<br><tt><font size=2>Patrick Williams <patrick@stwcx.xyz> wrote on
03/01/2016 04:47:03 PM:<br><br>> From: Patrick Williams <patrick@stwcx.xyz></font></tt><br><tt><font size=2>> To: Adriana Kobylak/Austin/IBM@IBMUS</font></tt><br><tt><font size=2>> Cc: Joel Stanley <joel@jms.id.au>, OpenBMC
Patches <openbmc-<br>> patches@stwcx.xyz>, OpenBMC Maillist <openbmc@lists.ozlabs.org></font></tt><br><tt><font size=2>> Date: 03/01/2016 04:47 PM</font></tt><br><tt><font size=2>> Subject: Re: [PATCH openbmc] Add temporary adm1278
hwmon pmbus driver patch</font></tt><br><tt><font size=2>> <br>> On Tue, Mar 01, 2016 at 03:15:12PM -0600, Adriana Kobylak wrote:<br>> > What makes this pull request different from other openbmc changes
to <br>> > require to be sent via git-send-email before it can be reviewed?<br>> <br>> I suspect Joel is just asking for it to also be submitted to the Linux<br>> tree so that its content can be reviewed there. I agree we should
not<br>> merge patches into the openbmc tree unless it fixes a critical problem<br>> and has also been submitted to the upstream tree.<br>> </font></tt><br><tt><font size=2>Yi, please submit the patch to the kernel repository
as well.<br></font></tt><br><tt><font size=2>There's a requirement to deliver this driver on Friday,
could we get this reviewed/merged this week in openbmc? I believe we did
this before for OCC then removed the temporary patch once it was upstreamed.<br>> > <br>> > <br>> > <br>> > <br>> > <br>> > <br>> > From: Joel Stanley <joel@jms.id.au><br>> > To: OpenBMC Patches <openbmc-patches@stwcx.xyz><br>> > Cc: OpenBMC Maillist <openbmc@lists.ozlabs.org><br>> > Date: 02/17/2016 10:24 PM<br>> > Subject: Re: [PATCH openbmc] Add temporary
adm1278 hwmon pmbus <br>> > driver patch<br>> > Sent by: "openbmc" <br>> > <openbmc-bounces+anoo=us.ibm.com@lists.ozlabs.org><br>> > <br>> > <br>> > <br>> > On Wed, Feb 17, 2016 at 9:00 PM, OpenBMC Patches<br>> > <openbmc-patches@stwcx.xyz> wrote:<br>> > > From: Yi Li <adamliyi@msn.com><br>> > ><br>> > > This patch temporarily adds adm1278 hwmon driver as a kernel
patch to <br>> > openbmc,<br>> > > for testing on Barreleye.<br>> > <br>> > Can you please send this as a patch with git-send-email so we
can review <br>> > it.<br>> > <br>> > > If in the future this patch will still be useful, it should
be put into <br>> > linux kernel.<br>> > ><br>> > > Barreleye has three adm1278 devices on three i2c buses.<br>> > > This patch enables reading adm1278 sensors via hwmon sysfs
interface.<br>> > > The enabled sensors are: current, voltage (In and Out),
power and <br>> > temperature.<br>> > > Detail usage can be found in 'readme_adm1278.txt'.<br>> > ><br>> > > Signed-off-by: Yi Li <adamliyi@msn.com><br>> > > ---<br>> > > .../recipes-kernel/linux/linux-obmc/barreleye.cfg
| 3 +<br>> > > .../linux/linux-obmc/hwmon_adm1278.patch
| 165 <br>> > +++++++++++++++++++++<br>> > > .../linux/linux-obmc/readme_adm1278.txt
| 78 ++++++++++<br>> > > .../recipes-kernel/linux/linux-obmc_%.bbappend
