<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<style type="text/css" style="display:none;"> P {margin-top:0;margin-bottom:0;} </style>
</head>
<body dir="ltr">
<div><span>I use qemu to test the image. Got the result.<br>
</span></div>
<div><span><br>
</span></div>
<div><span>$ qemu-system-arm -m 512 -M ast2500-evb -nographic -drive file=phosphor-intel-platform-1.bin,format=raw,if=mtd</span></div>
<div><span></span></div>
<div><br>
</div>
<div><br>
</div>
<div>U-Boot 2016.07 (Sep 11 2019 - 21:38:56 +0000)<br>
</div>
<div><br>
</div>
<div>SOC : AST2500-A1<br>
</div>
<div>RST : 0x01<br>
</div>
<div>PLL : 24 MHz<br>
</div>
<div>CPU : 792 MHz<br>
</div>
<div>MEM : 2.240 MHz, EEC: Disable, Cache: Disable<br>
</div>
<div>VGA : 16 MiB<br>
</div>
<div>DRAM : init by SOC<br>
</div>
<div> Watchdog enabled<br>
</div>
<div>DRAM: 496 MiB<br>
</div>
<div>Flash: 32 MiB<br>
</div>
<div>*** Warning - bad CRC, using default environment<br>
</div>
<div><br>
</div>
<div>In: serial<br>
</div>
<div>Out: serial<br>
</div>
<div>Err: serial<br>
</div>
<div>Error: start and/or end address not on sector boundary<br>
</div>
<div>Error: start and/or end address not on sector boundary<br>
</div>
<div>Error: start and/or end address not on sector boundary<br>
</div>
<div><br>
</div>
<span></span>
<div>
<div id="appendonsend" style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
</div>
<div style="font-family:Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="font-family:Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
Zheng<br>
</div>
<hr tabindex="-1" style="display:inline-block; width:98%">
<div id="divRplyFwdMsg" dir="ltr"><font style="font-size:11pt" face="Calibri, sans-serif" color="#000000"><b>From:</b> Yong Li <yong.b.li@linux.intel.com><br>
<b>Sent:</b> Tuesday, September 10, 2019 1:26 AM<br>
<b>To:</b> 'Zheng Bao' <fishbaoz@hotmail.com>; 'Andrew Jeffery' <andrew@aj.id.au>; 'AKASH G J' <akashgj91@gmail.com>; openbmc@lists.ozlabs.org <openbmc@lists.ozlabs.org><br>
<b>Subject:</b> RE: Enable KCS interface in zaius</font>
<div> </div>
</div>
<div lang="EN-US">
<div class="x_WordSection1">
<p class="x_MsoNormal" style="margin: 0in 0in 0.0001pt; font-size: 11pt; font-family: "Calibri", sans-serif;">
I would like to know how did you perform the build? Please perform the below commands:</p>
<p class="x_MsoNormal" style="margin: 0in 0in 0.0001pt; font-size: 11pt; font-family: "Calibri", sans-serif;">
</p>
<p class="x_MsoNormal" style="margin: 0in 0in 0.0001pt; font-size: 11pt; font-family: "Calibri", sans-serif;">
export TEMPLATECONF=meta-openbmc-mods/meta-wht/conf</p>
<p class="x_MsoNormal" style="margin: 0in 0in 0.0001pt; font-size: 11pt; font-family: "Calibri", sans-serif;">
source oe-init-build-env</p>
<p class="x_MsoNormal" style="margin: 0in 0in 0.0001pt; font-size: 11pt; font-family: "Calibri", sans-serif;">
bitbake intel-platforms</p>
<p class="x_MsoNormal" style="margin: 0in 0in 0.0001pt; font-size: 11pt; font-family: "Calibri", sans-serif;">
</p>
<p class="x_MsoNormal" style="margin: 0in 0in 0.0001pt; font-size: 11pt; font-family: "Calibri", sans-serif;">
Thanks,</p>
<p class="x_MsoNormal" style="margin: 0in 0in 0.0001pt; font-size: 11pt; font-family: "Calibri", sans-serif;">
Yong</p>
<p class="x_MsoNormal" style="margin: 0in 0in 0.0001pt; font-size: 11pt; font-family: "Calibri", sans-serif;">
</p>
<div>
<div style="border:none; border-top:solid #E1E1E1 1.0pt; padding:3.0pt 0in 0in 0in">
<p class="x_MsoNormal" style="margin: 0in 0in 0.0001pt; font-size: 11pt; font-family: "Calibri", sans-serif;">
<a name="x______replyseparator"></a><b>From:</b> Zheng Bao <fishbaoz@hotmail.com>
<br>
<b>Sent:</b> Saturday, September 7, 2019 7:34 PM<br>
<b>To:</b> Yong Li <yong.b.li@linux.intel.com>; 'Andrew Jeffery' <andrew@aj.id.au>; 'AKASH G J' <akashgj91@gmail.com>; openbmc@lists.ozlabs.org<br>
<b>Subject:</b> Re: Enable KCS interface in zaius</p>
</div>
</div>
<p class="x_MsoNormal" style="margin: 0in 0in 0.0001pt; font-size: 11pt; font-family: "Calibri", sans-serif;">
</p>
<div>
<p class="x_MsoNormal" style="margin: 0in 0in 0.0001pt; font-size: 11pt; font-family: "Calibri", sans-serif;">
I check out the <a href="https://github.com/Intel-BMC/openbmc">https://github.com/Intel-BMC/openbmc</a></p>
</div>
<div>
