[External] Re: [PATCH v2] i2c: aspeed: Fix i2c bus hang in slave read

Jian Zhang zhangjian.3032 at bytedance.com
Fri Oct 6 13:25:11 AEDT 2023


> From: "Andrew Jeffery"<andrew at codeconstruct.com.au>
> Date:  Fri, Oct 6, 2023, 08:20
> Subject:  [External] Re: [PATCH v2] i2c: aspeed: Fix i2c bus hang in slave read
> To: "Quan Nguyen"<quan at os.amperecomputing.com>, "Wolfram Sang"<wsa at kernel.org>, "Jian Zhang"<zhangjian.3032 at bytedance.com>
> Cc: "Andi Shyti"<andi.shyti at kernel.org>, "moderated list:ARM/ASPEED MACHINE SUPPORT"<linux-aspeed at lists.ozlabs.org>, <andrew at aj.id.au>, "moderated list:ARM/ASPEED I2C DRIVER"<openbmc at lists.ozlabs.org>, <yulei.sh at bytedance.com>, "open list"<linux-kernel at vger.kernel.org>, "Tommy Huang"<tommy_huang at aspeedtech.com>, "open list:ARM/ASPEED I2C DRIVER"<linux-i2c at vger.kernel.org>, <brendan.higgins at linux.dev>, <joel at jms.id.au>, <zhangjian3032 at gmail.com>, "moderated list:ARM/ASPEED MACHINE SUPPORT"<linux-arm-kernel at lists.infradead.org>, <xiexinnan at bytedance.com>
> On Thu, 2023-10-05 at 14:55 +0700, Quan Nguyen wrote:
> >
> > On 04/10/2023 13:08, Andrew Jeffery wrote:
> > > On Fri, 2023-09-29 at 09:39 +0200, Wolfram Sang wrote:
> > > > On Wed, Sep 27, 2023 at 11:42:43PM +0800, Jian Zhang wrote:
> > > > > When the `CONFIG_I2C_SLAVE` option is enabled and the device operates
> > > > > as a slave, a situation arises where the master sends a START signal
> > > > > without the accompanying STOP signal. This action results in a
> > > > > persistent I2C bus timeout. The core issue stems from the fact that
> > > > > the i2c controller remains in a slave read state without a timeout
> > > > > mechanism. As a consequence, the bus perpetually experiences timeouts.
> > > > >
> > > > > In this case, the i2c bus will be reset, but the slave_state reset is
> > > > > missing.
> > > > >
> > > > > Fixes: fee465150b45 ("i2c: aspeed: Reset the i2c controller when timeout occurs")
> > > > > Signed-off-by: Jian Zhang <zhangjian.3032 at bytedance.com>
> > > >
> > > > Somebody wants to add tags here? I think it should go to my pull request
> > > > this week.
> > > >
> > >
> > > I've tested this patch applied on top of fee465150b45 on an AST2600 and
> > > the the system behaviour doesn't seem worse. However, I can still lock
> > > the bus up and trigger a hung task panic by surprise-unplugging things.
> > > I'll poke around to see if I can get to the bottom of that.
> > >
> > > Resetting the slave state makes sense, so with the above observation
> > > aside:
> > >
> > > Tested-by: Andrew Jeffery <andrew at codeconstruct.com.au>
> > > Reviewed-by: Andrew Jeffery <andrew at codeconstruct.com.au>
> > >
> > > That said I do wonder whether we should update the slave state in the
> > > same place we're updating the hardware state. It would cover off the
> > > gap identified by Jian if it were to ever occur anywhere else.
> > > Something like:
> > >
> > > diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-
> > > aspeed.c
> > > index 5a416b39b818..28e2a5fc4528 100644
> > > --- a/drivers/i2c/busses/i2c-aspeed.c
> > > +++ b/drivers/i2c/busses/i2c-aspeed.c
> > > @@ -749,6 +749,8 @@ static void __aspeed_i2c_reg_slave(struct
> > > aspeed_i2c_bus *bus, u16 slave_addr)
> > >          func_ctrl_reg_val = readl(bus->base + ASPEED_I2C_FUN_CTRL_REG);
> > >          func_ctrl_reg_val |= ASPEED_I2CD_SLAVE_EN;
> > >          writel(func_ctrl_reg_val, bus->base + ASPEED_I2C_FUN_CTRL_REG);
> > > +
> > > +       bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE;
> > >   }
> > >
> > >   static int aspeed_i2c_reg_slave(struct i2c_client *client)
> > > @@ -765,7 +767,6 @@ static int aspeed_i2c_reg_slave(struct i2c_client
> > > *client)
> > >          __aspeed_i2c_reg_slave(bus, client->addr);
> > >
> > >          bus->slave = client;
> > > -       bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE;
> > >          spin_unlock_irqrestore(&bus->lock, flags);
> > >
> > >          return 0;
> > >
> > >
> >
> > We tested both Jian's patch and Andrew's patch on our MCTP-i2c bus
> > (ast2600 based BMC) and see both patches work well.
> >
> > We currently use upstream i2c-aspeed.c driver with the commit [1]
> > backported. Without that commit, we frequently experienced the bus hang
> > (due to bus arbitration) and it is unable to recover.
> >
> > But, by reverting that commit and with Jian or Andrew's patch, we see
> > the bus could be able to recover so we think both changes are good.
> >
> > [1]
> > https://github.com/AspeedTech-BMC/linux/commit/11a94e5918aa0f87c828d63fd254dd60ab2505e5
> >
> > Anyway, I would prefer Andrew's way because the bus->slave_state must
> > always be reset to ASPEED_I2C_SLAVE_INACTIVE everytime
> > __aspeed_i2c_reg_slave() is called.
>
> Jian, what's your preference? Are you happy to do a v3 along the lines
> of my suggestion above?
Thanks, LGTM,  I will send the patch v3.

Jian.
>
> Otherwise Wolfram can take v2 and we can always do the cleanup in a
> follow-up patch.
>
> Andrew


More information about the openbmc mailing list