[PATCH 2/7] ARM: dts: aspeed: mtjade, mtmitchell: Add new gpio-line-names
Joel Stanley
joel at jms.id.au
Wed Oct 11 12:48:44 AEDT 2023
On Thu, 5 Oct 2023 at 14:26, Chanh Nguyen <chanh at os.amperecomputing.com> wrote:
>
> Add new gpio-line-names from the Mt.Jade and Mt.Mitchell
> HW schematic.
>
> Mt.Jade
> GPIOB5: presence-cpu0
> GPIOF0: ps0-pgood
> GPIOF1: ps1-pgood
> GPIOG2: host0-shd-ack-n
> GPIOH0: uart1-mode1
> GPIOH1: uart2-mode1
> GPIOH2: uart3-mode1
> GPIOH3: uart4-mode1
> GPIOH7: i2c6-reset-n
> GPIOH3: host0-reboot-ack-n
> GPIOM4: s0-i2c9-alert-n
> GPIOM5: s1-i2c9-alert-n
> GPIOQ6: led-identify
> GPIOS0: s0-vr-hot-n
> GPIOS1: s1-vr-hot-n
> GPIOS5: vr-pmbus-sel-n
> GPIOY3: bmc-vga-en-n
> GPIOZ3: s0-rtc-lock
> GPIOAC2: spi0-program-sel
> GPIOAC3: spi0-backup-sel
>
> Mt.Mitchell:
> GPIOC3: bmc-debug-mode
> GPIOE1: eth-phy-int-n
> GPIOH0: jtag-program-sel
> GPIOH1: fpga-program-b
> GPIOW3: s1-pcp-pgood
>
> Signed-off-by: Chanh Nguyen <chanh at os.amperecomputing.com>
I didn't check that you had the assignments correct, but the structure
looks good.
Reviewed-by: Joel Stanley <joel at jms.id.au>
> ---
> .../dts/aspeed/aspeed-bmc-ampere-mtjade.dts | 42 +++++++++----------
> .../aspeed/aspeed-bmc-ampere-mtmitchell.dts | 9 ++--
> 2 files changed, 26 insertions(+), 25 deletions(-)
>
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts
> index e57efcc8522a..c87be433bdd0 100644
> --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts
> @@ -762,42 +762,42 @@
> gpio-line-names =
> /*A0-A7*/ "","","","host0-special-boot","","","","",
> /*B0-B7*/ "i2c-backup-sel","","","",
> - "power-button","","","",
> + "power-button","presence-cpu0","","",
> /*C0-C7*/ "","","","","","","","",
> /*D0-D7*/ "","","","","","","","",
> /*E0-E7*/ "","","","","","","","",
> - /*F0-F7*/ "","","power-chassis-control","s0-ddr-save","power-chassis-good",
> - "s1-ddr-save","","",
> - /*G0-G7*/ "host0-ready","host0-shd-req-n","","s0-overtemp-n","","",
> - "","",
> - /*H0-H7*/ "","","","","ps0-vin-good","ps1-vin-good","","",
> - /*I0-I7*/ "presence-ps0","presence-ps1","s1-special-boot",
> - "","","","","",
> - /*J0-J7*/ "s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n","",
> - "","","","",
> + /*F0-F7*/ "ps0-pgood","ps1-pgood","power-chassis-control","s0-ddr-save",
> + "power-chassis-good", "s1-ddr-save","","",
> + /*G0-G7*/ "host0-ready","host0-shd-req-n","host0-shd-ack-n",
> + "s0-overtemp-n","","","","",
> + /*H0-H7*/ "uart1-mode1","uart2-mode1","uart3-mode1","uart4-mode1",
> + "ps0-vin-good","ps1-vin-good","","i2c6-reset-n",
> + /*I0-I7*/ "presence-ps0","presence-ps1","s1-special-boot","","","","","",
> + /*J0-J7*/ "s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n",
> + "host0-reboot-ack-n","","","","",
> /*K0-K7*/ "","","","","","","","",
> /*L0-L7*/ "","","","host0-sysreset-n","s0-spi-auth-fail-n","","","",
> - /*M0-M7*/ "","","","","","","","",
> + /*M0-M7*/ "","","","","s0-i2c9-alert-n","s1-i2c9-alert-n","","",
> /*N0-N7*/ "","","","","","","","",
> /*O0-O7*/ "","","","","","","","",
> /*P0-P7*/ "","","","","","","","",
> - /*Q0-Q7*/ "","","","","","identify-button","","",