<p class="x_MsoNormal" style="margin: 0in 0in 0.0001pt; font-size: 11pt; font-family: "Calibri", sans-serif;">
and build the board: meta-openbmc-mods/meta-wolfpass/conf</p>
</div>
<div>
<p class="x_MsoNormal" style="margin: 0in 0in 0.0001pt; font-size: 11pt; font-family: "Calibri", sans-serif;">
</p>
</div>
<div>
<p class="x_MsoNormal" style="margin: 0in 0in 0.0001pt; font-size: 11pt; font-family: "Calibri", sans-serif;">
But got the error,</p>
</div>
<div>
<p class="x_MsoNormal" style="margin: 0in 0in 0.0001pt; font-size: 11pt; font-family: "Calibri", sans-serif;">
dd: failed to open '/home/baozheng/bmc/openbmc-github/build/tmp/deploy/images/intel-ast2500/fitImage-rootfs-intel-ast2500.bin': No such file or directory</p>
</div>
<div>
<p class="x_MsoNormal" style="margin: 0in 0in 0.0001pt; font-size: 11pt; font-family: "Calibri", sans-serif;">
</p>
</div>
<div>
<p class="x_MsoNormal" style="margin: 0in 0in 0.0001pt; font-size: 11pt; font-family: "Calibri", sans-serif;">
Did I miss something?</p>
</div>
<div>
<p class="x_MsoNormal" style="margin: 0in 0in 0.0001pt; font-size: 11pt; font-family: "Calibri", sans-serif;">
</p>
</div>
<div>
<p class="x_MsoNormal" style="margin: 0in 0in 0.0001pt; font-size: 11pt; font-family: "Calibri", sans-serif;">
Zheng</p>
</div>
<div>
<p class="x_MsoNormal" style="margin: 0in 0in 0.0001pt; font-size: 11pt; font-family: "Calibri", sans-serif;">
</p>
</div>
<div>
<div>
<p class="x_MsoNormal" style="margin: 0in 0in 0.0001pt; font-size: 11pt; font-family: "Calibri", sans-serif;">
<span style="font-size:12.0pt; color:black"> </span></p>
</div>
<div class="x_MsoNormal" style="margin: 0in 0in 0.0001pt; font-size: 11pt; font-family: "Calibri", sans-serif;text-align:center" align="center">
<hr width="98%" size="3" align="center">
</div>
<div id="x_divRplyFwdMsg">
<p class="x_MsoNormal" style="margin: 0in 0in 0.0001pt; font-size: 11pt; font-family: "Calibri", sans-serif;">
<b><span style="color:black">From:</span></b><span style="color:black"> openbmc <<a href="mailto:openbmc-bounces+fishbaoz=hotmail.com@lists.ozlabs.org">openbmc-bounces+fishbaoz=hotmail.com@lists.ozlabs.org</a>> on behalf of Yong Li <<a href="mailto:yong.b.li@linux.intel.com">yong.b.li@linux.intel.com</a>><br>
<b>Sent:</b> Friday, August 30, 2019 6:29 AM<br>
<b>To:</b> 'Andrew Jeffery' <<a href="mailto:andrew@aj.id.au">andrew@aj.id.au</a>>; 'AKASH G J' <<a href="mailto:akashgj91@gmail.com">akashgj91@gmail.com</a>>;
<a href="mailto:openbmc@lists.ozlabs.org">openbmc@lists.ozlabs.org</a> <<a href="mailto:openbmc@lists.ozlabs.org">openbmc@lists.ozlabs.org</a>><br>
<b>Subject:</b> RE: Enable KCS interface in zaius</span> </p>
<div>
<p class="x_MsoNormal" style="margin: 0in 0in 0.0001pt; font-size: 11pt; font-family: "Calibri", sans-serif;">
</p>
</div>
</div>
<div>
<div>
<p class="x_MsoNormal" style="margin: 0in 0in 0.0001pt; font-size: 11pt; font-family: "Calibri", sans-serif;margin-bottom:12.0pt">
It seems that the kernel needs to enable KCS, and disable BT. <br>
CONFIG_ASPEED_KCS_IPMI_BMC=y<br>
<br>
Suggest to check on this: <a href="https://github.com/Intel-BMC/openbmc">https://github.com/Intel-BMC/openbmc</a><br>
<br>
Thanks,<br>
Yong<br>
-----Original Message-----<br>
From: openbmc <<a href="mailto:openbmc-bounces+yong.b.li=linux.intel.com@lists.ozlabs.org">openbmc-bounces+yong.b.li=linux.intel.com@lists.ozlabs.org</a>><br>
On Behalf Of Andrew Jeffery<br>
Sent: Friday, August 30, 2019 12:42 PM<br>
To: AKASH G J <<a href="mailto:akashgj91@gmail.com">akashgj91@gmail.com</a>>; <a href="mailto:openbmc@lists.ozlabs.org">
openbmc@lists.ozlabs.org</a><br>
Subject: Re: Enable KCS interface in zaius<br>
<br>
<br>
<br>
On Thu, 29 Aug 2019, at 09:05, AKASH G J wrote:<br>
> Hi all,<br>
> <br>
> I am using server platform with Intel processor and Aspeed AST-2500 <br>
> BMC. OpenBMC firmware with zaius configuration is used for BMC.<br>
> <br>
<br>
Zaius is an OpenPOWER platform (and our OpenPOWER platforms use the BT<br>
interface rather than KCS). You're using an Intel-based processor for the<br>
host, so perhaps it's better to start with an x86-based platform such as the<br>
s2600wf. This should already have KCS IPMI enabled for you.<br>
<br>
Andrew</p>
</div>
</div>
</div>
</div>
</div>
</div>
</body>
</html>