| 3 +<br>> > > 4 files changed, 249 insertions(+)<br>> > > create mode 100644 <br>> > meta-openbmc-machines/meta-openpower/meta-rackspace/meta-<br>> barreleye/recipes-kernel/linux/linux-obmc/barreleye.cfg<br>> > > create mode 100644 <br>> > meta-openbmc-machines/meta-openpower/meta-rackspace/meta-<br>> barreleye/recipes-kernel/linux/linux-obmc/hwmon_adm1278.patch<br>> > > create mode 100644 <br>> > meta-openbmc-machines/meta-openpower/meta-rackspace/meta-<br>> barreleye/recipes-kernel/linux/linux-obmc/readme_adm1278.txt<br>> > > create mode 100644 <br>> > meta-openbmc-machines/meta-openpower/meta-rackspace/meta-<br>> barreleye/recipes-kernel/linux/linux-obmc_%.bbappend<br>> > ><br>> > > diff --git <br>> > a/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-<br>> barreleye/recipes-kernel/linux/linux-obmc/barreleye.cfg <br>> > b/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-<br>> barreleye/recipes-kernel/linux/linux-obmc/barreleye.cfg<br>> > > new file mode 100644<br>> > > index 0000000..086f191<br>> > > --- /dev/null<br>> > > +++ <br>> > b/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-<br>> barreleye/recipes-kernel/linux/linux-obmc/barreleye.cfg<br>> > > @@ -0,0 +1,3 @@<br>> > > +CONFIG_PMBUS=y<br>> > > +CONFIG_SENSORS_PMBUS=y<br>> > > +CONFIG_SENSORS_ADM1275=y<br>> > > diff --git <br>> > a/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-<br>> barreleye/recipes-kernel/linux/linux-obmc/hwmon_adm1278.patch <br>> > b/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-<br>> barreleye/recipes-kernel/linux/linux-obmc/hwmon_adm1278.patch<br>> > > new file mode 100644<br>> > > index 0000000..074d39f<br>> > > --- /dev/null<br>> > > +++ <br>> > b/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-<br>> barreleye/recipes-kernel/linux/linux-obmc/hwmon_adm1278.patch<br>> > > @@ -0,0 +1,165 @@<br>> > > +diff --git a/drivers/hwmon/pmbus/adm1275.c <br>> > b/drivers/hwmon/pmbus/adm1275.c<br>> > > +index 188af4c..a45075d 100644<br>> > > +--- a/drivers/hwmon/pmbus/adm1275.c<br>> > > ++++ b/drivers/hwmon/pmbus/adm1275.c<br>> > > +@@ -24,7 +24,7 @@<br>> > > + #include <linux/bitops.h><br>> > > + #include "pmbus.h"<br>> > > +<br>> > > +-enum chips { adm1075, adm1275, adm1276, adm1293, adm1294
};<br>> > > ++enum chips { adm1075, adm1275, adm1276, adm1278, adm1293,
adm1294 };<br>> > > +<br>> > > + #define ADM1275_MFR_STATUS_IOUT_WARN2 BIT(0)<br>> > > + #define ADM1293_MFR_STATUS_VAUX_UV_WARN
BIT(5)<br>> > > +@@ -70,6 +70,22 @@ enum chips { adm1075, adm1275, adm1276,
adm1293, <br>> > adm1294 };<br>> > > + #define ADM1075_VAUX_OV_WARN
BIT(7)<br>> > > + #define ADM1075_VAUX_UV_WARN
BIT(6)<br>> > > +<br>> > > ++#define ADM1278_PMON_CONTROL
0xd3<br>> > > ++#define ADM1278_PMON_CONFIG
0xd4<br>> > > ++#define ADM1278_CFG_TSFLT
BIT(15)<br>> > > ++#define ADM1278_CFG_SIMULTANEOUS BIT(14)<br>> > > ++#define ADM1278_CFG_PMON_MODE
BIT(4)<br>> > > ++#define ADM1278_CFG_TEMP1_EN
BIT(3)<br>> > > ++#define ADM1278_CFG_VIN_EN
BIT(2)<br>> > > ++#define ADM1278_CFG_VOUT_EN
BIT(1)<br>> > > ++#define ADM1278_PEAK_TEMPERATURE 0xd7<br>> > > ++<br>> > > ++#define ADM1278_R_SENSE 1000
/* R_sense resistor value in <br>> > microohmsi */<br>> > > ++<br>> > > ++static int r_sense = ADM1278_R_SENSE;<br>> > > ++module_param(r_sense, int, 0644);<br>> > > ++MODULE_PARM_DESC(r_sense, "Rsense resistor value
in microohms");<br>> > > ++<br>> > > + struct adm1275_data {<br>> > > + int id;<br>> > > + bool have_oc_fault;<br>> > > +@@ -186,6 +202,11 @@ static int adm1275_read_word_data(struct
<br>> > i2c_client *client, int page, int reg)<br>> > > + case PMBUS_VIRT_READ_VIN_MAX:<br>> > > + ret =
