[PATCH linux dev-6.1 v1 2/2] hwmon: Add support for ina233

[Delphine CC Chiu]

The INA233 device is a current, voltage and power monitor
with an I2C-, SMBus-,and PMBus-compatible interface
that is compliant with digital bus voltages from 1.8 V to 5.0 V.
The device monitors and reports values for current, voltage and power.
The integrated power accumulator can be used for energy
or average power calculations. Programmable calibration value,
conversion times and averaging when combined with an internal multiplier
enable direct readouts of current in amperes and power in watts.

Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu at wiwynn.com>
---
 drivers/hwmon/pmbus/Kconfig  |  9 ++++
 drivers/hwmon/pmbus/Makefile |  1 +
 drivers/hwmon/pmbus/ina233.c | 89 ++++++++++++++++++++++++++++++++++++
 3 files changed, 99 insertions(+)
 create mode 100644 drivers/hwmon/pmbus/ina233.c

diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index a40fafa42d32..4a852de5c487 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -470,4 +470,13 @@ config SENSORS_ZL6100
 	  This driver can also be built as a module. If so, the module will
 	  be called zl6100.
 
+config SENSORS_INA233
+        tristate "Texas Instruments INA233 and compatibles"
+        help
+          If you say yes here you get hardware monitoring support for Texas
+          Instruments INA233.
+
+          This driver can also be built as a module. If so, the module will
+          be called ina233.
+
 endif # PMBUS
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index e1a68d740c59..c5d547d9f304 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -49,3 +49,4 @@ obj-$(CONFIG_SENSORS_XDPE122)	+= xdpe12284.o
 obj-$(CONFIG_SENSORS_XDPE152)	+= xdpe152c4.o
 obj-$(CONFIG_SENSORS_ZL6100)	+= zl6100.o
 obj-$(CONFIG_SENSORS_PIM4328)	+= pim4328.o
+obj-${CONFIG_SENSORS_INA233} 	+= ina233.o
diff --git a/drivers/hwmon/pmbus/ina233.c b/drivers/hwmon/pmbus/ina233.c
new file mode 100644
index 000000000000..393b595344c5
--- /dev/null
+++ b/drivers/hwmon/pmbus/ina233.c
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Hardware monitoring driver for Texas Instruments INA233
+ *
+ * Copyright (c) 2017 Google Inc
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include "pmbus.h"
+
+#define MFR_CALIBRATION	0xd4
+
+struct pmbus_driver_info ina233_info = {
+	.pages = 1,
+	.format[PSC_VOLTAGE_IN] = direct,
+	.format[PSC_VOLTAGE_OUT] = direct,
+	.format[PSC_CURRENT_IN] = direct,
+	.format[PSC_CURRENT_OUT] = direct,
+	.format[PSC_POWER] = direct,
+	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
+	    | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT
+		| PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_POUT,
+	.m[PSC_VOLTAGE_IN] = 8,
+	.m[PSC_VOLTAGE_OUT] = 8,
+	.R[PSC_VOLTAGE_IN] = 2,
+	.R[PSC_VOLTAGE_OUT] = 2,
+};
+
+static int ina233_probe(struct i2c_client *client)
+{
+	int ret;
+	u16 shunt;
+	u16 current_lsb;
+	of_property_read_u16(client->dev.of_node, "resistor-calibration", &shunt);
+
+	ret = i2c_smbus_write_word_data(client, MFR_CALIBRATION, shunt);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to set calibration\n");
+		return ret;
+	}
+	ret = of_property_read_u16(client->dev.of_node, "current-lsb", &current_lsb);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to set current_lsb\n");
+		return ret;
+	} else {
+		// Referenced by table of Telemetryand WarningConversionCoefficients in datasheet
+		ina233_info.m[PSC_CURRENT_IN] = 1000 / current_lsb;
+		ina233_info.m[PSC_CURRENT_OUT] = 1000 / current_lsb;
+		ina233_info.m[PSC_POWER] = 40 / current_lsb;
+	}
+
+	return pmbus_do_probe(client, &ina233_info);
+}
+
+static const struct i2c_device_id ina233_id[] = {
+	{"ina233", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, ina233_id);
+
+static const struct of_device_id __maybe_unused ina233_of_match[] = {
+	{ .compatible = "ti,ina233" },
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, ina233_of_match);
+
+static struct i2c_driver ina233_driver = {
+	.driver = {
+		   .name = "ina233",
+		   .of_match_table = of_match_ptr(ina233_of_match),
+		   },
+	.probe_new = ina233_probe,
+	.id_table = ina233_id,
+};
+
+module_i2c_driver(ina233_driver);
+
+MODULE_AUTHOR("Eli Huang <eli_huang at wiwynn.com>");
+MODULE_DESCRIPTION("PMBus driver for Texas Instruments INA233 and compatible chips");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
+
-- 
2.25.1