[PATCH v2 2/3] hwmon: (max31790): Support config PWM output becomes TACH

[Chanh Nguyen]

On 14/04/2024 15:03, Christophe JAILLET wrote:
> Le 14/04/2024 à 06:22, Chanh Nguyen a écrit :
>> PWMOUT pins on MAX31790 can be configured as a tachometer input pin by
>> setting bit[0] in the Configuration Register. When the bit[0] of a 
>> channel
>> is set, the PWMOUT pin becomes the tach input pin for the channel plus 
>> six.
>>
>> This commit allows the kernel to set those pins when necessary if the
>> maxim,pwmout-pin-as-tach-input DT property exists.
>>
>> Signed-off-by: Chanh Nguyen <chanh at os.amperecomputing.com>
>> ---
>> Changes in v2:
>>   - Update the vendor property name to 
>> "maxim,pwmout-pin-as-tach-input"   [Rob]
> 
> ...

Hi CJ, what does it mean?
> 
>> @@ -528,6 +532,33 @@ static int max31790_probe(struct i2c_client *client)
>>       if (err)
>>           return err;
>> +    if (device_property_present(dev, 
>> "maxim,pwmout-pin-as-tach-input")) {
>> +        err = device_property_read_u8_array(dev, 
>> "maxim,pwmout-pin-as-tach-input",
>> +                            pwmout_to_tach, NR_CHANNEL);
>> +        if (err) {
>> +            /* The maxim,pwmout-pin-as-tach-input is an array of six 
>> values */
>> +            dev_warn(dev, "The maxim,pwmout-pin-as-tach-input 
>> property exist but malform");
> 
> Nit: exists
> Nit: malformed or "is malformed"
> 

Thank CJ,

I'll update that in the patch v3

> CJ