<div dir="ltr"><div>Assuming that you mean "Omit Name attribute from the sensor configuration definition and then change hwmontemp to require any Name.*"</div><div>This won't work since Entity-Manager requires Name (tried it, entity-manager does indeed complain about not finding name).</div><div><br></div><div>My rationale for an omit list vs permit list</div><div>(1) if it's a permit list then everytime you add another temp you want to monitor you need to add to this list..if you want to drop a temp then you have to modify the list again.</div><div>(2) General assumption is that the primary use case is to display all named temperatures which means a permit list is typically large</div><div>(3) adding a permit list also breaks all existing code. Everyone has to go back into their json config and add all the sensor values to the list.</div><div><br></div><div>My rationale for using the value for the "Name" attribute rather than labels or referencing sysfs attributes</div><div>(1) Looking at just the config , it's obvious as to what you're omitting.</div><div>(2) If it's label base, a label change in a driver would mean a breakage in the userspace daemon. Not a big deal; but it can be annoying.</div><div>(3) if it's sysfs attribute based then it's my opinion that it's not as readable.</div><div><br></div><div><br></div></div>