<div dir="ltr">Hello all,<br><div><br></div><div>Here is the proposal for the Network Settings GUI: <a href="https://ibm.invisionapp.com/share/8ENYRVXAPFD#/319115961_Physical">https://ibm.invisionapp.com/share/8ENYRVXAPFD#/319115961_Physical</a> <br>To navigate, click on any flashing blue rectangles or use the right and left keyboard arrows.</div><div><br></div><div>The design is based on the needs found by our research with stakeholders and users. </div><div><br></div><div>With the GUI, a user is able to assign a Fully Qualified Domain Name (FQDN), and choose either DHCP or static configuration, for any selected interface.</div><div><br></div><div>If DHCP is chosen, the GUI will reflect the appropriate default gateway, DNS server, and IP address assigned by the DHCP server. If static is selected, users manually assign the default gateway, as well as multiple DNS servers and a single IP address (not including the one assigned by zeroconf). </div><div><br></div><div>Despite the type of configuration selected (DHCP or static), zero-configuration is always on to protect the user and ensure there is always an IP address assigned. However, once an interface has a non zeroconf IP address assigned, users have the flexibility to permanently delete that address. Currently, users can only temporarily delete these using CLI; once they reboot, the addresses come back. Permanently removing IP addresses assigned by zero-configuration is important to customers who need to account for every single IP address. </div><div><br></div><div><br></div><div>NOTE: The reason for limiting to a single IP address per interface is that our research from users and stakeholders indicates that multiple would never be used and in fact it could make it easy to make a mistake, so for this reason we will not support it in the GUI. Additionally, there will be no support for VLAN as it was not expected by users and added unnecessary confusion. <br></div><div><br></div><div>Regards,</div><div>Jandra Aranguren</div><div><br></div><div><br></div></div>