<div>Hello George!</div><div> </div><div>Can you please check if there is /xyz/openbmc_project/ipmi branch in dbus?</div><div><div>root:/tmp# busctl tree xyz.openbmc_project.Settings | grep sol</div><div>    │ └─/xyz/openbmc_project/ipmi/sol</div><div>    │   └─/xyz/openbmc_project/ipmi/sol/eth0</div><div>root:/tmp# </div></div><div> </div><div>If it's not there, you need to add it via phosphor-settings-manager.</div><div> </div><div>12.07.2021, 09:41, "George Hung (洪忠敬)" <george.hung@quantatw.com>:</div><blockquote><p>Hi Cheng,<br /><br />I tried to use SOL for the latest phosphor-net-ipmid, but it can't work.<br /><br />I found the commit for SOL commands:<br /><a href="https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-net-ipmid/+/29703" rel="noopener noreferrer">https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-net-ipmid/+/29703</a><br /><br />It removed "setConfParams" function and also disabled to register setting SOL configuration parameters command. (i.e., ipmitool -I lanplus -H x -U x -P x raw 0x0c 0x21 can't be used)<br /><br />Instead of that, it changed to use the dbus interface to update SOL parameters, but I don't know which process/service to generate the related dbus path/properties for SOL parameters.<br /><br />Do I miss something to enable or config ?<br /><br /><br />Thanks.<br /><br />Best Regards<br />George Hung<br /> </p></blockquote><div> </div><div> </div><div>-- </div><div>Best regards,</div><div>Konstantin Klubnichkin,</div><div>lead firmware engineer,</div><div>server hardware R&D group,</div><div>Yandex Moscow office.</div><div>tel: +7-903-510-33-33</div><div> </div>