parent val 0x3FF87058 | interrupts cell 00000056 00000001 | compatible str 'pasemi,1682m-iob' 'pasemi,io-bridge' [cache-controller at 1] | name str 'cache-controller' | device_type str 'cache-controller' | vendor-id val 0x00001959 | device-id val 0x0000A009 | revision-id val 0x00000011 | class-code val 0x00058000 | reg cell 00000800 00000000 00000000 00000000 00000000 | interrupt-parent val 0x3FF87058 | interrupts cell 00000052 00000001 | compatible str 'pasemi,1682m-l2c' 'pasemi,l2c' [ethernet at 14,1] | name str 'ethernet' | device_type str 'ethernet' | vendor-id val 0x00001959 | device-id val 0x0000A005 | revision-id val 0x00000011 | class-code val 0x00020000 | reg cell 0000A100 00000000 00000000 00000000 00000000 82000000 00000000 E00A1000 00000000 00001000 | assigned-addresses cell 82000000 00000000 E00A1000 00000000 00001000 | interrupt-parent val 0x3FF87058 | interrupts cell 00000041 00000001 | local-mac-address blob 02 00 E0 0A 10 00 | compatible str 'pasemi,1682m-gmac' 'pasemi,ethernet' | phy-handle val 0x3FF925F8 [ethernet at 14,2] | name str 'ethernet' | device_type str 'ethernet' | vendor-id val 0x00001959 | device-id val 0x0000A005 | revision-id val 0x00000011 | class-code val 0x00020000 | reg cell 0000A200 00000000 00000000 00000000 00000000 82000000 00000000 E00A2000 00000000 00001000 | assigned-addresses cell 82000000 00000000 E00A2000 00000000 00001000 | interrupt-parent val 0x3FF87058 | interrupts cell 00000042 00000001 | local-mac-address blob 02 00 E0 0A 20 00 | compatible str 'pasemi,1682m-gmac' 'pasemi,ethernet' | phy-handle val 0x3FF92800 [ethernet at 14,3] | name str 'ethernet' | device_type str 'ethernet' | vendor-id val 0x00001959 | device-id val 0x0000A005 | revision-id val 0x00000011 | class-code val 0x00020000 | reg cell 0000A300 00000000 00000000 00000000 00000000 82000000 00000000 E00A3000 00000000 00001000 | assigned-addresses cell 82000000 00000000 E00A3000 00000000 00001000 | interrupt-parent val 0x3FF87058 | interrupts cell 00000043 00000001 | local-mac-address blob 02 00 E0 0A 30 00 | compatible str 'pasemi,1682m-gmac' 'pasemi,ethernet' | phy-handle val 0x3FF92A08 [i2c at 1c] | name str 'i2c' | device_type str 'i2c' | vendor-id val 0x00001959 | device-id val 0x0000A003 | revision-id val 0x00000001 | class-code val 0x000C0500 | reg cell 0000E000 00000000 00000000 00000000 00000000 0100E010 00000000 00000000 00000000 00000040 | assigned-addresses cell 8100E010 00000000 007F0200 00000000 00000040 | interrupt-parent val 0x3FF87058 | interrupts cell 00000046 00000001 [i2c at 1c,1] | name str 'i2c' | device_type str 'i2c' | vendor-id val 0x00001959 | device-id val 0x0000A003 | revision-id val 0x00000001 | class-code val 0x000C0500 | reg cell 0000E100 00000000 00000000 00000000 00000000 0100E110 00000000 00000000 00000000 00000040 | assigned-addresses cell 8100E110 00000000 007F0240 00000000 00000040 | interrupt-parent val 0x3FF87058 | interrupts cell 00000047 00000001 [rtc at 68] | name str 'rtc' | device_type str 'rtc' | compatible str 'dallas,ds1338' | reg val 0x00000068 [eeprom at 50] | name str 'eeprom' | compatible str 'MCHP,24lc128est' 'MCHP,24xx128' '24c128' | reg val 0x00000050 [temp-sensor at 4c] | name str 'temp-sensor' | compatible str 'adi,adt7461' | reg val 0x0000004C [temp-sensor at 2e] | name str 'temp-sensor' | compatible str 'adi,adt7467' | reg val 0x0000002E [i2c at 1c,2] | name str 'i2c' | device_type str 'i2c' | vendor-id val 0x00001959 | device-id val 0x0000A003 | revision-id val 0x00000001 | class-code val 0x000C0500 | reg cell 0000E200 00000000 00000000 00000000 00000000 