pmbus_read_word_data(client, 0, ADM1275_PEAK_VIN);<br>> > > + break;<br>> > > ++ case PMBUS_VIRT_READ_TEMP_MAX:<br>> > > ++ if (data->id
!= adm1278)<br>> > > ++
return -ENODATA;<br>> > > ++ ret =
pmbus_read_word_data(client, 0, <br>> > ADM1278_PEAK_TEMPERATURE);<br>> > > ++ break;<br>> > > + case PMBUS_VIRT_READ_PIN_MIN:<br>> > > + if (!data->have_pin_min)<br>> > > +
return -ENXIO;<br>> > > +@@ -199,6 +220,7 @@ static int adm1275_read_word_data(struct
i2c_client <br>> > *client, int page, int reg)<br>> > > + case PMBUS_VIRT_RESET_IOUT_HISTORY:<br>> > > + case PMBUS_VIRT_RESET_VOUT_HISTORY:<br>> > > + case PMBUS_VIRT_RESET_VIN_HISTORY:<br>> > > ++ case PMBUS_VIRT_RESET_TEMP_HISTORY:<br>> > > + break;<br>> > > + case PMBUS_VIRT_RESET_PIN_HISTORY:<br>> > > + if (!data->have_pin_max)<br>> > > +@@ -239,6 +261,9 @@ static int adm1275_write_word_data(struct
<br>> > i2c_client *client, int page, int reg,<br>> > > + case PMBUS_VIRT_RESET_VIN_HISTORY:<br>> > > + ret =
pmbus_write_word_data(client, 0, ADM1275_PEAK_VIN, <br>> > 0);<br>> > > + break;<br>> > > ++ case PMBUS_VIRT_RESET_TEMP_HISTORY:<br>> > > ++ ret =
pmbus_write_word_data(client, 0, <br>> > ADM1278_PEAK_TEMPERATURE, 0);<br>> > > ++ break;<br>> > > + case PMBUS_VIRT_RESET_PIN_HISTORY:<br>> > > + ret =
pmbus_write_word_data(client, 0, ADM1276_PEAK_PIN, <br>> > 0);<br>> > > + if (!ret
&& data->have_pin_min)<br>> > > +@@ -312,6 +337,7 @@ static const struct i2c_device_id adm1275_id[]
= {<br>> > > + { "adm1075", adm1075 },<br>> > > + { "adm1275", adm1275 },<br>> > > + { "adm1276", adm1276 },<br>> > > ++ { "adm1278", adm1278 },<br>> > > + { "adm1293", adm1293 },<br>> > > + { "adm1294", adm1294 },<br>> > > + { }<br>> > > +@@ -335,6 +361,8 @@ static int adm1275_probe(struct i2c_client
*client,<br>> > > +
|
I2C_FUNC_SMBUS_BLOCK_DATA))<br>> > > + return
-ENODEV;<br>> > > +<br>> > > ++ /* i2c_aspeed driver does not handle
i2c_smbus_read_block_data <br>> > correctly */<br>> > > ++#if 0<br>> > > + ret = i2c_smbus_read_block_data(client,
PMBUS_MFR_ID, <br>> > block_buffer);<br>> > > + if (ret < 0) {<br>> > > + dev_err(&client->dev,
"Failed to read Manufacturer <br>> > ID\n");<br>> > > +@@ -363,6 +391,7 @@ static int adm1275_probe(struct i2c_client
*client,<br>> > > + dev_notice(&client->dev,<br>> > > +
"Device mismatch: Configured %s,
detected <br>> > %s\n",<br>> > > +
id->name, mid->name);<br>> > > ++#endif<br>> > > +<br>> > > + config = i2c_smbus_read_byte_data(client,
ADM1275_PMON_CONFIG);<br>> > > + if (config < 0)<br>> > > +@@ -377,7 +406,9 @@ static int adm1275_probe(struct i2c_client
*client,<br>> > > + if (!data)<br>> > > + return
-ENOMEM;<br>> > > +<br>> > > +- data->id = mid->driver_data;<br>> > > ++ /* i2c_aspeed driver does not handle
i2c_smbus_read_block_data <br>> > correctly */<br>> > > ++ //data->id = mid->driver_data;<br>> > > ++ data->id = adm1278;<br>> > > +<br>> > > + info = &data->info;<br>> > > +<br>> > > +@@ -460,6 +491,62 @@ static int adm1275_probe(struct i2c_client
<br>> > *client,<br>> > > +
info->func[0] |=<br>> > > +
PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;<br>> > > + break;<br>> > > ++ case adm1278:<br>> > > ++ /* Configure
monitoring */<br>> > > ++ ret =
i2c_smbus_write_byte_data(client,<br>> > > ++
ADM1278_PMON_CONTROL, 0);<br>> > > ++ if (ret
