[PATCH] ARM: dts: aspeed: Add Supermicro X13dem system BMC devicetree

lesly895 at gmail.com lesly895 at gmail.com
Tue May 9 10:11:02 AEST 2023


From: Ryan Sie <ryans at supermicro.com.tw>

Add a devicetree for the new X13dem system.

Signed-off-by: Ryan Sie <ryans at supermicro.com.tw>
---
 .../boot/dts/aspeed-bmc-supermicro-x13dem.dts | 283 ++++++++++++++++++
 1 file changed, 283 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed-bmc-supermicro-x13dem.dts

diff --git a/arch/arm/boot/dts/aspeed-bmc-supermicro-x13dem.dts b/arch/arm/boot/dts/aspeed-bmc-supermicro-x13dem.dts
new file mode 100644
index 000000000000..b5aac905e7ea
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-supermicro-x13dem.dts
@@ -0,0 +1,283 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2023 Supermicro Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "X13dem";
+	compatible = "aspeed,ast2600";
+
+	aliases {
+		mmc0 = &emmc;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory at 80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region at b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region at bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	leds {
+	    compatible = "gpio-leds";
+	    powerfail {
+		    gpios = <&gpio0 ASPEED_GPIO(G, 5) GPIO_ACTIVE_LOW>;
+	    };
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			<&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+};
+
+&adc0 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash at 0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi1:0";
+		spi-max-frequency = <25000000>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","","","","jpfr2","jpfr3",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","pwrfail-led","","",
+	/*H0-H7*/	"smc-n","nmi-n","pwrbtn-n","rst-n","","","phy1-rst","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","speaker-bmc",
+	/*P0-P7*/	"cpld-int","","","","","","","bmc-hbled-n",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","pwr-ctrl-4","","","",
+	/*S0-S7*/	"","","wake-n","","pwrok-in","pcie-rst-in","","uid-sw-in",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","bios-cmp-in","smci-pch-out","","","","nmi-in","bmc-ready",
+	/*Y0-Y7*/	"","bmc-hb-led","bmc-cpld-mux-sel","emmc-rst","","","sci-bmc-out","",
+	/*Z0-Z7*/	"bmc-prg-n","pwer-ctrl-1","pwrbtn-in","","","","","";
+};
+
+&gpio1 {
+	status = "disabled";
+};
+
+&sgpiom0 {
+	status = "disabled";
+	gpio-line-names =
+	/* SGPIO output lines */
+	/*OA0-OA7*/	"","","","","","","","",
+	/*OB0-OB7*/	"","","","","","","","",
+	/*OC0-OC7*/	"","","","","","","","",
+	/*OD0-OD7*/	"","","","","","","","",
+	/*OE0-OE7*/	"","","","","","","","",
+	/*OF0-OF7*/	"","","","","","","","",
+	/*OG0-OG7*/	"","","","","","","","",
+	/*OH0-OH7*/	"","","","","","","","",
+	/*OI0-OI7*/	"","","","","","","","",
+	/*OJ0-OJ7*/	"","","","","","","","",
+	/*DUMMY*/	"","","","","","","","",
+	/*DUMMY*/	"","","","","","","","",
+
+	/* SGPIO input lines */
+	/*IA0-IA7*/	"","","","","","","","",
+	/*IB0-IB7*/	"","","","","","","","",
+	/*IC0-IC7*/	"","","","","","","","",
+	/*ID0-ID7*/	"","","","","","","","",
+	/*IE0-IE7*/	"","","","","","","","",
+	/*IF0-IF7*/	"","","","","","","","",
+	/*IG0-IG7*/	"","","","","","","","",
+	/*IH0-IH7*/	"","","","","","","","",
+	/*II0-II7*/	"","","","","","","","",
+	/*IJ0-IJ7*/	"","","","","","","","";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+	status = "okay";
+};
+
+&kcs4 {
+	aspeed,lpc-io-reg = <0xca4>;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&mdio0 {
+	status = "okay";
+
+	ethphy0: ethernet-phy at 0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+			<&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "disabled";
+};
+
+&i2c2 {
+	multi-master;
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+	bus-frequency = <400000>;
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&xdma {
+	status = "okay";
+	memory-region = <&vga_memory>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
-- 
2.34.1



More information about the openbmc mailing list