0100E210 00000000 00000000 00000000 00000040 | assigned-addresses cell 8100E210 00000000 007F0280 00000000 00000040 | interrupt-parent val 0x3FF87058 | interrupts cell 00000048 00000001 [mux at 70] | name str 'mux' | compatible str 'PHG,pca9547' | reg val 0x00000070 [pci at 11,2] | name str 'pci' | device_type str 'pci' | vendor-id val 0x00001959 | device-id val 0x0000A002 | revision-id val 0x00000011 | class-code val 0x00060400 | #address-cells val 0x00000003 | #size-cells val 0x00000002 | #interrupt-cells val 0x00000001 | bus-range cell 00000007 00000008 | reg cell 00008A00 00000000 00000000 00000000 00000000 | ranges cell 02000000 00000000 80200000 02000000 00000000 80200000 00000000 00200000 [pci at 0] | name str 'pci' | device_type str 'pci' | vendor-id val 0x000010B5 | device-id val 0x00008111 | revision-id val 0x00000021 | class-code val 0x00060400 | #address-cells val 0x00000003 | #size-cells val 0x00000002 | #interrupt-cells val 0x00000001 | bus-range cell 00000008 00000008 | reg cell 00070000 00000000 00000000 00000000 00000000 42070010 00000000 00000000 00000000 00010000 | assigned-addresses cell C2070010 00000000 80200000 00000000 00010000 | ranges cell 02000000 00000000 80300000 02000000 00000000 80300000 00000000 00100000 [pci at 1] | name str 'pci' | device_type str 'pci' | vendor-id val 0x00001033 | device-id val 0x00000035 | revision-id val 0x00000043 | class-code val 0x000C0310 | subsystem-vendor-id val 0x00001033 | subsystem-id val 0x00000035 | reg cell 00080800 00000000 00000000 00000000 00000000 02080810 00000000 00000000 00000000 00001000 | assigned-addresses cell 82080810 00000000 80301000 00000000 00001000 | interrupt-parent val 0x3FF87058 | interrupts cell 00000032 00000001 [pci at 1,1] | name str 'pci' | device_type str 'pci' | vendor-id val 0x00001033 | device-id val 0x00000035 | revision-id val 0x00000043 | class-code val 0x000C0310 | subsystem-vendor-id val 0x00001033 | subsystem-id val 0x00000035 | reg cell 00080900 00000000 00000000 00000000 00000000 02080910 00000000 00000000 00000000 00001000 | assigned-addresses cell 82080910 00000000 80300000 00000000 00001000 | interrupt-parent val 0x3FF87058 | interrupts cell 00000033 00000001 [pci at 1,2] | name str 'pci' | device_type str 'pci' | vendor-id val 0x00001033 | device-id val 0x000000E0 | revision-id val 0x00000004 | class-code val 0x000C0320 | subsystem-vendor-id val 0x00001033 | subsystem-id val 0x000000E0 | reg cell 00080A00 00000000 00000000 00000000 00000000 02080A10 00000000 00000000 00000000 00000100 | assigned-addresses cell 82080A10 00000000 80302000 00000000 00000100 | interrupt-parent val 0x3FF87058 | interrupts cell 00000030 00000001 [pci at 11] | name str 'pci' | device_type str 'pci' | vendor-id val 0x00001959 | device-id val 0x0000A002 | revision-id val 0x00000011 | class-code val 0x00060400 | #address-cells val 0x00000003 | #size-cells val 0x00000002 | #interrupt-cells val 0x00000001 | bus-range cell 00000005 00000005 | reg cell 00008800 00000000 00000000 00000000 00000000 [pci at 10,3] | name str 'pci' | device_type str 'pci' | vendor-id val 0x00001959 | device-id val 0x0000A002 | revision-id val 0x00000011 | class-code val 0x00060400 | #address-cells val 0x00000003 | #size-cells val 0x00000002 | #interrupt-cells val 0x00000001 | bus-range cell 00000004 00000004 | reg cell 00008300 00000000 00000000 00000000 00000000 [pci at 10,2] | name str 'pci' | device_type str 'pci' | vendor-id val 0x00001959 | device-id val 0x0000A002 | revision-id val 0x00000011 | class-code val 0x00060400 | #address-cells val 0x00000003 | #size-cells val 