< 0)<br>> > > ++
return ret;<br>> > > ++ ret =
i2c_smbus_read_word_data(client, <br>> > ADM1275_PMON_CONFIG);<br>> > > ++ ret =
i2c_smbus_write_word_data(client, <br>> > ADM1275_PMON_CONFIG,<br>> > > ++
ADM1278_CFG_PMON_MODE |<br>> > > ++
ADM1278_CFG_TEMP1_EN |<br>> > > ++
ADM1278_CFG_VIN_EN |<br>> > > ++
ADM1278_CFG_VOUT_EN);<br>> > > ++ if (ret
< 0)<br>> > > ++
return ret;<br>> > > ++ ret =
i2c_smbus_read_word_data(client, <br>> > ADM1275_PMON_CONFIG);<br>> > > ++ dev_info(&client->dev,
"adm1278 config: 0x%x\n", ret);<br>> > > ++ ret =
i2c_smbus_write_byte_data(client, <br>> > ADM1278_PMON_CONTROL,1);<br>> > > ++ if (ret
< 0)<br>> > > ++
return ret;<br>> > > ++<br>> > > ++ info->func[0]
|= PMBUS_HAVE_VIN<br>> > > ++
| PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT<br>> > > ++
| PMBUS_HAVE_PIN<br>> > > ++
| PMBUS_HAVE_STATUS_INPUT<br>> > > ++
| PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;<br>> > > ++<br>> > > ++ data->have_oc_fault
= false;<br>> > > ++ data->have_uc_fault
= false;<br>> > > ++ data->have_vout
= true;<br>> > > ++ data->have_vaux_status
= false;<br>> > > ++ data->have_mfr_vaux_status
= false;<br>> > > ++ data->have_iout_min
= false;<br>> > > ++ data->have_pin_min
= false;<br>> > > ++ data->have_pin_max
= true;<br>> > > ++<br>> > > ++ info->m[PSC_VOLTAGE_IN]
= 19599;<br>> > > ++ info->b[PSC_VOLTAGE_IN]
= 0;<br>> > > ++ info->R[PSC_VOLTAGE_IN]
= -2;<br>> > > ++<br>> > > ++ info->m[PSC_VOLTAGE_OUT]
= 19599;<br>> > > ++ info->b[PSC_VOLTAGE_OUT]
= 0;<br>> > > ++ info->R[PSC_VOLTAGE_OUT]
= -2;<br>> > > ++<br>> > > ++ info->m[PSC_CURRENT_OUT]
= 800 * r_sense / 1000;<br>> > > ++ info->b[PSC_CURRENT_OUT]
= 20475;<br>> > > ++ info->R[PSC_CURRENT_OUT]
= -1;<br>> > > ++<br>> > > ++ info->m[PSC_POWER]
= 6123 * r_sense / 1000;<br>> > > ++ info->b[PSC_POWER]
= 0;<br>> > > ++ info->R[PSC_POWER]
= -2;<br>> > > ++<br>> > > ++ info->format[PSC_TEMPERATURE]
= direct;<br>> > > ++ info->m[PSC_TEMPERATURE]
= 42;<br>> > > ++ info->b[PSC_TEMPERATURE]
= 31880;<br>> > > ++ info->R[PSC_TEMPERATURE]
= -1;<br>> > > ++ break;<br>> > > + case adm1293:<br>> > > + case adm1294:<br>> > > + data->have_iout_min
= true;<br>> > > diff --git <br>> > a/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-<br>> barreleye/recipes-kernel/linux/linux-obmc/readme_adm1278.txt <br>> > b/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-<br>> barreleye/recipes-kernel/linux/linux-obmc/readme_adm1278.txt<br>> > > new file mode 100644<br>> > > index 0000000..e86d977<br>> > > --- /dev/null<br>> > > +++ <br>> > b/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-<br>> barreleye/recipes-kernel/linux/linux-obmc/readme_adm1278.txt<br>> > > @@ -0,0 +1,78 @@<br>> > > +README for adm1278 hwmon driver<br>> > > +==================================<br>> > > +Yi Li <shliyi@cn.ibm.com><br>> > > +<br>> > > +<br>> > > +This is a temporary kernel patch to enable hwmon driver
for adm1278 <br>> > chip on Barreleye.<br>> > > +When this patch is merged into linux kernel, this patch
