<div dir="ltr"><div dir="ltr">We got the Hello World to work perfectly, thank you for the assistance! How would we now go about doing the exact same thing, but hardware implemented? By that, I mean actually running the phosphor state manager modified module on the physical BMC chip? How do we install the OpenBMC sdk? Also, is there a method to read from the computer's BIOS chip from this modified state manager?</div><div dir="ltr"><br></div><div class="gmail-yj6qo gmail-ajU" style="outline:none;padding:10px 0px;width:22px;margin:2px 0px 0px"><br class="gmail-Apple-interchange-newline"></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Tue, Jan 21, 2020 at 11:52 AM Andrew Geissler <<a href="mailto:geissonator@gmail.com">geissonator@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div style="overflow-wrap: break-word;"><br><div><br><blockquote type="cite"><div>On Jan 20, 2020, at 11:03 AM, Samuel Herts <<a href="mailto:sdherts@gmail.com" target="_blank">sdherts@gmail.com</a>> wrote:</div><br><div><div dir="ltr">Thank you!<div>I have a supermicro X9 with ast2400 BMC chip. How would we go about installing it? openBMC onto it? We currently have a fresh install of Ubuntu LTS on it, and nothing else.</div></div></div></blockquote><div><br></div><div><div style="color:rgb(0,0,0)">The only AST2400 config I’m familiar with is our Palmetto.</div><div style="color:rgb(0,0,0)">You could start with that machine and tweak it for yours.</div><div style="color:rgb(0,0,0)"><a href="https://github.com/openbmc/openbmc/blob/master/meta-ibm/meta-palmetto/conf/machine/palmetto.conf" target="_blank">https://github.com/openbmc/openbmc/blob/master/meta-ibm/meta-palmetto/conf/machine/palmetto.conf</a></div></div><div><br></div><br><blockquote type="cite"><div><div dir="ltr"><div>In terms of the development virtual machine. I keep running into an issue when trying to wget the sdk. </div><div>Specifically, this line: <span style="background-color:initial;font-family:SFMono-Regular,Consolas,"Liberation Mono",Menlo,monospace;color:rgb(36,41,46);font-size:13.6px">wget <a href="https://openpower.xyz/job/openbmc-build-sdk/distro=ubuntu,target=romulus/lastSuccessfulBuild/artifact/deploy/sdk/oecore-x86_64-arm1176jzs-toolchain-nodistro.0.sh" target="_blank">https://openpower.xyz/job/openbmc-build-sdk/distro=ubuntu,target=romulus/lastSuccessfulBuild/artifact/deploy/sdk/oecore-x86_64-arm1176jzs-toolchain-nodistro.0.sh</a></span></div> After running that inside the romulus emulator, it runs out of space and won't complete the download. Does this mean I need to either increase the storage for the romulus, or am I simply installing it in the wrong place, and instead need to wget that into the regular VM?</div></div></blockquote><div><br></div><div><div style="color:rgb(0,0,0)">The SDK is not meant to be downloaded to the actual OpenBMC</div><div style="color:rgb(0,0,0)">system. I’t meant to be downloaded to your development system.</div><div style="color:rgb(0,0,0)">You can then use it to build OpenBMC software that you then copy</div><div style="color:rgb(0,0,0)">over to your OpenBMC and run.</div></div><br><blockquote type="cite"><div><div dir="ltr"><div>Apologies for all the questions, I am doing as much research as I can, and this mailing list seems to be the largest wealth of knowledge I have available.</div><div><br></div><div>--Sam</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Mon, Jan 20, 2020 at 1:57 AM Michael Richardson <<a href="mailto:mcr@sandelman.ca" target="_blank">mcr@sandelman.ca</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><br>
Samuel Herts <<a href="mailto:sdherts@gmail.com" target="_blank">sdherts@gmail.com</a>> wrote:<br>
    > I am currently working on getting a working OpenBMC test environment<br>
    > up and running. I am using VirtualBox and the github Development<br>
    > Environment tutorial. I had a couple questions regarding how to make<br>
    > our own modules. Would it be possible to upload files to the bmc on<br>
    > the virtual server?<br>
<br>
You can do that.<br>
The disk is rather small by default.<br>
If you are using VirtualBox, you may be able to use the vboxfs file system to<br>
mount the host. That might require adding modules to the kernel.<br>
<br>
    > And would I be able to make a script which can read text off of that<br>
    > file inside the bmc chip?<br>
<br>
    > I have a physical server which I am not using yet, would I be able to<br>
    > install openbmc and the scripts and insert the file onto the actual<br>
    > bmc chip, and eventually read from that file?<br>
<br>
Maybe. What server do you have?<br>
<br>
--<br>
]               Never tell me the odds!                 | ipv6 mesh networks [<br>
]   Michael Richardson, Sandelman Software Works        |    IoT architect   [<br>
]     <a href="mailto:mcr@sandelman.ca" target="_blank">mcr@sandelman.ca</a>  <a href="http://www.sandelman.ca/" rel="noreferrer" target="_blank">http://www.sandelman.ca/</a>        |   ruby on rails    [<br>
<br>
</blockquote></div><br clear="all"><div><br></div>-- <br><div dir="ltr"><div dir="ltr">Sincerely, <div>Samuel Herts</div></div></div>
</div></blockquote></div><br></div></blockquote></div><br clear="all"><div><br></div>-- <br><div dir="ltr" class="gmail_signature"><div dir="ltr">Sincerely, <div>Samuel Herts</div></div></div>