0x00000002 | #interrupt-cells val 0x00000001 | bus-range cell 00000003 00000003 | reg cell 00008200 00000000 00000000 00000000 00000000 | ranges cell 01000000 00000000 00001000 01000000 00000000 00001000 00000000 00001000 02000000 00000000 80100000 02000000 00000000 80100000 00000000 00100000 [pci at 0] | name str 'pci' | device_type str 'pci' | vendor-id val 0x000011AB | device-id val 0x00007042 | revision-id val 0x00000002 | class-code val 0x00010000 | subsystem-vendor-id val 0x000011AB | subsystem-id val 0x000011AB | reg cell 00030000 00000000 00000000 00000000 00000000 02030010 00000000 00000000 00000000 00100000 01030018 00000000 00000000 00000000 00000100 | assigned-addresses cell 82030010 00000000 80100000 00000000 00100000 81030018 00000000 00001000 00000000 00000100 | interrupt-parent val 0x3FF87058 | interrupts cell 00000032 00000001 [pci at 10] | name str 'pci' | device_type str 'pci' | vendor-id val 0x00001959 | device-id val 0x0000A002 | revision-id val 0x00000011 | class-code val 0x00060400 | #address-cells val 0x00000003 | #size-cells val 0x00000002 | #interrupt-cells val 0x00000001 | bus-range cell 00000001 00000001 | reg cell 00008000 00000000 00000000 00000000 00000000 [pci at 3] | name str 'pci' | device_type str 'pci' | vendor-id val 0x00001959 | device-id val 0x0000A00C | revision-id val 0x00000011 | class-code val 0x00080080 | reg cell 00001800 00000000 00000000 00000000 00000000 | interrupt-parent val 0x3FF87058 | interrupts cell 00000054 00000001 [pci at 4] | name str 'pci' | device_type str 'pci' | vendor-id val 0x00001959 | device-id val 0x0000A00A | revision-id val 0x00000011 | class-code val 0x00050000 | reg cell 00002000 00000000 00000000 00000000 00000000 | interrupt-parent val 0x3FF87058 | interrupts cell 00000058 00000001 [pci at 5] | name str 'pci' | device_type str 'pci' | vendor-id val 0x00001959 | device-id val 0x0000A00A | revision-id val 0x00000011 | class-code val 0x00050000 | reg cell 00002800 00000000 00000000 00000000 00000000 | interrupt-parent val 0x3FF87058 | interrupts cell 0000005A 00000001 [pci at 8] | name str 'pci' | device_type str 'pci' | vendor-id val 0x00001959 | device-id val 0x0000A000 | revision-id val 0x00000011 | class-code val 0x000B2000 | reg cell 00004000 00000000 00000000 00000000 00000000 [pci at 9] | name str 'pci' | device_type str 'pci' | vendor-id val 0x00001959 | device-id val 0x0000A000 | revision-id val 0x00000011 | class-code val 0x000B2000 | reg cell 00004800 00000000 00000000 00000000 00000000 [pci at 15] | name str 'pci' | device_type str 'pci' | vendor-id val 0x00001959 | device-id val 0x0000A006 | revision-id val 0x00000011 | class-code val 0x00020000 | reg cell 0000A800 00000000 00000000 00000000 00000000 82000000 00000000 E00A8000 00000000 00001000 | assigned-addresses cell 82000000 00000000 E00A8000 00000000 00001000 | interrupt-parent val 0x3FF87058 | interrupts cell 00000044 00000001 [pci at 1b] | name str 'pci' | device_type str 'pci' | vendor-id val 0x00001959 | device-id val 0x0000A00B | revision-id val 0x00000011 | class-code val 0x00088000 | reg cell 0000D800 00000000 00000000 00000000 00000000 [pci at 1e] | name str 'pci' | device_type str 'pci' | vendor-id val 0x00001959 | device-id val 0x0000A008 | revision-id val 0x00000011 | class-code val 0x000601FF | reg cell 0000F000 00000000 00000000 00000000 00000000 0100F010 00000000 00000000 00000000 00000100 0100F014 00000000 00000000 00000000 00000100 | assigned-addresses cell 8100F010 00000000 007F0400 00000000 00000100 8100F014 00000000 007F0500 00000000 00000100 | interrupt-parent val 