will be removed <br>> > from openbmc.<br>> > > +<br>> > > +The adm1278 driver is created according to datasheet:<br>> > > <br>> > +http://www.analog.com/media/en/technical-documentation/data-<br>> sheets/ADM1278.pdf<br>> > > +<br>> > > +The patch heavily re-used adm1278 enabling code from: <br>> > </font></tt><a href="https://github.com/facebook/openbmc/blob/master/meta-aspeed/"><tt><font size=2>https://github.com/facebook/openbmc/blob/master/meta-aspeed/</font></tt></a><tt><font size=2><br>> recipes-kernel/linux/files/patch-2.6.28.9/0000-linux-openbmc.patch<br>> > .<br>> > > +<br>> > > +This patch has been tested on barreleye, by following these
steps:<br>> > > +<br>> > > +1) There are 3 adm1278 devices on Barreleye<br>> > > +<br>> > > +I2C5: P12v_a for CPU0<br>> > > +I2C6: P12v_b for CPU1<br>> > > +I2C7: P12v_c for HDD and IO Board<br>> > > +<br>> > > +2) adm1278 driver is based on adm1275.c, which depends
on pmbus. This <br>> > patch builds<br>> > > +adm1275 and pmbus into kernel.<br>> > > +<br>> > > +3) When kernel booted, initialize the adm1278 devices:<br>> > > +<br>> > > +root@barreleye:~# echo adm1278 0x10 > <br>> > /sys/class/i2c-adapter/i2c-4/new_device<br>> > > +root@barreleye:~# echo adm1278 0x10 > <br>> > /sys/class/i2c-adapter/i2c-5/new_device<br>> > > +root@barreleye:~# echo adm1278 0x10 > <br>> > /sys/class/i2c-adapter/i2c-6/new_device<br>> > > +<br>> > > +There will be three new hwmon sysfs entries created:<br>> > > +<br>> > > +root@barreleye:~# ls /sys/class/hwmon/hwmon3/<br>> > > +curr1_highest in1_highest
in1_reset_history <br>> > in2_min_alarm power1_label
temp1_input<br>> > > +curr1_input in1_input
in2_highest <br>> > in2_reset_history power1_max
temp1_max<br>> > > +curr1_label in1_label
in2_input
name <br>> > power1_reset_history
temp1_max_alarm<br>> > > +curr1_max in1_max
in2_label power/ <br>> > subsystem/ temp1_reset_history<br>> > > +curr1_max_alarm in1_max_alarm
in2_max power1_alarm <br>> > temp1_crit uevent<br>> > > +curr1_reset_history in1_min
in2_max_alarm power1_input <br>> > temp1_crit_alarm<br>> > > +device/
in1_min_alarm in2_min <br>> > power1_input_highest temp1_highest<br>> > > +root@barreleye:~# ls /sys/class/hwmon/hwmon4/<br>> > > +curr1_highest in1_highest
in1_reset_history <br>> > in2_min_alarm power1_label
temp1_input<br>> > > +curr1_input in1_input
in2_highest <br>> > in2_reset_history power1_max
temp1_max<br>> > > +curr1_label in1_label
in2_input
name <br>> > power1_reset_history
temp1_max_alarm<br>> > > +curr1_max in1_max
in2_label power/ <br>> > subsystem/ temp1_reset_history<br>> > > +curr1_max_alarm in1_max_alarm
in2_max power1_alarm <br>> > temp1_crit uevent<br>> > > +curr1_reset_history in1_min
in2_max_alarm power1_input <br>> > temp1_crit_alarm<br>> > > +device/
in1_min_alarm in2_min <br>> > power1_input_highest temp1_highest<br>> > > +root@barreleye:~# ls /sys/class/hwmon/hwmon5/<br>> > > +curr1_highest in1_highest
in1_reset_history <br>> > in2_min_alarm power1_label
temp1_input<br>> > > +curr1_input in1_input
in2_highest <br>> > in2_reset_history power1_max
temp1_max<br>> > > +curr1_label in1_label
in2_input
name <br>> > power1_reset_history
temp1_max_alarm<br>> > > +curr1_max in1_max
in2_label power/ <br>> > subsystem/ temp1_reset_history<br>> > > +curr1_max_alarm in1_max_alarm
in2_max power1_alarm <br>> > temp1_crit uevent<br>> > > +curr1_reset_history in1_min
in2_max_alarm power1_input <br>> > temp1_crit_alarm<br>> > > +device/
in1_min_alarm in2_min <br>> > power1_input_highest temp1_highest<br>> > > +<br>> > > +4) For details of what each hwmon sysfs attributes mean,