> - /*R0-R7*/ "","","ext-hightemp-n","",
> - "ocp-main-pwren","reset-button","","",
> - /*S0-S7*/ "","","","","rtc-battery-voltage-read-enable","","","",
> + /*Q0-Q7*/ "","","","","","identify-button","led-identify","",
> + /*R0-R7*/ "","","ext-hightemp-n","","ocp-main-pwren","reset-button","","",
> + /*S0-S7*/ "s0-vr-hot-n","s1-vr-hot-n","","",
> + "rtc-battery-voltage-read-enable","vr-pmbus-sel-n","","",
> /*T0-T7*/ "","","","","","","","",
> /*U0-U7*/ "","","","","","","","",
> /*V0-V7*/ "","","","","","","","",
> /*W0-W7*/ "","","","","","","","",
> /*X0-X7*/ "","","","","","","","",
> - /*Y0-Y7*/ "","","","","","","","",
> - /*Z0-Z7*/ "s0-plimit","s1-fault-alert","s1-fw-boot-ok","","",
> + /*Y0-Y7*/ "","","","bmc-vga-en-n","","","","",
> + /*Z0-Z7*/ "s0-plimit","s1-fault-alert","s1-fw-boot-ok","s0-rtc-lock","",
> "s1-sys-auth-failure-n","s1-overtemp-n","",
> /*AA0-AA7*/ "","","","","","","","",
> - /*AB0-AB7*/ "s1-hightemp-n","s1-plimit","s0-ddr-addr",
> - "s1-ddr-addr","","","","",
> - /*AC0-AC7*/ "sys-pwr-gd","","","","","","presence-cpu1",
> - "ocp-pgood";
> + /*AB0-AB7*/ "s1-hightemp-n","s1-plimit","s0-ddr-addr","s1-ddr-addr","","",
> + "","",
> + /*AC0-AC7*/ "sys-pwr-gd","","spi0-program-sel","spi0-backup-sel","bmc-ok",
> + "","presence-cpu1","ocp-pgood";
>
> i2c4-o-en-hog {
> gpio-hog;
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
> index 2f571b43106d..b7c4f7cfad07 100644
> --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
> @@ -575,16 +575,17 @@
> gpio-line-names =
> /*A0-A7*/ "","","","","","i2c2-reset-n","i2c6-reset-n","i2c4-reset-n",
> /*B0-B7*/ "","","","","host0-sysreset-n","host0-pmin-n","","",
> - /*C0-C7*/ "s0-vrd-fault-n","s1-vrd-fault-n","","",
> + /*C0-C7*/ "s0-vrd-fault-n","s1-vrd-fault-n","bmc-debug-mode","",
> "irq-n","","vrd-sel","spd-sel",
> /*D0-D7*/ "presence-ps0","presence-ps1","hsc-12vmain-alt2-n","ext-high-temp-n",
> "","bmc-ncsi-txen","","",
> - /*E0-E7*/ "","","clk50m-bmc-ncsi","","","","","",
> + /*E0-E7*/ "","eth-phy-int-n","clk50m-bmc-ncsi","","","","","",
> /*F0-F7*/ "s0-pcp-oc-warn-n","s1-pcp-oc-warn-n","power-chassis-control",
> "cpu-bios-recover","s0-heartbeat","hs-csout-prochot",
> "s0-vr-hot-n","s1-vr-hot-n",
> /*G0-G7*/ "","","hsc-12vmain-alt1-n","","","","","",
> - /*H0-H7*/ "","","wd-disable-n","power-chassis-good","","","","",
> + /*H0-H7*/ "jtag-program-sel","fpga-program-b","wd-disable-n",
> + "power-chassis-good","","","","",
> /*I0-I7*/ "","","","","","adc-sw","power-button","rtc-battery-voltage-read-enable",
> /*J0-J7*/ "","","","","","","","",
> /*K0-K7*/ "","","","","","","","",
> @@ -605,7 +606,7 @@
> /*V0-V7*/ "s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n",
> "host0-reboot-ack-n","s0-fw-boot-ok","host0-shd-req-n",
> "host0-shd-ack-n","s0-overtemp-n",
> - /*W0-W7*/ "","ocp-main-pwren","ocp-pgood","",
> + /*W0-W7*/ "ocp-aux-pwren","ocp-main-pwren","ocp-pgood","s1-pcp-pgood",
> "bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel",
> /*X0-X7*/ "i2c-backup-sel","s1-fault-alert","s1-fw-boot-ok",
> "s1-hightemp-n","s0-spi-auth-fail-n","s1-sys-auth-failure-n",
> --
> 2.17.1
>
More information about the openbmc
mailing list