0x3FF87058 | interrupts cell 00000051 00000001 [cpus] | name str 'cpus' | #address-cells val 0x00000001 | #size-cells val 0x00000000 [PowerPC,PA6T at 0] | name str 'PowerPC,PA6T' | device_type str 'cpu' | bus-frequency val 0x3B9ACA00 | clock-frequency val 0x77359400 | timebase-frequency val 0x03F940AA | d-cache-line-size val 0x00000040 | i-cache-line-size val 0x00000040 | d-cache-block-size val 0x00000040 | i-cache-block-size val 0x00000040 | ibm,segment-page-siz blob 00 00 00 0C 00 00 00 00 00 00 00 01 00 00 00 0C 00 00 00 00 00 00 00 0E 00 00 00 20 00 00 00 01 00 00 00 0E 00 00 00 01 00 00 00 10 00 00 01 10 00 00 00 01 00 00 00 10 00 00 00 03 00 00 00 12 00 00 01 30 00 00 00 01 00 00 00 12 00 00 00 0F 00 00 00 14 00 00 00 30 00 00 00 01 00 00 00 14 00 00 00 1F 00 00 00 18 00 00 01 00 00 00 00 01 00 00 00 18 00 00 00 00 00 00 00 1E 00 00 01 20 00 00 00 01 00 00 00 1E 00 00 00 3F | ibm,processor-segmen blob 00 00 00 1C 00 00 00 28 | ibm,processor-page-s blob 00 00 00 0C 00 00 00 0E 00 00 00 10 00 00 00 12 00 00 00 14 00 00 00 18 00 00 00 1E | 64-bit blob | cpu-version val 0x00900101 | general-purpose blob | graphics blob | d-cache-size val 0x00010000 | i-cache-size val 0x00010000 | i-cache-sets val 0x00000002 | d-cache-sets val 0x00000002 | reg val 0x00000000 [PowerPC,PA6T at 1] | name str 'PowerPC,PA6T' | device_type str 'cpu' | bus-frequency val 0x3B9ACA00 | clock-frequency val 0x77359400 | timebase-frequency val 0x03F940AA | d-cache-line-size val 0x00000040 | i-cache-line-size val 0x00000040 | d-cache-block-size val 0x00000040 | i-cache-block-size val 0x00000040 | ibm,segment-page-siz blob 00 00 00 0C 00 00 00 00 00 00 00 01 00 00 00 0C 00 00 00 00 00 00 00 0E 00 00 00 20 00 00 00 01 00 00 00 0E 00 00 00 01 00 00 00 10 00 00 01 10 00 00 00 01 00 00 00 10 00 00 00 03 00 00 00 12 00 00 01 30 00 00 00 01 00 00 00 12 00 00 00 0F 00 00 00 14 00 00 00 30 00 00 00 01 00 00 00 14 00 00 00 1F 00 00 00 18 00 00 01 00 00 00 00 01 00 00 00 18 00 00 00 00 00 00 00 1E 00 00 01 20 00 00 00 01 00 00 00 1E 00 00 00 3F | ibm,processor-segmen blob 00 00 00 1C 00 00 00 28 | ibm,processor-page-s blob 00 00 00 0C 00 00 00 0E 00 00 00 10 00 00 00 12 00 00 00 14 00 00 00 18 00 00 00 1E | 64-bit blob | cpu-version val 0x00900101 | general-purpose blob | graphics blob | d-cache-size val 0x00010000 | i-cache-size val 0x00010000 | i-cache-sets val 0x00000002 | d-cache-sets val 0x00000002 | reg val 0x00000001 [memory] | name str 'memory' | device_type str 'memory' | reg cell 00000000 00000000 00000000 40000000 | available cell 00000000 00000000 00000000 3FEEF000 [lpc at fe000000] | name str 'lpc' | device_type str 'lpc' | #address-cells val 0x00000001 | #size-cells val 0x00000001 | reg cell 00000000 FE000000 00000000 02000000 | ranges cell FE000000 00000000 FE000000 02000000 [localbus at f0000000] | name str 'localbus' | device_type str 'localbus' | compatible str 'pasemi,localbus' 'localbus' | #interrupt-cells val 0x00000002 | #address-cells val 0x00000001 | #size-cells val 0x00000001 | reg cell 00000000 F0000000 00000000 0C000000 | ranges cell 00000000 00000000 F0000000 0C000000 [cf at 1000000] | name str 'cf' | compatible str 'pasemi,chitra-cf' 'pasemi,electra-cf' 'electra-cf' | reg cell 00000000 00001000 01000000 00001000 | interrupts cell 00000001 00000001 | card-detect-gpio val 0x00000005 | card-vsense-gpio val 0x00000002 | card-3v-gpio val 0x00000003 | card-5v-gpio val 0x00000004 | interrupt-parent val 0x3FF87058 [chosen] | name str 'chosen' | cpu val 0x3FF87FC0 | memory val 0x3FF88FE0 | sdc-interrupt-contro val 0x3FF87058 *** command status = 0 CFE>