please refer <br>> > to:<br>> > > +https://www.kernel.org/doc/Documentation/hwmon/pmbus<br>> > > +For short, 'curr1_*' refers to 'IOUT', 'in1_*' refers to
'vin', 'in2_*' <br>> > refers to 'vout', 'power1_*' refers to 'input power',<br>> > > +'temp1_*' for 'temperature'.<br>> > > +<br>> > > +5) Remaining issue:<br>> > > +<br>> > > +5.1) Currently, i2c_aspeed driver does not handle <br>> > "i2c_smbus_read_block_data()" correctly. So this patch
has to bypass some <br>> > detection code.<br>> > > +We need to fix this issue when the patch is merged to kernel.<br>> > > +5.2) According to adm1278 datasheet, there is a sense resistor
used to <br>> > measure power and current. The resistor will affect conversion
between<br>> > > +adm1278 register value to real-world value for current
and power. I am <br>> > not very sure about the resistor value. So using 1 mili-ohms
(or 1000 <br>> > micro-ohms) as default value. When build the adm1275 driver as
kernel <br>> > module, we can set this resistor value by:<br>> > > +<br>> > > +# insmod adm1275.ko r_sense=500<br>> > > +<br>> > > +This will set the 'sense resistor' to 500 micro-ohms.<br>> > > +5.3) Some of the sensor value, e.g, 'temp1_input' seems
not reasonable, <br>> > e.g:<br>> > > +<br>> > > +root@barreleye:~# cat /sys/class/hwmon/hwmon4/temp1_input<br>> > > +-270952<br>> > > +<br>> > > +Need further check on that.<br>> > > diff --git <br>> > a/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-<br>> barreleye/recipes-kernel/linux/linux-obmc_%.bbappend <br>> > b/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-<br>> barreleye/recipes-kernel/linux/linux-obmc_%.bbappend<br>> > > new file mode 100644<br>> > > index 0000000..b6e8e16<br>> > > --- /dev/null<br>> > > +++ <br>> > b/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-<br>> barreleye/recipes-kernel/linux/linux-obmc_%.bbappend<br>> > > @@ -0,0 +1,3 @@<br>> > > +FILESEXTRAPATHS_prepend := "${THISDIR}/linux-obmc:"<br>> > > +SRC_URI += "</font></tt><a href=file://barreleye.cfgfg/><tt><font size=2>file://barreleye.cfg</font></tt></a><tt><font size=2>"<br>> > > +SRC_URI += "</font></tt><a href=file://hwmon_adm1278.patchch/><tt><font size=2>file://hwmon_adm1278.patch</font></tt></a><tt><font size=2>"<br>> > > --<br>> > > 2.7.1<br>> > ><br>> > ><br>> > > _______________________________________________<br>> > > openbmc mailing list<br>> > > openbmc@lists.ozlabs.org<br>> > > </font></tt><a href=https://lists.ozlabs.org/listinfo/openbmc><tt><font size=2>https://lists.ozlabs.org/listinfo/openbmc</font></tt></a><tt><font size=2><br>> > _______________________________________________<br>> > openbmc mailing list<br>> > openbmc@lists.ozlabs.org<br>> > </font></tt><a href=https://lists.ozlabs.org/listinfo/openbmc><tt><font size=2>https://lists.ozlabs.org/listinfo/openbmc</font></tt></a><tt><font size=2><br>> > <br>> > <br>> > <br>> > <br>> <br>> > _______________________________________________<br>> > openbmc mailing list<br>> > openbmc@lists.ozlabs.org<br>> > </font></tt><a href=https://lists.ozlabs.org/listinfo/openbmc><tt><font size=2>https://lists.ozlabs.org/listinfo/openbmc</font></tt></a><tt><font size=2><br>> <br>> <br>> -- <br>> Patrick Williams<br>> [attachment "signature.asc" deleted by Adriana Kobylak/Austin/IBM]
</font></tt><BR>