<div dir="ltr"><div dir="ltr"><div dir="ltr">Hello all,<div><br></div><div><div>This is regarding SPI controller driver support in OpenBMC.</div><div>Here is the scenario: Three devices connected <b><i><u>over same SPI controller</u></i></b> as mentioned below:</div><div><br></div><div>Firmware SPI Memory Controller (BSPI): (0x1E620000):</div><div>    - Flash 0 (CS0)</div><div>    - Flash 1 (CS1)</div><div>    - MCU/CPLD (CS2)</div><div><br></div><div>When I look at the OpenBMC Linux repository, I could find 'aspeed-smc.c' driver under the MTD subsystem, so this seems to work only for flash devices.</div><div><br></div><div>Do we've any other driver support or a solution to handle all the three devices? Any help/suggestions would be appreciated.</div></div><div><br></div><div><br></div><div>Regards,</div><div>Vinoth Kumar RK</div></div></div></div>